eRCmarket

5.8G Helical Antenna (Right) for Receiver SMA

Helical Antenna 12dBi, 5.8GHz, Right hand circular polarization, SMA connector.
The circular polarization directional antenna, high gain, ideal for use in the video receiver when intending long ranges. The antennas are right hand circular polarization. Supplied with SMA connector and including a coaxial cable with SMA or PR-SMA (see spc).
 
Specification:
 

• Frequency: 5.8G
• Sliver plated line and 24K golden interface
• Used for receiver, with three-blade antenna on Tx.
• Suit for video receiver
• Right Hand Circular Polarization
• Interface: Please check pictures (please note the connector type you need when place an order) 

Package:
 

• 5.8G Helical Antenna x 1
• 15cm coaxial cable x 1

 

Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers and more 3D response for expert flyers.

Pack of 1 piece, 4mm diameter, 52cm long.

Very strong 2mm Silver Carbon Black material side frames for T-REX 600 Nitro version.

The frame set includes bearings installed. This upgrade is to improve over stock weak frame set which is only 1.6mm and are very easy to break.

Set inclusive of 2 frames and 2 Ball bearings

FF9/ 9C Transmitter SWITCH NUTS

Full set including 8 pcs and Removal/installation tool. For Futaba FF9/9C
You'll notice that the upper rim of the nut is smooth. Some Transmitters have the slots cut in the nuts had sharp corners. If you using to put the fingers between the switches, this got to be very irritating. Those nuts have smooth rim.
The colors are just a bonus

This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. WHITE.

Specifications:

• Base length is 14mm
• Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
• Cut the Nylon Collars to require length.
• Canopy Rubber Grommet openings diameter 7.2~7.5mm

Includes:

• 2x Fast Mounting Canopy Mount
• 2x M3x20 Set Screw
• 2x M3x16 Set Screw
• 2x Rubber Grommet
• 2x 7x6MM Nylon Collar
• 2x 7x8MM Nylon Collar
• 2x 7x10MM Nylon Collar

Adjustable Digital Soldering Station Esd 48W With Accessories

The ZD 931 Soldering Station is ideal for hobby electronics, school, workshop, service and labor.
Heat Settings are using the up/down button in 1 ° and 5 °C increments.
The soldering iron is connected using the 5 pin connector on the docking station.
With Soldering Iron Stand and viscose cleaning sponge in the drawer/Compact, robust and protective insulation housing/Station and COB HOLDERS Getrennt position/Rapid switching the soldering tip
Large LCD display with and is value/Temperature Control with electronic sensor/Quick heating time thanks to generously dimensioned power supply; high-performance 48 W SOLDERING IRON FOR A WIDE RANGE OF USES
Temperature Range from 145 and 450 °C/Optical and acoustic error message at malfunction/Surge Protection

Technical Data:

• Operating Voltage: 230 V (220 – 240 V), 50 Hz
• Soldering Iron Power: 48 W
• Device mains fuse: T 1 A/250 V
• 150 °C – 450 °C Temperature Range in 1 °C increments
• Display precision: 5%
• LC Display with the 3 1/2 Points
• Max. Power consumption: approx. Power
• Average Service Life of the heating element in soldering iron: approx. 500 hours
• Cable Length Between piston and plug: 1100 mm
• Dimensions (W x H x D): 185X100X150 MM
• Weight: Approx. 2.0 kg

Box Contents:

• Soldering Station ZD 931 with soldering iron holder and drawer with cleaning sponge
• Helping Hand with Magnifying Glass
• DESOLDERING PUMP
• Solder Wire, 1 mm, 10g in dispenser
• 2x Brush/Scraper 

AFV310 X4 Carbon fiber Quadcopter CNC Kit

Specification:

• Carbon Fiber and aluminum silver anodized motor mount
• Weight:95gr
• Fasteners: Stainless Steel
• Size: 310mm diagonally

Motor Mount:

• M2 12mm - 16mm (1806 2300kv)
• M3 16mm - 19mm (MT2206, 2204 2300kv)
• Flight Controller Mount: 30.5mm x 30.5mm; 45mmx45mm
• Board Camera Mount: 32mm x 32mm

You'll need:

• ESC:  15amp
• Battery: 3S 1500mah 35C/70C, 3S 2200mah
• Flight Controller: Mini size
• CCD Camera: f.ex SONY CCD 600TVL Mini 30mm X 30mm X 10mm FPV Camera;

Package include:

• 1 set AFV310  X4 FPV Quadcopter Frame

Electrical equipment not included

When it comes to brushless gimbals whether you are a pro-cinematographer or a multi-rotor hobbyist there is no question AlexMos controllers with Basecam (SimpleBGC) has set the mark in the industry for performance, ease of use and a host of user definable options.\

3 AXIS controller set.

Align T-Rex 700XN Super Combo with Engine, Muffler & FREE Fuel 4x5 Litres!

Content:

• T-REX 700XN Dominator Super Combo NEW 2018 model - RH70N11X
• 1 x FREE box of 4x5 Litres Optifuel OPTIMIX-20SLV Ready fuel

included

Engine:

• OS 105 HZ

Muffler:

RJX muffler for trex 700

Alu Fuel Cap with Integrated Fittings 

Dimension: D45×H15mm

Aluminium Blade holders fit Millenium, Nova, Cuatro, Dyna-x tail rotors, and increases the precision and rigidity of the tail, it also looks superb. Contents: Set of 2 blade holders