OS Engines Spares

Products


  • OS Engines Thermo Insulator GT15HZ

    OS Engines Thermo Insulator GT15HZ

    OS Engines Thermo Insulator GT15HZ

    SKU: OS28169450
    €6.99
    inc. VAT

     72HR STOCK
  • OS Engines Thrust Washer FT160,FS91SDF,91SXH,AX,120AX,SZH

    OS Engines Thrust Washer FT160,FS91SDF,91SXH,AX,120AX,SZH

    OS Engines Thrust Washer FT160,FS91SDF,91SXH,AX,120AX,SZH

    SKU: OS46120000
    €2.99
    inc. VAT

     72HR STOCK
  • OS Piston Pin 55HZ

    OS Piston Pin 55HZ

    OS Piston Pin 55HZ

    SKU: OS25806000
    €8.90
    inc. VAT

     72HR STOCK
  • Piston Pin OS 91 SZ

    Piston Pin OS 91 SZ

    Piston Pin OS 91 SZ

    SKU: OS27006000
    €8.90
    inc. VAT

     LOW STOCK
  • Piston Pin Retainer (2pcs)

    Piston Pin Retainer (2pcs)

    O.S. Piston Pin Retainer , 2 PCS

    SKU: OS27917000
    €5.50
    inc. VAT

  • Piston Pin Retainer 40/46

    Piston Pin Retainer 40/46

    Piston Pin Retainer

    40, 46VF VR
    40,46SF
    40,46FX
    SKU: OS24817100
    €3.00
    inc. VAT

     LOW STOCK
  • Piston Ring 61SF/55HZ

    Piston Ring 61SF/55HZ

    Piston Ring 61SF/RF/Hanno II/55HZ

    SKU: OS27703400
    €25.00
    inc. VAT

     LOW STOCK
  • Piston Ring OS 46-50

    Piston Ring OS 46-50

    Piston Ring 46SF/H/46FX-H/50SX-H/50 Hyper

    SKU: OS25303400
    €35.00
    inc. VAT

     LOW STOCK
  • Piston Ring OS 91-105

    Piston Ring OS 91-105

    Piston Ring OS 91-105

    SKU: OS29503400
    €29.00
    inc. VAT

  • Piston, 91HZ

    Piston, 91HZ

    Piston, 91HZ

    SKU: OS29073200
    €79.00
    inc. VAT

  • Piston, OS 50SX,H,HG

    Piston, OS 50SX,H,HG

    Piston, OS 50SX,H,HG

    SKU: OS25203200
    €36.00
    inc. VAT

  • Piston, OS 55HZ

    Piston, OS 55HZ

    Piston, OS 50HZ

    SKU: OS25803200
    €40.00
    inc. VAT

     IN STOCK
  • Pump Unit PD-08 FS-200S-P

    Pump Unit PD-08 FS-200S-P

    Pump Unit PD-08 FS-200S-P

    SKU: OS72508100
    €89.00
    inc. VAT

     72HR STOCK
  • Upgrade SS Front bearing for Nitro Engine OS 40-50-61-91-105

    Upgrade SS Front bearing for Nitro Engine OS 40-50-61-91-105

    Upgrade Stainless Steel  Front bearing for Nitro Engine OS 40-50-61-91-105,it fits Also other models, if you not sure, please contact us.

    Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

    Those bearings are a direct upgrade to stock bearing delivered with OS engines. Bearing comes with 2 Rubber Shields/sealings. 1 should be removed in order to allow Oil to pass throw, this side is the Inner side, Outer side stays with Sealing.

    SKU: OSFRONT40-105
    €11.00
    inc. VAT

     IN STOCK
    NEW
  • Upgrade SS Front bearing for Nitro Engine yamada YS 60-120

    Upgrade SS Front bearing for Nitro Engine yamada YS 60-120

    Upgrade SS Front bearing for Nitro Engine yamada YS 60-120,it fits Also other models, if you not sure, please contact us.

    Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

    Those bearings are a direct upgrade to stock bearing delivered with YS engines. Bearing comes with 2 Rubber Shields/sealings. 1 should be removed in order to allow Oil to pass throw, this side is the Inner side, Outer side stays with Sealing.

    SKU: YSFRONT40-120
    €11.00
    inc. VAT

     IN STOCK
    NEW
  • Upgrade SS Rear bearing for Nitro Engine OS 40-55, YS50-56

    Upgrade SS Rear bearing for Nitro Engine OS 40-55, YS50-56

    Upgrade SS Rear bearing for Nitro Engine OS 40-55, YS50-56,it fits Also other models, if you not sure, please contact us.

    Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

    Those bearings are a direct upgrade to stock bearing delivered with OS/ys engines. Bearing comes with 2 Rubber Shields/sealings. BOTH should be removed in order to allow Oil to pass throw.

    SKU: OSBACK4055
    €11.00
    inc. VAT

     IN STOCK
    NEW
  • Upgrade SS Rear bearing for Nitro Engine OS61-105, YS80-120

    Upgrade SS Rear bearing for Nitro Engine OS61-105, YS80-120

    Upgrade SS Rear bearing for Nitro Engine OS61-105, YS80-120 ,it fits Also other models, if you not sure, please contact us.

    Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

    Those bearings are a direct upgrade to stock bearing delivered with OS/ys engines. Bearing comes with 2 Rubber Shields/sealings. BOTH should be removed in order to allow Oil to pass throw.

    SKU: OSBACK105
    €11.00
    inc. VAT

     IN STOCK
    NEW
  • Upgrade SS Rear bearing for Nitro Engine Webra 40-61

    Upgrade SS Rear bearing for Nitro Engine Webra 40-61

    Upgrade SS Rear bearing for Nitro Engine Webra 40-61 ,it fits Also other models, if you not sure, please contact us.

    Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

    Those bearings are a direct upgrade to stock bearing delivered with Webra engines. Bearing comes with 2 Rubber Shields/sealings. BOTH should be removed in order to allow Oil to pass throw.

    SKU: WEB4061
    €11.00
    inc. VAT

     IN STOCK
    NEW

Manufacturers

Back