Wide Angle 700TVL Mini FPV Camera with its 1/3" CMOS sensor that has been custom tuned for FPV use. This mini camera provides excellent video quality at low illumination and can be switched between NTSC and PAL as needed.
The provided wiring harness is ready to use and simply plugs into the camera.
Sensor: 1/3" CMOS, 700TVL
Horizontal Resolution: 700TVL
Lens: 2.6mm IR coated
Field of View: 127° diagonal 160° horizontal (ideal for a fixed camera)
With the TV / AV out cable you can conveniently connect your Mobius Action Cam to your tv or any device with a standard AV input. This way you can connect your Mobius Action Cam to your tv to view your recorded material (without the need for a pc) or connect your Mobius to a wireless video transmitter. This is great for people who would like to use their Mobius for FPV (First Person View) purposes.
The Mobius Action Camera can record and give live output at the same time. This way you can FPV and recording at the same time. The TV / AV out cable also has a 5V connection. Connect the 5V connection with a power source and your Mobius never runs out of power.
4-piece Audio Video TV out cable
Output for analog Video
Output for analog Audio
Input for 5V to charge the Mobius while in use or after use.
Possible to use standard servo plugs for DIY purposes (First Person View etc)
The SP POV Case is an essential accessory for any GoPro camera and will keep your HD HERO or HD HERO2 protected during transport or storage.
Offering enough compartments for a camera, battery, memory card, two BacPacs, housing doors and all necessary leads, the SP POV Case for GoPro Cameras is the ideal solution to keeping your equipment safe.
The SP POV Case has been specifically made for GoPro cameras and boasts a compact and lightweight design.
The case features individual padded compartments that hold the components snug in place to prevent damage when being moved.
SP are renowned for creating original, high quality products and the SP POV Case for GoPro Cameras is no exception.
SP United is happy and proud to announce a new addition to the SP POV Case family. First off, lets just put it this way: It’s a big one!!!
Whilst exhibiting the same protection and features of his smaller brother, the new and enlarged POV Case, of the 'Go Pro Edition' series additionally provides space for the Suction Cup Mount as well as small tripods and telescope bars.
Truly, the best and top notch accommodation for your entire action cam equipment!! [ 32 x 22 cm ]
Please note this is for the case only the camera and accessories are NOT included
The CGO-ET is an innovative combination of a thermal imaging and a low light camera with a 3-axis gimbal, capable of a full 360°rotation. With the thermal imaging camera, the temperature in the image selectively measures and indicates relative temperature differences. The residual light-RGB camera has 20x higher sensitivity more than the human eye and absorbs excellent shots, even in low light conditions.
View in real-time
Both images are simultaneously streamed in real time, viewed on the Ground STation (ST-16). The streams may be separated and viewed as picture-in-picture or as a full-screen overlay.
The 1080 low light camera along side the thermal imaging camera combine to overlay IR and RGB for a clean, precise image.
Real World Applications
The CGO-ET is a safe way to use thermal imaging for numerous applications.
Construction and inspection
Photovoltaic systems review
Agriculture and forestry
Police and custom applications
Search and rescue operations
Only dual-image camera system available in the UAV world
Temperature measurement and display
Various color spectra allow a good visualization of heat sources
Adjustable temperature detection scale for focusing on relevant areas
Gimbal mounted IR for smoother detection display
Large RBG sensor detects better detail in the dark than the human eye, making it ideal for surveillance
Dual HD and infrared simultaneous recording
Thermal and available light recorded simultaneously, so video is frame-accurate in playback and timecode
The 3-axis anti-vibration CGO-ET thermal infrared and low light RGB camera from YUNEEC is a cost effective, safe and easy to use all-in-one solution for many applications such as construction, agriculture, forestry, fire fighting and rescue operations. While the infrared camera measures the temperature in the image and indicates relative temperature differences, the low light RGB camera has a twenty times higher light sensitivity compared to the human eye and takes excellent shots even in low light conditions. Both images are simultaneously streamed to the screen on your remote control and can be watched separately, as picture-in-picture or as an overlay.
Thermal infrared camera and 1080p low light RGB camera combinable and recordable (picture-in-picture or overlay)
Temperature measurement and readout
Selectable color spectra enhance the visualization of heat sources
Movable temperature detection scale for focussing on specific areas
DC12V 1/3 Sony 960H CCD 800 TVL 2.8mm Lens Wide Angle Camera for FPV QAV250
The latest SONY Effio-E chip solution supports OSD menu control, image crisp and clear, vivid colors, low illumination, wide voltage, micropower, wide dynamic
Camera Electronic Components does fullly spray proof water insulation paint
CCD 1/3 Sony 960H CCD sensor
Dimension 38 x 38mm
Total pixels PAL: 1020H×596V; NTSC: 1020H×508V
Effective pixels PAL: 976H×582V; NTSC 976H×494V
Signal system PAL/NTSC
Resolution 800 TVL
Digital noise reduction 3D 2DNR
OSD menu support
Minimum illumination 0.003LUX/F1.2
Video output 1.0Vp-p/75Ω
Automatic gain control adjustable 0.25/0.50/0.75/1.00, up to 55dB
DJI's Focus is a wireless follow focus that integrates natively with the Zenmuse Z5 series of camera/gimbals systems and can be mounted on rigs equipped with 15mm or 19mm rods - including the Ronin and Ronin-M gimbals. The Focus features a handheld remote controller (transmitter) with a focus knob to give to the feel of a traditional mechanical follow focus. The wireless system sports a range of up to 330' line-of-sight with a delay of only 14ms.
Control accuracy of ±0.002°
Self-contained drive unit combines brushless motor and receiver in a single module - simplifying installation and requiring only a single power source
Use with Inspire 1 Quadcopter carrying Zenmuse X5 or X5R camera
Adjustable endpoints - ideal for lenses, such as photo lenses, that lack "hard" stops
Programmable focus points and other parameters adjustable through controller menu
OLED display on controller for menu access and status display
Compatible with DJI's Ronin and Ronin-M gimbals
Works with third-party gimbals or rigs that have 15mm or 19mm rod support
Dual communication ports for future upgrades
Built-in rosette for greater mounting flexibility
When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera.
The Inspire 1 Pro Vibration Absorbing Board is made from shock-resistant magnalium which effectively absorbs vibrations.
Please refer to the DJI Tutorial video for how to mount the new vibration absorbing board.
(The Zenmuse X5 Vibration Absorbing Board is included in the Inspire 1 Pro kit. It is not included with the Zenmuse X5 kit and needs to be purchased separately.)
Short press (Apr. 1 sec or less): Change channels 1-8
Long press (More than 1.5 sec): Change bands A-B-E-F-R
Long + press (More than 3 sec): Change NTSC/PAL system
NTSC or PAL (selectable; Blue LED on= NTSC; Blue LED off=PAL)
Frequency Band A 5865 5845 5825 5805 5785 5765 5745 5725
Frequency Band B 5733 5752 5771 5790 5809 5828 5847 5866
Frequency Band E 5705 5685 5665 5645 5885 5905 5925 5945
Frequency Band F 5740 5760 5780 5800 5820 5840 5860 5880
Frequency Band R 5658 5695 5732 5769 5806 5843 5880 5917
AIO FPV camera, transmitter , atnenna all 3 functions in one limit size and weight
110 ° FOV horizontal viewing angle of 140 ° DFOV diagonal perspective 68 ° FOV vertical viewing angle
Five bands 40 channels with Raceband
Free switching between NTSC and PAL
Output power 25mW to 200mW Switchable
Nickel-plated 4 Leaf Antenna , RHCP circular polarization clover to Antirust and get strong signal
Free switching horizontal viewing and vertical direction, the camera can install on any direction
Select frequency channel by PWM
Wide voltage input 3-26V, 100mA low current operation and power consumption
Connect the booster module to support the voltage bellow 4.8V