eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  • Hexagon Socket Button Head Screws M3X8/8 with Fullthread (10pcs)

    Hexagon Socket Button Head Screws M3X8/8 with Fullthread (10pcs)

    Specifications:

    • Size: M3X8/8
    • ISO 7380-1 A2 M 3X8/8
    • Hexagon socket button head screws with fullthread
    SKU: 7380123-8
    €3.00
    inc. VAT

     IN STOCK
  • Hexagon Socket Countersunk Head Cap Screws M4x14 Fullthread (10pcs)

    Hexagon Socket Countersunk Head Cap Screws M4x14 Fullthread (10pcs)

    Hexagon Socket Countersunk Head Cap Screws M4x14 Fullthread

    • Size: M4X14
    • ISO 10642 A4 M 4X14
    • Hexagon socket countersunk head screws with fullthread
    SKU: 1064244-14
    €3.00
    inc. VAT

     IN STOCK
  • Hexagon Socket Countersunk Head Cap Screws M4x16 Fullthread (10pcs)

    Hexagon Socket Countersunk Head Cap Screws M4x16 Fullthread (10pcs)

    Hexagon Socket Countersunk Head Cap Screws M4x14 Fullthread

    • Size: M4X16
    • ISO 10642 A4 M 4X16
    • Hexagon socket countersunk head screws with fullthread
    SKU: 1064244-16
    €3.00
    inc. VAT

     IN STOCK
  • Hexagon Socket Countersunk Head Screws M4x20 Fullthread (10pcs)

    Hexagon Socket Countersunk Head Screws M4x20 Fullthread (10pcs)

    Hexagon Socket Countersunk Head Cap Screws M4x14 Fullthread

    • Size: M4X20
    • ISO 10642 A4 M 4X20
    • Hexagon socket countersunk head screws with fullthread
    SKU: 799144-20
    €3.00
    inc. VAT

     IN STOCK
  • High adhesive 30 minute epoxy 200g

    High adhesive 30 minute epoxy 200g

    High adhesive 30 minute epoxy 200g resin 100g hardener 100g
    SKU: CN-650011
    €12.00
    inc. VAT

  • Hight powerful LED headlamps with large reflectors

    Hight powerful LED headlamps with large reflectors

    Hight powerful LED headlamps with large reflectors.

    This set contains 2 High Power super-bright LED's and reflectors.
    High efficiency and low rate of consumation: 0.5A
    The lights can be turned ON & OFF via a free channel on the receiver.
    They are suitable for R/C Aircraft, Helicoper, Multicopters, cars and boats.

    Data:

    Operating voltage: 2S LiPo (7.4V) via the JST-XH balance connector
    JST-XH connector operating voltage range: 6.5V -8.4V DC
    Control voltage input from receiver: 5.0V DC Maximum

    Specifications:

    • LED Housing dia.: 22mm
    • LED Housing depth: 21mm
    • JST-XH (2S) wire lenght: 180mm
    • Control/Receiver) wire lenght: 300mm
    • Control to LED wire lenght: 200mm
    • Power: up to 500mAh duration
    • Size of the control unit:: 30 x 12 x 10 mm
    SKU: C6860
    €17.90

  • HoBao Hyper MT Sport RTR 4WD 1/8th Scale Electric Monster Truck - White/BLUE

    HoBao Hyper MT Sport RTR 4WD 1/8th Scale Electric Monster Truck - White/BLUE

     HoBao Hyper MT Sport RTR 4WD 1/8th Scale Electric Monster Truck with Savox servo - White/BLUE

    High-powered brushless motors and LiPo batteries were almost made for models like the new Hyper Monster Truck. Available as a 99% ready-to-run or a rolling chassis for you to choose your own power systems the Hyper MT is ready to tear up the neighbourhood.

    HoBao are renowned for their excellent build quality, strong designs and value for money, and the Hyper MT is no exception. Featuring some modern styling to that old and dated Monster Truck look, the Hyper MT uses an aggressive cab forward style bodyshell with side rails, oversized 12cm diameter low profile spoked wheels that are married up to some high traction low profile block directional pattern tyres for the ultimate in handling and power transfer.

    Underneath the body, the Hyper MT features a convenient carry handle/roll bar to protect the brushless motor and speed control from damage. The trucks centre line is neatly balanced with the longitudinally mounted motor esc, sandwiched between twin side battery boxes for better handling and control. The main aluminium ladder/truss chassis carries a centre gearbox with gear reduction system. All transmission, differential and pinion gears are hard anodized steel for maximum durability.

    High quality Savöx digital metal-geared SC0252 10.kg servo handles the steering, while a waterproof Hobbywing 150A speed control and 2000kv sensorless brushless motor provides the power and control. Just couple up your choice of twin NiMH (up to 16 cells) or LiPo (either 2S or 3S type) battery for some insane speed runs.

    The 2.4ghz receiver is protected with the centre radio box for added security, with space for a separate receiver pack if you wish to use for high-powered aftermarket servos.

    Super stroke high volume oil filled aluminium shock absorbers soak up the terrain via the robustly designed symmetrical front and rear suspension arms, uprights, hub carriers and steering blocks. Adjustable left/right threaded steel turnbuckles provide fine simple suspension geometry adjustment for optimum performance.

    If you like your models big and fast, then the Hyper MT brushless ticks all the boxes and some!

    Hyper MT Sport Features:

    •   99% Ready-To-Run
    •   HoBao 2.4ghz 3 Channel radio system
    •   Hobbywing 150A brushless speed control
    •   2000kv Sensorless brushless motor
    •   Savox SC0252 10.5kg steering servo
    •   Heavy duty steel differential, pinion and transmission gears
    •   Low profile big lug tyres
    •   Low profile Giga star 17mm hex wheels
    •   Centre roll bar/handle
    •   Super stroke large volume oil filled shock absorbers
    •   Full aluminium truss chassis
    •   Large capacity receiver and battery box
    •   Enclosed gear reduction transfer case
    •   Clamp style motor mount for zero flex
    •   Side truss moulded battery holders with Velcro straps
    •   Adjustable stainless steel turnbuckles
    •   Symmetrical front and rear suspension arms, carriers and steering knuckles
    •   Aluminium hinge pin holders
    •   Rubber sealed ball bearings
    •   Moulded front and rear bumpers & skid plates
    •   Front ‘Gem’ bumper headlights
    •   Pre-painted custom styled bodyshell and accessories

    Spec Check:

    •   Length: 559mm
    •   Width: 432mm
    •   Height: 254mm
    •   Weight: 4852g


    Please Note: This kit requires a Wheel Wrench, Lipo Batteries and AA batteries for completion.
    (** NB:the battery packs required for the truck are two NiMH (up to 8-cell ‘flat’ type packs) or two LiPo batteries (2S or 3S) plus applicable charger. Batteries must be same type, voltage and capacity.**)

    SKU: HBMTE-S150O
    €529.00
    inc. VAT

     LOW STOCK
  • Holografic- Reflection Sticker set for Blades (Set of 4pcs)

    Holografic- Reflection Sticker set for Blades (Set of 4pcs)

    Holografic- Reflection Sticker set for Blades (Set of 4pcs)

    Hologram sticker for Main blades, improving visibility in the sky, and gives more "Bling" effect when flying.

    Set of 4pcs, available for 30-50 size and 60-90 size (Silver or Blue effect)

    Weight 0.09 gr (50 size )and 0.18 gr( 90size)

    SKU: RCM16358
    €3.50
    inc. VAT

     IN STOCK
  • HQProp 12x6R Thin Electric Carbon Composite Props 2pcs CCW for Multirotor

    HQProp 12x6R Thin Electric Carbon Composite Props 2pcs CCW for Multirotor

    New Graupner style electric thin prop made from composite materials, comes complete with adaptors, 12x6R. Best for Multicopters,
    Including 2 props in a set.

    Product specification:

    • Length: 12R
    • Pitch: 6
    • Material:Carbon Composite
    • Weight: 18g
    • Hub ID Dia: 6MM/8MM/9.5MM
    • Hub OD Dia: 17.8MM
    • Hub Thickness: 7.5MM
    • Adapter Rings: 3mm, 4mm, 5mm, 6mm

     

     

    SKU: HQP-TE12X6R
    €6.90
    inc. VAT

  • HYPE X3-Control Gyro system

    HYPE X3-Control Gyro system

    HYPE X3-Control Gyro system 

    The X3 Control is a 3-axis gyro system for stabilizing the attitude in surface models. The module can be used with any receiver system and is NOT linked to specific RC brands! The built-in motion sensors detect even the slightest movement of the model change at an early stage. Even before the human eye can perceive the movement of the model at all, the X3 Control already calculates a correction control pulse and sends it to the corresponding servo.

    The X3 module has 3-axis gyro and accelerometer sensors, which take control of the flight model in the three defined axes. A separate control channel, the module can be activated or deactivated in flight. In practice, support the X3 Control the pilot flying and the model can formally engage in the relevant flight position. Especially in gusty wind conditions, the model with the X3 Control is much calmer and more stable in the air.

    Specifications:

    • Input Voltage: 4.8-6V, current consumption approx: 48mA;
    • Dimensions including power strip: 47x23x10mm, weight (without cable): 3g

    Features:

    • 3-axis stabilization for airplanes
    • Adjustable control values ​​for each axis
    • Can be used with any remote control system!
    • Reversing the servo directions
    • Compact size
    • Light as a feather! Only 3g weight
    SKU: HYP27-1199
    €44.90
    inc. VAT

  • IBCrazy 5.8Ghz 10 Turn Helical Antenna

    IBCrazy 5.8Ghz 10 Turn Helical Antenna

    Helical antennas have been used for years as space satellite communication antennas. These antennas are suitable for moderate and long range and relatively high directivity. These helical antennas from "IBCrazy" are right hand circularly polarized (RHCP) with exceptional axial ratio and multipath rejection.

    Couple these antennas with a Cloverleaf, Mad Mushroom, or Skew Planar wheel antenna for best performance.

    SPMA male connector fitted

    Please note VAS antennas are hand built and professionally tuned by the one and only IBCrazy to offer maximum performance.

    SKU: VAS-1002
    €35.00 €39.90
    inc. VAT

     LOW STOCK
  • IBCrazy 5.8Ghz 3 Turn Helical Antenna

    IBCrazy 5.8Ghz 3 Turn Helical Antenna

    Helical antennas have been used for years as space satellite communication antennas. These antennas are suitable for moderate and long range and relatively high directivity. These helical antennas from "IBCrazy" are right hand circularly polarized (RHCP) with exceptional axial ratio and multipath rejection.
    Couple these antennas with a Cloverleaf, Mad Mushroom, or Skew Planar wheel antenna for best performance.
    SPMA male connector fitted

    Please note VAS antennas are hand built and professionally tuned by the one and only IBCrazy to offer maximum performance.

    SKU: VAS-1004
    €32.00
    inc. VAT

  • IBCrazy 5.8Ghz 5 Turn Helical Antenna

    IBCrazy 5.8Ghz 5 Turn Helical Antenna

    Helical antennas have been used for years as space satellite communication antennas. These antennas are suitable for moderate and long range and relatively high directivity. These helical antennas from "IBCrazy" are right hand circularly polarized (RHCP) with exceptional axial ratio and multipath rejection.

    Couple these antennas with a Cloverleaf, Mad Mushroom, or Skew Planar wheel antenna for best performance.

    SPMA male connector fitted

    Please note Video Aerial Systems antennas are hand built and professionally tuned by the one and only IBCrazy to offer maximum performance.

    SKU: VAS-1003
    €32.00
    inc. VAT

  • Ignition Mini Tachometer CDI

    Ignition Mini Tachometer CDI

    Ignition Mini Tachometer CDI

    Mini tachometer from Rcexl for use with electronic ignition systems like the CDI.
    Indicates up to 30000 rpm.

    Mini Tachometer:

    1. Contains PIC16f628a microcontroller
    2. Does not need seperate battery, powered from the ignition
    3. Standard FUTABA plug(Black-Negative Red-Positive and White-Signal)
    4. Using high-brightness LED display
    5. Input voltage range:3.5V-8.4V
    6. Current consumption 25mA-60mA
    7. Mini tachometer indicates up to 30000 rpm
    8. Actual RPM= Display Digital *10
    9. Body Size: 41mm L x 17mm W x 12mm H
    10.Window Size: 30mm L x 15mm H
    11.Weight:8.5g  (0.3OZ)
     
    Instructions:


    1.Connect the Y wire between the HALL sensor and the ignition.
    2.Connect the tachometer plug to the other end of the Y wire.
    3.Connect the power supply to the ignition and the tachometer will display the rpm / 10.

    SKU: C5004
    €16.90

  • IKON FLYBARLESS SYSTEM

    IKON FLYBARLESS SYSTEM

    Ikon system- if not availiable, we will deliver the MSH brain instead.
    SKU: IKN1001
    €230.00
    inc. VAT

     72HR STOCK
  • In-Tank Fuel Filter/Clunk

    In-Tank Fuel Filter/Clunk

    In-Tank Fuel Filter/Clunk, 19X32X47MM
    SKU: AV005-02101
    €6.00
    inc. VAT

     IN STOCK
  • IN-Tank Fuel Line

    IN-Tank Fuel Line

    Silicone line, 2mm x 3,5mm . special for use in fuel tanks.Very flexible. Pack of 1 meter

    SKU: SKU8138
    €3.00
    inc. VAT

     IN STOCK
  • Infrared Temp Device

    Infrared Temp Device

    For the RC hobby, Infrared Temperature device is an amazing tool that help to keep your models running at peak performance. Nothing is quicker or more accurate than a handheld infrared Temp Device, and now,

    They are available at a price everyone can afford.

    Along with their extremely convenient and portable size, these Infrared temperature measurement devices also feature an incredibly handy Min/Max reading.

    SKU: HT-E011
    €39.00 €43.00
    inc. VAT

     LOW STOCK
  • Infrared Temp GUN

    Infrared Temp GUN

    For the RC hobby, Infrared Temperature GUN is an amazing tool that help to keep your models running at peak performance. Nothing is quicker or more accurate than a handheld infrared Temp Device, and now,

    They are available at a price everyone can afford.

    Along with their extremely convenient and portable size, these Infrared temperature measurement devices also feature an incredibly handy Min/Max reading.

    FEATURES

    · Laser aim

    · Infra-red technology

    · LCD display

    · Temperature range: -20 to 520°C

    · Accuracy: ± 2% = ± 2°C

    · Power supply: 1 x 9V battery (included)

    · Dimensions: 155x 85 x45mm

    · Weight: 160gr

    SKU: ELIX15138
    €79.00
    inc. VAT

     72HR STOCK
  • Intake funnel for Zenoah (Velocity stack)

    Intake funnel for Zenoah (Velocity stack)

    Intake funnel for Zenoah G260PU / G231PUM / G260PUM engines

    SKU: DDMAF492
    €13.00
    inc. VAT

  • JR-SPEKTRUM TX Switch Nuts

    JR-SPEKTRUM TX Switch Nuts

    JR and SPEKTRUM Transmitter SWITCH NUTS

    Full set including 8 pcs and Removal/installation tool. WILL NOT WORK ON THE 12X or 8103.

    You'll notice that the upper rim of the nut is smooth. Some Transmitters have the slots cut in the nuts had sharp corners. If you using to put the fingers between the switches, this got to be very irritating. Those nuts have smooth rim.
    The colors are just a bonus

    SKU: ELRC602G
    €16.00
    inc. VAT

     LOW STOCK
  • JR/HIT Anodized TX Sticks Short

    JR/HIT Anodized TX Sticks Short

    Give your radio a bling look.
    CNC sticks for JR or Hitec transmitters

    Set of 2.

    SKU: KRW136
    €8.00
    inc. VAT

     IN STOCK
  • JST Square connectors

    JST Square connectors

    JST connectors set Male+Female 170mm. Good for up to 10 amps.

    SKU: KRL0657
    €3.00
    inc. VAT

     IN STOCK
  • JST-XH Wire Extension 6S

    JST-XH Wire Extension 6S

    Your battery too close to the balancer? This is exactly  what you need!
    This cable to be used with Lipo balancer, extention of 30cm, fit JST connectors such as Align, Optipower and others.

    Fit batteries up to 6S

    SKU: RB-4014JST
    €4.00
    inc. VAT

     IN STOCK

Manufacturers