Airplane Propellers

Airplane Propellers

Here you can find fine selection of Propellers for All aircraft

Products


  • 5x2.75 Electric Propeller

    5x2.75 Electric Propeller

    5x2.75 Electric Propeller: UMX Beast, Sbach 342
    by E-flite
    SKU: EFLUP050275
    €5.00
    inc. VAT

     LOW STOCK
  • 9X3.8 E Propeller

    9X3.8 E Propeller

    Composit Prop 9X3.8 Electro

    Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
    Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

    - Composite Propeller
    - Suitable GP & EP

    SKU: RCT9X3.8E
    €1.80
    inc. VAT

     IN STOCK
  • 9X4.7 E PropelleR

    9X4.7 E PropelleR

    Composit Prop 9X4.7 Electro

    Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
    Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

    - Composite Propeller
    - Suitable GP & EP

    SKU: RCT9X4.7E
    €1.80
    inc. VAT

     LOW STOCK
  • Aeronaut CAM-Carb-Bl.12,0x 6,0"

    Aeronaut CAM-Carb-Bl.12,0x 6,0"

    Aeronaut CAM-Carb-Bl.12,0x 6,0"

    The new generation of folding propellers from Rudolf Freudenthaler, exploiting CAM technology.
    The very thin, carefully optimised blade profile and computer-calculated airfoil sections guarantee very high accuracy and excellent efficiency combined with low power absorption from the electric motor.
    All blades are made exclusively from a mixture of carbon fibres and nylon, which has proved excellent in our propellers over many years, as it endows the blades with very high torsional rigidity.
    These blades are very light in weight thanks to the extremely thin blade profile and the materials employed.

    Technical information:

    • max RPM [1/min] 13000
    • Size in cm 30,5x15,0cm
    • Size in inch 12,0x6,0"
    • Diameter / Pitch [cm]:     30 x 15
    • Diameter / Pitch [inch]:     12 x 6
    • Piece / Pack:     1 Paar
    • Type:     CAM FOLDING PROP
    SKU: AE-723436
    €9.00
    inc. VAT

     IN STOCK
    NEW
  • Aeronaut Clamping cone Al.M8/4,0mm

    Aeronaut Clamping cone Al.M8/4,0mm

    Aeronaut CN-Spinner 36/4,00mm

    Technical information:

    • Front bore [mm] M2,5
    • Thread M8
    • thread-free length [mm] 7,5
    • Length [mm] 26
    • Motor shaft Ø [mm] 4
    • Shaft Ø [mm] 8
    SKU: AE-712404
    €4.90
    inc. VAT

     IN STOCK
    NEW
  • Aeronaut CN-Spinner 36/4,00mm

    Aeronaut CN-Spinner 36/4,00mm

    Aeronaut CN-Spinner 36/4,00mm

    Technical information:

    • Motor shaft Ø [mm] 3
    • Spinner Ø [mm]  36
    SKU: AE-725944
    €16.90
    inc. VAT

     IN STOCK
    NEW
  • Aeronaut Precision-Spinner 36/4,00mm

    Aeronaut Precision-Spinner 36/4,00mm

    Aeronaut Precision-Spinner 36/4,00mm

    Technical information:

    • Motor shaft Ø [mm] 3
    • Spinner Ø [mm]  36
    SKU: AE-725224
    €14.50
    inc. VAT

     IN STOCK
    NEW
  • ALU SCALE XPower SPINNER Ø36/Ø4mm

    ALU SCALE XPower SPINNER Ø36/Ø4mm

    ALU SCALE XPower SPINNER Ø36/Ø4mm

    Specifications:

    • The particular drawing of the spinner makes it possible “to slip by” perfectly to the fuselages of scale sailplanes.
    • The shape in Z of the propeller hub allows a perfect retraction of the blades along the fuselage.
    • High quality aluminium spinners for electric sailplanes.
    • Cnc machined aluminium spinner.
    • Aluminium propeller hub with treaded blade attachments.
    • COLLET ASSEMBLY: Slotted precision made aluminium taper collet.

    Dimensions:

    • A=Spinner diameter: Ø36 mm
    • J=For motor shaft: Ø4 mm
    • C=Distance between blade screws: 42 mm
    • G=Blade screw : Ø3 mm
    • F=For blade root width: 8 mm
    SKU: TOP-099S1515
    €15.90
    inc. VAT

     LOW STOCK
    NEW
  • APC  PROP 12/14

    APC PROP 12/14

    APC prop

    sizes : 12 x 4 / 12 x 5 / 14 x 6

    SKU: APC1214
    €7.00
    inc. VAT

     IN STOCK
  • APC Propeller 5x5

    APC Propeller 5x5

    APC propeller 5X5, Fit shaft of 6mm

    PROPELLER specs.

    •   APC Electric propellers have been designed specifically for electric powered model airplanes.
    •   APC Computer optimized design gives these propellers a thinner profile and more "bite" with less weight compare to standard glow propellers.
    •   Lightweight molded nylon construction reduces rotating mass for less drag and more efficiency.

    SKU: APCMC5x5
    €3.00
    inc. VAT

     IN STOCK
  • APC-Propeller 10x 3.8 Slow Fly

    APC-Propeller 10x 3.8 Slow Fly

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: APC10X3.8sf
    €4.00
    inc. VAT

     IN STOCK
  • APC-Propeller 10x 3.8SF PUSHER

    APC-Propeller 10x 3.8SF PUSHER

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: APC10X3.8SFP
    €5.60
    inc. VAT

     IN STOCK
  • APC-Propeller 10X5 electro

    APC-Propeller 10X5 electro

    APC props are manufactured using a pultrusion process.
    This method causes the fiberglass "fibers" to be oriented axially in 1/2" long pellets, allowing for a higher fiber (60%) to resin (nylon binder) density. Providing substantially higher strength and stiffness than glass filled nylon.
    The additional stiffness is beneficial to control of vibration resonance response. The higher strength allows the use of thinner cross-sections, beneficial to weight and aerodynamic efficiency.

    Competition proven. Dark gray composite material.

    Diameter x Pitch in inches:10X 5, special for electric planes.

    SKU: APC10X5E
    €5.00
    inc. VAT

     IN STOCK
  • APC-Propeller 10x6 Slow fly

    APC-Propeller 10x6 Slow fly

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: 77851006
    €4.20
    inc. VAT

     IN STOCK
  • APC-Propeller 10x7 slow fly

    APC-Propeller 10x7 slow fly

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: 77881007
    €4.50
    inc. VAT

  • APC-Propeller 10X7 Slow Fly

    APC-Propeller 10X7 Slow Fly

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: APC10X7SF
    €4.00
    inc. VAT

     LOW STOCK
  • APC-Propeller 11.5X6 Sport

    APC-Propeller 11.5X6 Sport

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    size 11.5x6 for Glow and Electric

    SKU: APC11.5X6
    €4.90
    inc. VAT

     LOW STOCK
  • APC-Propeller 11X4 Slow Fly

    APC-Propeller 11X4 Slow Fly

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: 77881104
    €4.90
    inc. VAT

     LOW STOCK
  • APC-Propeller 11X4.7 Slow Fly

    APC-Propeller 11X4.7 Slow Fly

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    SKU: APC11X4.7SF
    €5.00
    inc. VAT

     LOW STOCK
  • APC-Propeller 12.25X3.75 Sport

    APC-Propeller 12.25X3.75 Sport

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    Diameter x Pitch in inches: 12.3x3.8

    SKU: 77851203
    €7.50
    inc. VAT

     LOW STOCK
  • APC-Propeller 13x6.5 Electric

    APC-Propeller 13x6.5 Electric

    Precision for ultimate power
    APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
    possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
    You too can benefit from these advantages - just move up to APC propellers!

    size 13x6.5 for Glow and Electric

    SKU: 77841306
    €7.50
    inc. VAT

  • APC-Propeller 9x6 electro

    APC-Propeller 9x6 electro

    APC props are manufactured using a pultrusion process.
    This method causes the fiberglass "fibers" to be oriented axially in 1/2" long pellets, allowing for a higher fiber (60%) to resin (nylon binder) density. Providing substantially higher strength and stiffness than glass filled nylon.
    The additional stiffness is beneficial to control of vibration resonance response. The higher strength allows the use of thinner cross-sections, beneficial to weight and aerodynamic efficiency.

    Competition proven. Dark gray composite material.

    Diameter x Pitch in inches:9x6, special for electric planes.

    SKU: APC9X6E
    €4.00
    inc. VAT

     LOW STOCK
  • Cam Prop

    Cam Prop

    CAM PROP. Very high efficiency and broad effective working envelope. Range of profiles specially calculated for each propeller, ensuring best possible aerodynamics. CAM (Computer Aided Manufacturing) methods guarantee close tolerances and maximum possible accuracy. A series of propellers for models with electric or glow motors. As they are designed primarily for electric flight adaptors, all these propellers are supplied with an 8 mm centre bore. To use them with OS glow-plug motors tubular spacers are required.

    size: 14,5/4'' 36-10cm

    SKU: GR1360.36.10
    €11.20
    inc. VAT

     LOW STOCK
  • Cam Prop 12X4

    Cam Prop 12X4

    CAM PROP. Very high efficiency and broad effective working envelope. Range of profiles specially calculated for each propeller, ensuring best possible aerodynamics. CAM (Computer Aided Manufacturing) methods guarantee close tolerances and maximum possible accuracy. A series of propellers for models with electric or glow motors. As they are designed primarily for electric flight adaptors, all these propellers are supplied with an 8 mm centre bore. To use them with OS glow-plug motors tubular spacers are required.

    12X4

    SKU: GR13601
    €9.00
    inc. VAT


Manufacturers

Back