New Arrivals

  • SAB Main Blades THUNDERBOLT Carbon Blades 650mm

    SAB Main Blades THUNDERBOLT Carbon Blades 650mm

    SAB Main Blades THUNDERBOLT Carbon Blades 650mm

    We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber.
    In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

    Technical data:

    • Length: 650 mm
    • Width: 58/62 mm
    • Root: 12 mm
    • Bolt Hole: 5mm
    SKU: 650TBS
    €103.90
    inc. VAT

     LOW STOCK
    NEW
  • Nylon Servo Horn ,Heavy Duty,Glassfibre ,Double 70mm Futaba

    Nylon Servo Horn ,Heavy Duty,Glassfibre ,Double 70mm Futaba

    Nylon Servo Horn - Heavy Duty - Glassfibre Reinforced - Double 70mm - 25T Futaba

    Set of 2 pcs

    SKU: GF-3101-002
    €4.90
    inc. VAT

     IN STOCK
    NEW
  • Nylon Servo Horn, Heavy Duty, Glassfibre Reinforced ,Single 35mm - 25T Futaba

    Nylon Servo Horn, Heavy Duty, Glassfibre Reinforced ,Single 35mm - 25T Futaba

    Nylon Servo Horn - Heavy Duty - Glassfibre Reinforced - Single 35mm - 25T Futaba - 2 pcs

    SKU: GF-3100-002
    €4.50
    inc. VAT

     IN STOCK
    NEW
  • Muffler Pressure Nipple - M4 - 2 pcs

    Muffler Pressure Nipple - M4 - 2 pcs

    Muffler Pressure Nipple - M4 - 2 pcs, for DIY

    SKU: GF-2010-002
    €4.99
    inc. VAT

     IN STOCK
    NEW
  • Muffler Pressure Nipple - M3 - 2 pcs

    Muffler Pressure Nipple - M3 - 2 pcs

    Muffler Pressure Nipple - M3 - 2 pcs, for DIY

    SKU: GF-2010-001
    €4.90
    inc. VAT

     IN STOCK
    NEW
  •  Motor Pinion Gear 12T

    Motor Pinion Gear 12T

    Use for T-REX 500Use for T-REX 500

    Motor pinion gear 12T x 1
    Modulus: 0.6

    SKU: H50059
    €4.99
    inc. VAT

     72HR STOCK
    NEW
  • K&S JAPAN (KSJ) - REPLACEMENT Hex shaft Joint adaptor for KSJ239

    K&S JAPAN (KSJ) - REPLACEMENT Hex shaft Joint adaptor for KSJ239

    K&S JAPAN (KSJ) - REPLACEMENT Hex shaft Joint adaptor for KSJ239

     

    SKU: KSJ2392
    €18.00
    inc. VAT

     LOW STOCK
    NEW
  • K&S JAPAN (KSJ) - REPLACEMENT HUB W/BEARINGS FOR KSJ239

    K&S JAPAN (KSJ) - REPLACEMENT HUB W/BEARINGS FOR KSJ239

    K&S JAPAN (KSJ) - REPLACEMENT HUB W/BEARINGS FOR KSJ239

     

    SKU: KSJ2391
    €23.00
    inc. VAT

     LOW STOCK
    NEW
  • K&S JAPAN (KSJ) - PLASTIC SPACER, 8MM FOR one way starter shaft KSJ239

    K&S JAPAN (KSJ) - PLASTIC SPACER, 8MM FOR one way starter shaft KSJ239

    K&S JAPAN (KSJ) - PLASTIC SPACER, 8MM FOR one way starter shaft KSJ239

     

    SKU: KSJ258
    €8.00
    inc. VAT

     LOW STOCK
    NEW
  • K&S JAPAN (KSJ)- SPINNER CUP ASSEMBLY for Airplanes

    K&S JAPAN (KSJ)- SPINNER CUP ASSEMBLY for Airplanes

    Allows your starter to be used for Airplanes as well as Helis! For use with the KSJ239 Hex Shaft kit.

    SKU: KSJ732
    €26.00
    inc. VAT

     IN STOCK
    NEW
  • K&S JAPAN (KSJ) -ROTOR BLADE COVER SACK, UNIVERSAL 30-60

    K&S JAPAN (KSJ) -ROTOR BLADE COVER SACK, UNIVERSAL 30-60

    K&S JAPAN (KSJ) -ROTOR BLADE COVER SACK, UNIVERSAL fits blades of 30-60 size

    SET OF 2.

    SKU: KSJ859
    €19.90
    inc. VAT

     IN STOCK
    NEW
  • K&S JAPAN (KSJ) - EXHAUST PLUG, 6-7MM (Small)

    K&S JAPAN (KSJ) - EXHAUST PLUG, 6-7MM (Small)

    A great item to help eliminate oil leaking from your exhaust diverter onto the carpeting of your car, home, or workshop! High quality anodized aluminum construction with steel pull ring.
    Use these exhaust plugs to prevent dripping oil and also to help seal the exhaust / engine internals from damaging corrosive moisture whilst the model is being stored.Complete with O-Ring seal and easy pull ring for quick removal.

     

    SKU: KSJ618
    €6.99
    inc. VAT

     IN STOCK
    NEW
  • K&S JAPAN (KSJ) - EXHAUST PLUG, 8-9MM (MEDIUM)

    K&S JAPAN (KSJ) - EXHAUST PLUG, 8-9MM (MEDIUM)

    A great item to help eliminate oil leaking from your exhaust diverter onto the carpeting of your car, home, or workshop! High quality anodized aluminum construction with steel pull ring.
    Use these exhaust plugs to prevent dripping oil and also to help seal the exhaust / engine internals from damaging corrosive moisture whilst the model is being stored.Complete with O-Ring seal and easy pull ring for quick removal.

     

    SKU: KSJ619
    €6.99
    inc. VAT

     IN STOCK
    NEW
  • K&S JAPAN (KSJ) 600MM FG SPORT MAIN ROTOR BLADE, 12-14MM GRIP

    K&S JAPAN (KSJ) 600MM FG SPORT MAIN ROTOR BLADE, 12-14MM GRIP

    K&S JAPAN (KSJ) 600MM FG SPORT MAIN ROTOR BLADE, 12-14MM GRIP

    SKU: KSJ2347
    €45.00
    inc. VAT

     IN STOCK
    NEW
  • K&S JAPAN (KSJ) 550MM FG SPORT MAIN ROTOR BLADE, 12-14MM GRIP

    K&S JAPAN (KSJ) 550MM FG SPORT MAIN ROTOR BLADE, 12-14MM GRIP

    K&S JAPAN (KSJ) - KSJ2137 - 550MM FG SPORT MAIN ROTOR BLADE, 12-14MM GRIP

    SKU: KSJ2137
    €39.00
    inc. VAT

     IN STOCK
    NEW
  • K&S Deluxe One Way Hex Starter Shaft w/free wheel

    K&S Deluxe One Way Hex Starter Shaft w/free wheel

    This is the Deluxe One Way Hex Starter Shaft from K & S. This hex starter extension bolts directly onto the end of your starter for starting your helicopter. Unlike other starter shaft extensions, this unit has a built in one-way bearing, which is necessary for some newer helicopters that do not have a one way bearing built into helicopter clutch assembly

    No better shaft exist on the market, made in Japan

     

    SKU: KSJ239
    €79.90
    inc. VAT

     IN STOCK
    NEW
  • Futaba T32MZ Fasstest Dual display potless radio 2.4GHz -Pre Order Now

    Futaba T32MZ Fasstest Dual display potless radio 2.4GHz -Pre Order Now

    Futaba’s new Potless flagship radio, the T32MZ, is another leap forward in performance, precision and control.

    ** NOTE - Pre-Production Information - subject to change without notice. **

    With 18 channels as standard - 16 proportional and 2 switched channels - the T32MZ can be used with up to two MPDX-1 Multiprop Decoders (sold separately) to give up to a maximum of 32 channels. When expanded this way, there are 14 proportional channels (as two are used by the Multiprop Decoders), 2 switched channels and a further 16 multiprop channels. Note that multiprop channels have lower resolution to normal proportional channels and they can’t be used in mixed functions. They are perfect for ancilliary and auxiliary functions such as lights, retracts and scale, non-flying functions.

    Main Display

    The T32MZ has a huge HVGA (640x240 pixel) full colour backlit LCD touch screen. Its anti-reflective construction means it is perfect for indoor and outdoor use.

    Sub Display

    A first for Futaba, the T32MZ has a colour sub-display at the top of the transmitter for timers and telemetry information.

    High Capacity 6600mAh LiPo battery

    A high capacity transmitter battery gives extended operation times.

    Quad Ballraced Hall Effect Stick Units

    Each stick axis is supported by dual ball bearings and uses non-contact Hall-effect sensors rather than potentiometers. The throttle stick ratchet can be adjusted to sprung self-neutral without removing the back of the transmitter, thus mode changing is simple.

    Replaceable Switches

    The 4 toggle switches can be exchanged for optional two, three or momentary switches to suit the pilot’s preference.

    Operating protocols

    Can be used on FASSTest/FASST/S-FHSS and T-FHSS protocols.

    Supplied complete with 8/18ch R7108SB receiver, 6000mAh transmitter LiPo and charger, switch harness, tool box, neck strap and transmitter case.

    SKU: P-CB32MZ-EU
    €3199.00
    inc. VAT

     PREORDER
    NEW
  • Scorpion 550/600 Class Heli HKIV-4020 1320KV Brushless motor

    Scorpion 550/600 Class Heli HKIV-4020 1320KV Brushless motor

    From 2010 when Scorpion HKIII-40 series is released, a lot of feedback by World Champions and pilots in all facets of the hobby are received that they have well established themselves as the Gold Standard of R/C model power!

    The HKIII-4035 series motors have proven themselves to be extremely successful in heli community and has become the most popular motor used in 600 ~ 700 class helicopters world-wide.

    And now we are pleased to announce the release of the fourth generation HKIV-4035 series motors. With the same motor design and materials of HKII-45 series, and single strand winding technique on this size of motor, it has the better efficiency and power conversion than HKIII-40 series, with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

    Perfect for Goblin 500

    Specifications:

    • Stator diameter: 40.0 mms
    • Stator strength: 20.0 mms
    • Stator arms: 12
    • Pole: 10
    • Bends: 3+4 Turn delta
    • Wire: 1 x 1.7 mm
    • U/min/V: 1320
    • Idling (Io): 5,74A @ 10V
    • To resistance (Rm): 0.006 Ohms
    • Maximum stress: 90 A of duration / 105 A Peak
    • Max. performance(achievement): 1998 W / 2331W Peak
    • Weight(Importance): 310g
    • Diameter: 49.5 mms
    • Wave: 4.98 mms
    • Engine length: 49,2 mms
    • Shaft length: 80 mm
    • Max. Lipo cells: 6

    Included in the Box:

    • Scorpion HKIV-4035-330KV motor
    • 3x gold contact socket
    • 3x plug cover
    • 4x M4 screw
    SKU: SP-HKIV-4020-1320
    €189.00
    inc. VAT

     72HR STOCK
    NEW
  • Scorpion 700 Class Heli HKIV-4035-330KV Brushless Motor

    Scorpion 700 Class Heli HKIV-4035-330KV Brushless Motor

    From 2010 when Scorpion HKIII-40 series is released, a lot of feedback by World Champions and pilots in all facets of the hobby are received that they have well established themselves as the Gold Standard of R/C model power!

    The HKIII-4035 series motors have proven themselves to be extremely successful in heli community and has become the most popular motor used in 600 ~ 700 class helicopters world-wide.

    And now we are pleased to announce the release of the fourth generation HKIV-4035 series motors. With the same motor design and materials of HKII-45 series, and single strand winding technique on this size of motor, it has the better efficiency and power conversion than HKIII-40 series, with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

    Specifications:

    • Stator Diameter    40 mm (1.57 in)
    • Stator Thickness    35 mm (1.024 in)
    • No. of Stator Arms    12
    • Magnet Poles    10
    • Motor Wind    7+8 Turn Delta
    • Motor Wire    1-Strand 1.5mm
    • Motor Kv    330KV RPM / Volt
    • No-Load Current (IO/10v)    2.81 Amps @ 10v
    • Motor Resistance (RM)    0.013 Ohms
    • Max Continuous Current    60 Amps
    • Max Continuous Power     80 A Peak
    • Weight    456 Grams (16.09 oz)
    • Outside Diameter    49.5 mm (1.95 in)
    • Shaft Diameter    5.98 mm (0.235 in)
    • Body Length    64 mm (2.52 in)
    • Overall Shaft Length    102.4 mm (4.03 in)

    Included in the Box:

    • 1x Scorpion HKIV-4035-330KV engine
    • 3x gold contact socket
    • 3x plug cover
    • 4x M4 screw
    SKU: SP-HKIV-4035-330
    €249.00
    inc. VAT

     72HR STOCK
    NEW
  • Jeti trim nut silver for JETI Hand transmitter DS-16

    Jeti trim nut silver for JETI Hand transmitter DS-16

    Jeti trim nut silver for JETI Hand transmitter DS-16

    Matching with the switches on the top of the JETI transmitter DC-16

    • H: 6,2mm
    • D: 9,7mm

    Contents:
    Pack of 2

    SKU: JMS-DS-NST
    €4.90
    inc. VAT

     72HR STOCK
    NEW
  • Jeti trim nut silver for JETI transmitter DC-16

    Jeti trim nut silver for JETI transmitter DC-16

    Jeti trim nut silver for JETI transmitter DC-16

    Jeti trim nut silver for JETI Hand transmitter DS-16

    Matching with the switches on the top of the JETI transmitter DC-16

    • H: 6,2mm
    • D: 9,7mm

    Contents:
    Pack of 2

    SKU: JMS-DC-NST
    €4.90
    inc. VAT

     72HR STOCK
    NEW
  • Jeti trim nut silver for JETI transmitter DS-16

    Jeti trim nut silver for JETI transmitter DS-16

    Jeti trim nut silver for JETI transmitter DS-16

    Matching with the switches on the top of the JETI transmitter tray DS-16

    • H: 6,2mm
    • D: 9,7mm

    Contents:
    Pack of 2

    SKU: JMS-DS-NSF
    €4.90
    inc. VAT

     72HR STOCK
    NEW
  • Jeti Trim nut black for JETI transmitter DC-24

    Jeti Trim nut black for JETI transmitter DC-24

    Jeti Trim nut black for JETI transmitter DC-24

    Matching with the switches on the top of the JETI transmitter tray DC-24

    • H: 4,8mm
    • D: 9,7mm

    Contents:
    Pack of 2

    SKU: JMS-DC24-NBT
    €4.90
    inc. VAT

     72HR STOCK
    NEW
  • Jeti Trim nut black for JETI transmitter DS-24

    Jeti Trim nut black for JETI transmitter DS-24

    Jeti Trim nut black for JETI transmitter DS-24

    Matching with the switches on the top of the JETI transmitter DS-24

    • H: 4,8mm
    • D: 9,7mm

    Contents:
    Pack of 2

    SKU: JMS-DS24-NBF
    €4.90
    inc. VAT

    NEW

Manufacturers