eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  • Pushrod Flybarless

    Pushrod Flybarless

    With the Flybarless heads, the load on the pushrod become enormous.

    We producing 2.6mm hardened pushrods, especially for use with Flybarless heads.

    avaliable in 60, 65, 75mm. set of 4.

    SKU: FBLPSHRJX
    €6.00
    inc. VAT

     IN STOCK
  • QAV250 X4 250 FPV Quadcopter CNC Frame

    QAV250 X4 250 FPV Quadcopter CNC Frame

    QAV250 X4 250 FPV Quadcopter CNC Frame

    Specification:
     

    • Carbon Fiber and aluminum anodized RED/SILVER motor mount
    • Weight:95gr
    • Fasteners: Stainless Steel
    • Size: 250mm diagonally

    Motor Mount:
     

    • M3 16mm - 19mm (MT2206, 2204 2300kv)
    • Flight Controller Mount: 30.5mm x 30.5mm; 45mmx45mm
    • Board Camera Mount: 32mm x 32mm

    You'll need:
     

    • Propeller:  5x3 2 Blade  or 3blades size
    • ESC:  15amp
    • Battery: 3S 11.1v 1300mah 45C/90C, 3S 1400mah 40C/80C, 3S 1500mah 35C/70C
    • Flight Controller: Mini size
    • CCD Camera: f.ex SONY CCD 600TVL Mini 30mm X 30mm X 10mm FPV Camera
    • Antenna, etc...

    Package include:
     

    • 1 set QAV250  X4 250 FPV Quadcopter Frame

    Electrical equipment not included

    SKU: QAV250
    €83.90
    inc. VAT

  • QAV250 X4 250 FPV Quadcopter Combo

    QAV250 X4 250 FPV Quadcopter Combo

    This combo is a perfect Saving package deal. Included:

    1 QAV frame 4 Motors Emax 2206-1900
    4 Props HQ 6X4.5
    4 ESC simonK or Blheli 12 Amps
    1 CC3D controller

    Carbon Fiber and aluminum anodized RED/SILVER motor mount
    Weight:95gr
    Fasteners: Stainless Steel
    Size: 250mm diagonally

    SKU: QAVcombo
    €179.00

     LOW STOCK
  • QQ SUPER Multi-rotor Flight Control

    QQ SUPER Multi-rotor Flight Control

    QQ SUPER Multi-rotor Flight Control Built-in 3-axis Gyroscope for 4 axis 6 axis KK Upgrade

    Built-in three-axis gyroscope and three-axis acceleration sensor, support for self-stabilizing, super stable flight performance

    Support the general receiver, FUTABA S.BUS receiver, DSM2, DSMX 11MS, DSMX 22MS receiver, simplifying connection installation more convenient, ultra-bright LED

    Product Specifications:

    • Processor:32BIT ARM
    • Voltage:3.6V-8.4V
    • Current:60mA*
    • Output rate:360Hz
    • Dimension(L-W-H):43X29X13MM
    • Weight:13g

    Not include receiver and satelite

    Package includes:

    • 1xQQ super multi-rotor flight controller
    • 1x Chinese Manual
    • 1xEnglish Manual

    SKU: QQ-super
    €23.99
    inc. VAT

     IN STOCK
  • Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    • Used for a drone
    • Suit for a tube which dia is 15-30mm
    • Waterproof and 3 working modes
    • 2x2032 battery
    • Product weight:22g
    • Cool design suit for riding at night
    Material:

    • 100% nature friendly grade silicone,non-toxic
    • RED Aluminum anodized

    SKU: ALULED-017
    €12.00
    inc. VAT

     IN STOCK
  • Quad Cool Red LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    Quad Cool Red LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    • Housing Color: Red, Light color- Red
    • Material    Aluminum Alloy + Plastic
    Construction:

    • Water Resistant    Yes
    • Electronic Components
    • Output Current    60 mA
    • Flashlights
    • Flashlight Modes :2, Hi > Strobe
    • Switch Type    Forward Click
    Power & Batteries:
    • Batteries Included    Yes
    • Battery Form Factor    CR2032
    • Estimated Usage Time  3-6 hours
    Dimensions:
    • Depth    34.6 mm
    • Height    112 mm
    • Width    27.6 mm
    • Product Weight    28 g
    SKU: ALULED-016R
    €9.00
    inc. VAT

  • Quad Cool White LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    Quad Cool White LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    • Housing Color:black, Light color- White
    • Material    Aluminum Alloy + Plastic
    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    Construction:

    • Water Resistant    Yes
    • Electronic Components
    • Output Current    60 mA
    • Flashlights
    • Flashlight Modes    Hi > Strobe
    • Mode Count    2
    • Mode Memory    No
    • Switch Placement    Head
    • Switch Type    Forward Clicky
    Power & Batteries:

    • Batteries Included    Yes
    • Battery Form Factor    CR2032
    • Estimated Usage Time    3-6 hours
    Dimensions
    • Depth    34.6 mm
    • Height    112 mm
    • Width    27.6 mm
    • Product Weight    28 g
    SKU: ALULED-016
    €9.00
    inc. VAT

     IN STOCK
  • Quad Copter Frame Set S-604

    Quad Copter Frame Set S-604

    Features: Quick foldable, no tools required.
    Simple structure, easy to assemble, maintain and durable.
    Specifications:
    Weight: 335g
    SKU: 70410031
    €70.00
    inc. VAT

     72HR STOCK
  • Quad-Heli Front Led Light round BLACK (1pc)

    Quad-Heli Front Led Light round BLACK (1pc)

    This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
    Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

    Light Color: Red
    Case : Silicone red
    2 modes: Flash, Constant light
    Light visible till 300 Meters
    Power supply: 2x CR2032 per light (incl.)
    Weight: ±20g/light

    SKU: LEDLIGHTROUND-BLK
    €8.00
    inc. VAT

     IN STOCK
  • Quad-Heli Front Led Light round RED (1pc)

    Quad-Heli Front Led Light round RED (1pc)

    This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
    Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

    Light Color: Red
    Case : Silicone red
    2 modes: Flash, Constant light
    Light visible till 300 Meters
    Power supply: 2x CR2032 per light (incl.)
    Weight: ±20g/light

    SKU: LEDLIGHTROUND-RED
    €8.00
    inc. VAT

     IN STOCK
  • QUADCOPTER complete RTF, 4 motors

    QUADCOPTER complete RTF, 4 motors

    Our RTF Drones have been designed to meet RPAS regulations. Fits DGAC group S1-S2-S3

    Complete ready to fly foldable carbon frame drone with Flight controller of your choice.
    Delivery time is vary depends on the complexity , and may take 3 to 4 weeks.

    • Maximum flying weight 3,8 kg, A+3 series
    • Configuration - Quadcopter
    • Number of motors: 4 (optional to 8)
    • Diameter from motor to motor 600-650
    • Prop size 11-12"
    • Operating voltage 4-6s LIPO
    • Standard Flight Controller (Choice of electronics of Multiwii, Naza, Wookong, ZeroUAV)
    • Full carbon platform.

    Cameras to be used: Go pro
    Payload: up to 0.5kg ( not including the machine)
    Wind resistance:16KNT
    Operation: 1 man

    Included:

    • RTF machine, Assembled, tuned and tested
    • Camera mount :Go pro compatible
    • Video transmitter system 25mw
    • Spyro Antenna
    • Radio 8ch, with telemetry

    Needed to complete
    Charger

    Optional- Waypoints, Parachute, Led lamps, and more.

    Prices from 3699 eur- for complete quote, contact us directly by email sales@ercmarket.com

    SKU: RTFQUAD
    €3699.00
    inc. VAT

     72HR STOCK
  • Radial Ball bearing 3x7x3

    Radial Ball bearing 3x7x3

    Radial Ball bearing 3x7x3, Japanese, ABEC-5.

    SKU: BBRD-3X7X3
    €3.00
    inc. VAT

     IN STOCK
  • Radial ball bearing 6x10x2.5

    Radial ball bearing 6x10x2.5

    Radial ball bearing 6x10x2.5, ABEC5, made in Japan
    SKU: BBRD-6x10x2.5
    €5.00 €7.00
    inc. VAT

     IN STOCK
  • Radial ball bearing 6x10x3

    Radial ball bearing 6x10x3

    Radial ball bearing 6x10x3
    SKU: BBRD-6x10x3
    €4.00 €7.00
    inc. VAT

     IN STOCK
  • Radial ball bearing 6x12x4

    Radial ball bearing 6x12x4

    Radial ball bearing 6x12x4
    SKU: BBRD-6x12x4
    €4.00
    inc. VAT

     IN STOCK
  • Radial ball bearing 6x13x5

    Radial ball bearing 6x13x5

    Radial ball bearing 6x13x5
    SKU: BBRD-6x13x5
    €4.00
    inc. VAT

     IN STOCK
  • Raptor 30-50 Carbon fin set

    Raptor 30-50 Carbon fin set

    RAPTOR 30/50 - V1 - V2 & TITAN, TZ and other 50 class helis

    Cut-out 3D style carbon tail plane for minimal aerodynamic drag, CNC machined from highest quality multi laminated 2.0mm thick carbon composite. Lightweight and strong!

    SKU: RCMC-005CF
    €25.00 €28.00
    inc. VAT

  • Raptor 30-50 Carbon Vertical fin

    Raptor 30-50 Carbon Vertical fin

    30-50 size vertical fin only

    Cut-out 3D style carbon tail plane for minimal aerodynamic drag, CNC machined from highest quality multi laminated 2.0mm thick carbon composite. Lightweight and strong!

    SKU: RCMC-005V
    €12.00 €28.00
    inc. VAT

  • Raptor 60-90 3D fin set

    Raptor 60-90 3D fin set

    These carbon fibre tail fins for the RAPTOR 60-90 are available in solid and cut-out 3D styles.CNC machined from highest quality multi laminated carbon composite. Lightweight and strong!

    SKU: RCMC-007
    €25.00 €28.00
    inc. VAT

     IN STOCK
  • Raptor G4, E700 & E720 Pin Set

    Raptor G4, E700 & E720 Pin Set

    Pin Set

    Raptor G4, E700 & E720 Parts

    SKU: PV1612
    €1.90
    inc. VAT

     72HR STOCK
  • RAYDIOWARM Neck strap

    RAYDIOWARM Neck strap

    RAYDIOWARM Neck strap

    SKU: RAYDIOWARM
    €9.00
    inc. VAT

     IN STOCK
  • RC car building and repair services

    RC car building and repair services

    Broke your car, need replacement of parts, maintenance? assembly?

    We can help, now we offering building and repair service for Cars, made by experts.

    Our team will be happy to assist you with any need.

    Price is based on Hourly work. Estimation of service possible in certain cases in advance

    SKU: carbuilding
    €29.00

     72HR STOCK
  • RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

    RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

    RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

    This RC CellMeter-8 digital battery capacity checker is able to be used for LiPo LiFe Li-ion NiMH Nicd batteries.

    Features:

    • Support Battery Type:LiPo, LiFe, Li-ion, NiCd, NiMH
    • Servo Test Mode:Manual adjustment, Auto Matic, Neutral
    • Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz
    • Display Mode: Battery cell voltages, Total Voltages, Lowest cell voltage, Highest cell voltage, Voltage gap between highest cell voltage and Lowest cell voltage, Remaining battery capacity(%).
    • Discharge, Fast discharge

    Specifications:

    • Item size: 8.5 * 5 * 1.6cm
    • Item Weight: 40g
    • Package size: 10.5 * 10 * 2cm
    • Package Weight: 55g

    Package including:

    • Digital batteryt checker x1
    SKU: CELLM8
    €14.90
    inc. VAT

     IN STOCK
  • RC CITY Ball Links NEON - Rocket city, fits all helis 2-3mm thread

    RC CITY Ball Links NEON - Rocket city, fits all helis 2-3mm thread

    NEW - NEON COLOURED !!

    Made from the same low friction polymer resin as our regular "Rocket" ball links but now in high visibility neon orange, green and yellow.
    Suitable for use on 2.0 & 3 mm pushrods but EASILY can be re-drilled to suit up to a 3mm thread if required.

    Norlam Standard length shank measuring 22mm from ball centre to the end and are suitable for fitting to 3/16" (4.76mm) control balls.

    Shorter are 14mm* good for Servos for tail and other short applications

    Available in standard or short body versions.

    Supplied in packs of 10

    SKU: SKU14249
    €4.90
    inc. VAT

     IN STOCK

Manufacturers