Multicopter Speed controller & BEC

Multicopter Speed controller & BEC

 Speed controllers, specially made for multicopters, programmable, with quick rate( 400+MHz)

Products


  • Power Supply UBEC 3A For FPV Multicopter

    Power Supply UBEC 3A For FPV Multicopter

    12V Power Supply UBEC Gimbal Flight Control AV Transmitter For FPV Multicopter Quadcopter

    • Specially design for multicopter
    • Metal block case with great heat dissipation, LED indicators
    • Metal shielding shell, good heat dissipation, the user can use double sided tape to stick it anywhere in the plane, you can also use screws.
    • This product ripple, high efficiency, and provide a steady output currents up to 3A for image transmission, brushless head, flight control, photographic equipment, power use.

    Technical parameters:

    • Input Voltage:  7-26V
    • Output voltage:  5.2 / 12V
    • Current:  3A
    • Weight:  9g
    • Size:  27* 17* 5mm

    Warning:

    • Battery polarity cannot be reversed.
    • Voltage cannot exceed the operating voltage range of products; this will cause damage to the product.

     

    SKU: FPV-BEC
    €12.00
    inc. VAT

     IN STOCK
  • Round ESC 2-4S 12A (w/GREEN Light)

    Round ESC 2-4S 12A (w/GREEN Light)

    Features:

    • Equipped with external oscillator and flashed with the popular SimonK program for quick response, smooth throttle, low running temperature
    • Only high quality electronic parts are used and manufactured in a good practice. The product has been proved to be highly reliable in the market
    • Can be installed under motor mount of Spedix S250 arms, does not take any precious space in the central boards, and makes wiring much easier and neat
    • Has a bright green LED light to indicate direction of a multirotor

    Specifications:

    • Input voltage: 2-4S LiPo battery
    • Continuous current:12A(Max 18A@10S)
    • Dimensions: Φ23x5.5mm (exclude capacitor)
    • Weight:13.5g
    • Firmware:SimonK
    SKU: SPX71003
    €14.90
    inc. VAT

     IN STOCK
  • Round ESC 2-4S 12A (w/RED Light)

    Round ESC 2-4S 12A (w/RED Light)

    Features:

    • Equipped with external oscillator and flashed with the popular SimonK program for quick response, smooth throttle, low running temperature
    • Only high quality electronic parts are used and manufactured in a good practice. The product has been proved to be highly reliable in the market
    • Can be installed under motor mount of Spedix S250 arms, does not take any precious space in the central boards, and makes wiring much easier and neat
    • Has a bright red LED light to indicate direction of a multirotor

    Specifications:

    • Input voltage: 2-4S LiPo battery
    • Continuous current:12A(Max 18A@10S)
    • Dimensions: Φ23x5.5mm (exclude capacitor)
    • Weight:13.5g
    • Firmware:SimonK
    SKU: SPX71002
    €14.90
    inc. VAT

     IN STOCK
  • Sky Hero ESC 40amp 2-6S Opto

    Sky Hero ESC 40amp 2-6S Opto

    Original Sky Hero 40A ESC 2-6S Lipo.

    Ideal for Spyder 6.

    SKU: SKH04-0003
    €35.00
    inc. VAT

     IN STOCK
  • SkyHero ESC 20A For Anakin

    SkyHero ESC 20A For Anakin

    SkyHero ESC 20A For Anakin

     

    SKU: SKH04-014
    €19.00
    inc. VAT

     IN STOCK
  • Slim BLHeli 40A Speed controller For mulicopters, Oneshot125 Ultra high speed

    Slim BLHeli 40A Speed controller For mulicopters, Oneshot125 Ultra high speed

    Slim BLHeli 40A Speed controller For mulicopters, Oneshot125 Ultra high speedcompatible.

    Very slim, only 17m wide, can go virtually any size of arm to fit 450+ size machines

    • Input voltage: 2-6s Lipo
    • BEC: Opto, no bec
    • Signal frequency: 20-500Hz/ Oneshot125 Ultra high speed
    • Firmware: BLHeli
    • Type:BLHeli Bootloader & Firmware
    • Size(mm)L*W*H: 17*60*7.2mm
    • Weight: 20.5g

     
    Features:
    Those are Slim series with advanced processor, the basic frequency up to 50MHz and processing capacity is faster to support high KV motor.
    Specially for Multi-copter, Fastest throttle respond
    Throttle signal is a twisted pair cable, reducing the signal crosstalk effectively .
    New miniaturization and ultra-low resistance MOSFET, powerful flow resistance, and professional MOS Drive chips to improve efficiency. PCB board processed with special thickness treatment, low resistance and calorific value, higher impact resistance.
    Support refresh rate of throttle signal maximum up to 500Hz, compatible with all flight controls; Support ultra-high speed Oneshot125 and 3000Hz high refresh rate, fast response, better throttle liner and smooth shooting to be the first choice for multicopter and racing frame.
    Throttle lever travel and other settings are available to be set by USB linker; Support two-way mode and 3D mode for racing frame.

    *Some batches can have black color HeatShrink, since its stronger when placed inside the arms, and easier to install on carbon frames due the same color.

    SKU: BL40ASLIM
    €32.00
    inc. VAT

     IN STOCK
  • USB Linker programmer for Mini/SN Series ESC

    USB Linker programmer for Mini/SN Series ESC

    The mini USB Linker is a USB programmer for the ESC  to update SimonK and BLHeli firmware.

    Works with our BLH20, HVSK40, and many others ESCs

    Weight: 8.0g
    Size:54mm*22mm*9mm
    With black plastic cover

    SKU: USBlinker
    €10.00
    inc. VAT

     IN STOCK
  • USB simple Linker programmer for Mini/SN Series ESC

    USB simple Linker programmer for Mini/SN Series ESC

    The mini USB Linker is a USB programmer for the ESC  to update SimonK and BLHeli firmware.

    Works with our BLH20, HVSK40, and many others ESCs

    Weight: 8.0g
     

    SKU: USBprog
    €8.00
    inc. VAT

     IN STOCK
  • Xrotor Pro 50A Brushless ESC Hobbywing for multicopter

    Xrotor Pro 50A Brushless ESC Hobbywing for multicopter

    Xrotor Pro 50A Brushless ESC Hobbywing for multicopter  with Special core program for multi-rotor controllers greatly improves throttle response.

    • Specially optimized software for excellent compatibility with disc-type motors.
    • All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
    • The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
    • Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
    • Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
    • MOSFET with extra-low resistance brings high performance and great current endurance.

    Specifications:

    • Cont/Peak Current 50A /75A
    • Multicopter Applicable  Over 650 Class Quadcopter
    • Input:2-6S Lipo
    • Bullet connector size:3.5 mm
    • BEC Output:NO
    • Programming item Timing (High/Intermediate), LED (On/Off), LED Color (Red/Green), Motor Rotation(CW/CCW)
    • Size :48 x 30 x 15.5mm
    • Weight 46g

     

    SKU: 924050
    €55.00
    inc. VAT

  • ZTW 6A External BEC (UBEC)

    ZTW 6A External BEC (UBEC)

    These high power external BECs manufactured by ZTW have been specifically designed for extreme aerobatics and therefore have the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and are also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

    Features:

    • Switch mode
    • Easy setup and operation
    • Battery polarity reversal protection (unit will not function if power connection is wrong)
    • Status indicator LED shows when BEC is working
    • Advanced CPU decreased the electromagnetic interference to ensure optimal performance of the RX

    Specifications:

    • Output: 5.0V/6A, 5.5V/6A, or 6.0V/6A  (changeable with jumper)
    • Input Voltage: 6V-25V (2-6s LiPo; 5-18 cell Ni-XX
    • Output Current: 6A Continuous, 10A Burst
    • Weight: 18g
    • Dimensions: 45 x 23 x 10mm

     

    SKU: UBEC6A
    €13.00
    inc. VAT

  • ZTW Spider 40A OPTO Multirotor ESC with SimonK Program

    ZTW Spider 40A OPTO Multirotor ESC with SimonK Program

    New ZTW Spider 40A OPTO Multirotor ESC with SimonK Program. ZTW Spider Series ESC's were developed specifically for multi-rotor aircraft. Flashed with  multirotor firmware and refresh rates up to 600Hz, Spider ESC's deliver incredibly linear throttle control for smooth power delivery, but do not sacrifice the smooth and crisp flight response that drone pilots demand.

    Features:

    •     Flashed with SimonK firmware
    •     Extremely low internal resistance
    •     Super smooth and accurate throttle linearity
    •     Safety thermal over-load protection
    •     Auto throttle shut down in the event of a signal loss
    •     Supports high RPM motors
    •     Power arming protection prevents the motor from running when switched ON
    •     Uses the latest generation MOSFETs to reduce heat and increase reliability

    Specifications:

    • SimonK firmware
    • Output: 40A continuous, 50A burst
    • Max Power: 630W
    • Input Voltage: 2-6s lipo
    • BEC Output: OPTO (NO BEC)
    • Dimensions: 52 x 27 x 10 mm
    • Weight: 36g
    SKU: ZTW40A
    €19.00
    inc. VAT

  • ZTW Spider 40A OPTO Slim Multirotor ESC with SimonK Program

    ZTW Spider 40A OPTO Slim Multirotor ESC with SimonK Program

    Slim size- ZTW Spider OPTO ESC are quality speed controllers and designed for simple installation and easy setup these ESCs have proven to offer excellent performance in Multi-rotor applications. If your starting out in Multi-rotors and need an easy to install solution that is tested and proven to work with Multi-rotor craft then these speed controllers have you covered. Aslo we have wide range of products in this product line.

    These ESC's features a very smooth yet linear throttle response, without sacrificing a rapid, crisp, response to any throttle input. Super fast Refresh Rate up to 600Hz make these a very smooth controller. That is to say support PWM input rates up to 600Hz for great response on your quad-copter. Fashion design and high quality with best performance.

    Description:

    • Continuous Current:40A
    • Burst Current(10s):50A
    • Battery:5-18NC/2-6 Lipo
    • Max Power:380W
    • Length:47mm
    • Width:20mm
    • Height:10mm
    • Weight:31g

    Features:

    • Flashed with SimonK firmware
    • Extremely low internal resistance
    • Super smooth and accurate throttle linearity
    • Safety thermal over-load protection
    • Auto throttle shut down in signal lose situation
    • Supports high RPM motors
    • Power arming protection (prevents the motor from accidentally running when switched ON)
    • Use new generation of the MOSFETs to make sure the ESC with low heating and more reliability.
    SKU: ZTW40ASLIM
    €19.00
    inc. VAT

     IN STOCK

Manufacturers

Back