eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  •  36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    Specification:

    • Beam angle: 120°
    • Power consumption: 1.7W
    • Voltage: DC 12V
    • Lumens: 140-160LM
    • SMD : 3014 (36 LED)
    • Size: 30 (dia) x 41mm (total lenght)
    Material:

    • Composite
    SKU: G4-B36LED-2W
    €5.00
    inc. VAT

     IN STOCK
  •  DSR-NR46/R46 Driving Gear for retracts

    DSR-NR46/R46 Driving Gear for retracts

    Replacement  DSR-NR46/R46 Driving Gear for retracts

    SKU: R46301
    €18.00
    inc. VAT

     LOW STOCK
  •  DYX-0021 Dyna-X frame

    DYX-0021 Dyna-X frame

    Set of 1 frame, or complete set including the ground plate DYX0021

    SKU: SKU11143
    €52.00
    inc. VAT

     IN STOCK
  •  Hex Cap Screw M3x14(10pcs) DIN 912, A2 stainless steel

    Hex Cap Screw M3x14(10pcs) DIN 912, A2 stainless steel

    Socket head cap screws are a headed and externally threaded part designed for insertion through a close tolerance, internally tapped hole and mated with a nut.
    Hex Cap Screw M3x14 (10 pcs) DIN 912 Stainless screws, 10 pcs in set
    Made from A2 stainless steel .Designed with hex socket head and Stainless material

    SKU: RCCS-3x14
    €3.00
    inc. VAT

     IN STOCK
  • !Multicopter Building service

    !Multicopter Building service

    Build your Multi rotor in a NASA way, by experts.

    Building a Drone is not a straight forward. Proper installation is a  hassle, especially cheap motors and electronics are very simplified, and require a lot of "Know how".

    Non experienced people can take up to hundred hours to build one model and still suffer from bad Vibrations, programming complexes, Tuning, and much more.

    We are offering "One stop" service for all your needs.

    All the service explained HERE

    Using our own components, we have tested over 200 machines, and over 2000 Flying hours, we will deliver :

    1-Complete building of the frame, mechanically and electronic wise.

    2- All motors and props are Fully Dynamic balanced

    3- Controllers (ESC) and Flight controller are fully programmed per your needs

    4- With your radio we will set up and make the machine ready to fly

    5- Live flight ( Basic setup) demonstration on delivery

    Optional: if you need other components such camera, GPS , we can also program all for your custom needs.

    Finished machine is ready to fly, without any vibrations, so you can enjoy your Drone flying  and start Working with it for professional or Hobby use.

    Customers who located abroad of  Belgium can send us their own radios and we will return all together after proper packaging and flight tests.
    Video will be provided to demonstrate the machine in flight

    Delivery time is vary.

    Extra components Such gimbal, FPV, Telemetry and all extrras over the Drone installation installation can be done on demand, not included in the price. Fees are vary, please contact us for more detailed Quote.
    SKU: DroneBuild
    €299.00

     IN STOCK
  • "AAA" Lipo monitor Voltage Alarm - for 14.8v 4S Lipo batteries

    "AAA" Lipo monitor Voltage Alarm - for 14.8v 4S Lipo batteries

    This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

    Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

    Special Light led and sound will be heard / seen from long distance.

    This product designed to work with ALL lipos 2S - 7.4v

    Working status as following:

    - 14.8 v+ Blue light shines
    - 14.8~13.6v Blue light flashs
    - 13.6~13.2v, Red light shines
    - Below 13.2v, Red light flashing & Beep
      From this time, you have around 30 seconds to land ( More then enough time )

    SKU: MXMON148
    €8.50
    inc. VAT

     IN STOCK
  • "AAA" Lipo monitor Voltage Alarm - for 18.5v 5S Lipo batteries

    "AAA" Lipo monitor Voltage Alarm - for 18.5v 5S Lipo batteries

    This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

    Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

    Special Light led and sound will be heard / seen from long distance.

    This product designed to work with ALL lipos 5S 18.5V

    Working status as following:

    - 18.5 v+ Blue light shines
    - 18.5~18.1v Blue light flashs
    - 18.1~17.8v, Red light shines
    - Below 17.8v, Red light flashing & Beep
       From this time, you have around 30 seconds to land ( More then enough time )

    SKU: MXMON185
    €8.50
    inc. VAT

     IN STOCK
  • "AAA" Lipo monitor Voltage Alarm - for 22.2v 6s Lipo batteries

    "AAA" Lipo monitor Voltage Alarm - for 22.2v 6s Lipo batteries

    This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

    Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

    Special Light led and sound will be heard / seen from long distance.

    This product designed to work with ALL lipos 6S- 22.2V

    Working status as following:

    - 22.2 v + Blue light shines
    - 22.2~20.4 v Blue light flash
    - 20.4~19.8 v, Red light shines
    - Below 19.8 v, Red light flashing & Beep
      From this time, you have around 30 seconds to land ( More then enough time )

    SKU: MXMON222
    €8.50
    inc. VAT

  • "AAA" Lipo monitor Voltage Alarm - for 7.4v 2S Lipo batteries

    "AAA" Lipo monitor Voltage Alarm - for 7.4v 2S Lipo batteries

    This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

    Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

    Special Light led and sound will be heard / seen from long distance.

    This product designed to work with ALL lipos 2S - 7.4v

    Working status as following:

    - 7.4 v+ Blue light shines
    - 7.4~6.8v Blue light flashs
    - 6.8~6.6v, Red light shines
    - Below 6.6v, Red light flashing & Beep
       From this time, you have around 30 seconds to land ( More then enough time )

    SKU: MXMON74
    €8.50
    inc. VAT

     IN STOCK
  • 12 MZ/FG, 14MZ  Switch Nuts

    12 MZ/FG, 14MZ Switch Nuts

    Personalize your transmitter with these colorful aluminum switch nuts. Fits  Futaba 12 MZ/FG, 14MZ
    Full set including 8 pcs and Removal/installation tool.
    You'll notice that the upper rim of the nut is smooth. Some Transmitters have the slots cut in the nuts had sharp corners. If you using to put the fingers between the switches, this got to be very irritating. Those nuts have smooth rim.
    Color is Green

    SKU: ELRC601
    €16.00
    inc. VAT

     IN STOCK
  • 2-Axis Midi SLR Tilt-Roll Camera Mount Kit

    2-Axis Midi SLR Tilt-Roll Camera Mount Kit

    Pan-Roll is for RC Heli or Drone Camera Mount Kit , allow 2-Axis control system.
    The Pan-Title itself is a stand alone product.It will fit camera up to 125mm wide
    It can also be installed on any Aero-planes like Quad-Copter or RC Helis generally through cable ties.
    Let your RC stuff become an Aero-Spy.

    Features:

    •     2-Axis Controllable
    •     3K Carbon Fiber made
    •     Easy to be installed
    •     Light weight and durable

    Package content:

        2-Axis Pan-Roll Camera Mount Upgrade Un-assembled Kit

    Requirement:

    • Mini servo
    • Gyro- optional

    It can also be installed on any aircraft like a Quad-Copter or RC Heli's generally through cable ties.

    SKU: 40720225
    €99.00
    inc. VAT

     IN STOCK
  • 24 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    24 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    24 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    Specification:

    • Beam angle: 120°
    • Power consumption: 1.7W
    • Voltage: DC 12V
    • Lumens: 140-160LM
    • SMD : 2835 (24 LED)
    • Size: 30 (dia) x 40mm (total lenght)
    Material:

    • Composite
    SKU: G4-B24LED-2W
    €4.00
    inc. VAT

     IN STOCK
  • 28mm Telescope Strut Shock Shaft

    28mm Telescope Strut Shock Shaft

     
    Instructions:

    • High precision CNC cutting
    • Light, and more strength.


    Specifications:

    • Material:High impact Aluminum Alloy
    • Weight: 3.3g (approx.)


    SKU: R46221
    €3.49
    inc. VAT

     LOW STOCK
  • 3 Functions Tool

    3 Functions Tool

    Screw Driver - special size to allow Engine carburator adjustment, acting also as Plug holder and Piston locker. all in one.

    SKU: RCTO-023
    €5.00 €9.00
    inc. VAT

     LOW STOCK
  • 30-50 Size Carbon Boom support

    30-50 Size Carbon Boom support

    Carbon Boom support, with CNC caps

    SKU: RCUO-102
    €16.00 €18.00
    inc. VAT

     72HR STOCK
  • 360 mm 3D CF blades

    360 mm 3D CF blades

    High quaity blades, for Micro helicopters. The Extreme composite blades are considered by many Pro flyers as the best micro rotor blades money can buy. These ultra light blades are super smooth cutting through the air with great ease. The Extreme blades produce absolutely magnificent flying characteristics from superb stability to breath taking 3D performance

    SKU: RJXHA360
    €28.00 €35.00
    inc. VAT

  • 3D AL Servo Horn

    3D AL Servo Horn

    Metal Servo arm for heavy duty applications, Helicopters, Airplanes, cars and Boats.

    Use it where you need extre reinforcement for your servo, iliminating any slope !

    Set including 4 arms with hardware, 40mm length.

    SKU: KRC376
    €6.00
    inc. VAT

     IN STOCK
  • 3mm shaft

    3mm shaft

    3mm shaft for ALU gear box
    SKU: KRF922-3
    €1.27
    inc. VAT

     IN STOCK
  • 3rd bearing Block Robbe

    3rd bearing Block Robbe

    This block is to use in Robbe helicopters, as third block supporting the main shaft. This will prevent any free flex between the frames.

    SKU: RCRO-004
    €18.00 €24.00
    inc. VAT

     LOW STOCK
  • 3rd Hand assistant- Helping Hand with Magnifier

    3rd Hand assistant- Helping Hand with Magnifier

    Helping Hand with Magnifier

    Component holder from nickel-plated steel with 2 flexible clip terminals, magnifier (2.5-times) and heavy screw feet.
    Helping Hand with Magnifier Big Image

    You will have a third hand, e.g. to clamp a board, while you do your work with the component.

    • 6 lockable hinges
    • Nickel-plated steel
    • Heavy screw feet
    • Magnifier with 2.5-times enlargement
    • 2 clip terminals
    SKU: ZD-10D
    €8.90
    inc. VAT

  • 40A switching power supply

    40A switching power supply

    40 A switching power supply to use for:

    voltage adjustable 3-15 V or fixed 13.8 V
    LED current and voltage meter

    Output :3-15 v, 40 A, 600 W
    Dimensions: 220x110x320
    Weight : 3.54 kg

    SKU: RB8539
    €199.00
    inc. VAT

  • 5 Bright white LED 5W DC12V. 140-160LM (1pc)

    5 Bright white LED 5W DC12V. 140-160LM (1pc)

    5 Bright white LED 5W DC12V. 140-160LM (1pc)

    Specification:

    • Beam angle: 360°
    • Power consumption: 1.5W
    • Voltage: DC12V
    • Lumens: 140-160LM
    • Size: 25x13mm
    Material:

    • Aluminum cage
    SKU: G4-5A-5W
    €6.90
    inc. VAT

     IN STOCK
  • 5 Bright white LED 7.5W DC12V. 180-200LM (1pc)

    5 Bright white LED 7.5W DC12V. 180-200LM (1pc)

    5 Bright white LED 7.5W DC12V. 180-200LM (1pc)

    Specification:

    • Beam angle: 360°
    • Power consumption: 2.2W
    • Voltage: DC12V
    • Lumens: 180-200LM
    • Size: 35x19mm
    Material:

    • Aluminum cage
    SKU: G4-6A-7.5W
    €9.90
    inc. VAT

     IN STOCK
  • 5,8 GHz 12dBi AV/RX Directional Antenna

    5,8 GHz 12dBi AV/RX Directional Antenna

    This 5.8 ghz high gain patch antenna (12dBi) has a substantially higher range than the stock omni whip antenna.

    • Its light weight is perfect for a pan and tilt antenna or antenna tracker unit
    • Only measures 8 1/2 inches square (8 inches each side)
    • Low loss solid brass elements
    • 3 foot coax lead with SMA Male connector
    • Can be mounted for vertical or horizontal polarization
    • You can use this antenna with any of our 5.8 ghz Receivers here
    SKU: IMRC12DBI
    €89.99
    inc. VAT

     72HR STOCK

Manufacturers