Helicopter Mufflers

Helicopter Mufflers

All mufflers and accessories- from Zimmermann, Hatori, RJX and other finest producers

Products


  • 50 Size quiet Pipe

    50 Size quiet Pipe

    Zimmermann State of art pipe, for 50 size , Nothing Looks and works better then this pipe on the Heli.

    SKU: RCZM-2724
    €75.00
    inc. VAT

     LOW STOCK
  • Align 90 High Performance Muffler

    Align 90 High Performance Muffler

    Align 90 High Performance Muffler

    Muffler apply to 90 size helicopters, according to the strength character of 90 engine to design, features much increase the horsepower, fuel-saving, low noise, and the highest air exhaust volume on the market.
    Great design and test to three spaces: expansion chamber, accelerated section, silencer chamber, high efficiency and the quick respond of medium speed and high speed, great for 3D flying.
    Use for O.S 91SR/HZ & ALIGN 91H/HP engine.

    Specifications:

    • Size:49.1 x 318 x 81.75mm
    • Weight:225g
    SKU: HFM09001
    €95.90
    inc. VAT

     72HR STOCK
  • Bended Tube 55mm

    Bended Tube 55mm

    Stainless Steel, 0.2mm thick, Special tube for Turbine exhaust , very Lightweight - 37 gramms. This item to fit different Turbines and Scale fuselages.

     

    Diameter: 55mm : Radius 100mm/90° Material: 0,2mm Stainless steel , Weight :: 37 Gr

    SKU: SKU144B7
    €59.00
    inc. VAT

     LOW STOCK
  • Funtech 3D Muffler for YS60 sr SIDE exhaust engine

    Funtech 3D Muffler for YS60 sr SIDE exhaust engine

    Funtech 3D Muffler for YS60 sr SIDE exhaust engine

    the performance of this muffler is 20% higher compared to other mufflers

    SKU: FTB323
    €99.00
    inc. VAT

  • Funtech 3D TE Muffler for YS-120SR

    Funtech 3D TE Muffler for YS-120SR

    FT-120YS 3D muffler. Compared to 90-class, the capacity of this muffler is 20% higher.

    SKU: FT120YS3DTE
    €190.00
    inc. VAT

     LOW STOCK
  • Gas Muffler 23-29cc (RJX01-90G)

    Gas Muffler 23-29cc (RJX01-90G)

    This tuned muffler has been designed and produced exclusively with the Zenoah 23~29CC Gas Engine.
    SKU: GASMRJX
    €99.00
    inc. VAT

  • Gasser Muffler for helicopters 26-30.5cc

    Gasser Muffler for helicopters 26-30.5cc

    Gasser Muffler for Helicopters- ( for 23CC -30.5cc engine)

    SKU: RJX01-90G
    €99.00
    inc. VAT

     IN STOCK
  • Miniature Aircraft GAS Zimmermann Muffler for ZG 20 - 29 RC / PUH Engines

    Miniature Aircraft GAS Zimmermann Muffler for ZG 20 - 29 RC / PUH Engines

    4000-10 GAS Muffler for ZG 20 - 29 RC / PUH Engines

    1 x 4000-10, 2 x 0085-7, 1 x 4000-11

    Zimmermann gas muffler for Zenoah, TRM, BH Hanson gas engines. Fits RC and PUH engines from ZG 20 to 300 engines.

    Made from stainless steel. Fits Whiplash gasser, Spectra-G, 1005 gasser.
    SKU: MA4000-12
    €174.00
    inc. VAT

     LOW STOCK
  • MRCI BLACK Carbon Muffler for OS105 engine

    MRCI BLACK Carbon Muffler for OS105 engine

    MRCI BLACK Carbon Muffler for OS105 engine

    Specifications:

    • Muffler  MRCI for OS 105HZ-R Motor from 1.2 mm aluminum, with CNC connector compatible Hatori+ Power Booster , with 3 room  air and fiber silencer.
    • Steel screws , O-Ring VAITON
    • Siye : A: 270mm, B: 45 mm, C: 69mm ,D: 16mm,F:85.9mm, G:70mm, H:51mm,Y:10 mm

     

    SKU: C1318N-OS105
    €259.00
    inc. VAT

  • MRCI High Performance Exhaust Black Carbon YS120 engine

    MRCI High Performance Exhaust Black Carbon YS120 engine

    MRCI High Performance Exhaust Systems for YS  120 R/C Helicopter engines are an elegantly blended combination of dyno tested tuned performance, and unique & beautiful Italian styling. Built on a hybrid 2 piece design, the MRCI mufflers will provide excellent vibration isolation thanks to this 2 piece mounting system. Designed for all 90+ sized engines, the Diamond Exhaust system will provide incredible power output for any engine.

    Included header is compatible with YS applications and optionally an OS header can be purchased for the ability to be ran with an OS engine. The MRCI Mufflers are also compatible with Hatori 2 piece mounting headers, so you can simply unbolt a Hatori Pipe, and install the MRCI pipe in a matter of minutes!  

    Note: This muffler must be used with a pumped engine: a vent nipple or threaded inlet is not present.

    SKU: C1318N-YS120
    €259.00
    inc. VAT

  • MRCI RED Carbon Muffler for OS105 engine

    MRCI RED Carbon Muffler for OS105 engine

    MRCI Mufflers RED Carb for OS105 engine

    Specifications:

    • Muffler  MRCI for OS 105HZ-R Motor from 1.2 mm aluminum, with CNC connector compatible Hatori+ Power Booster , with 3 room  air and fiber silencer.
    • Steel screws , O-Ring VAITON
    • Siye : A: 270mm, B: 45 mm, C: 69mm ,D: 16mm,F:85.9mm, G:70mm, H:51mm,Y:10 mm

     

    SKU: 1318R-OS105
    €259.00
    inc. VAT

  • MRCI SILVER Carbon muffler for OS105 engine

    MRCI SILVER Carbon muffler for OS105 engine

    MRCI SILVER Carbon muffler for OS105 engine

    Specifications:

    • Muffler  MRCI for all Motor from 1.2 mm aluminum, with CNC connector compatible Hatori+ Power Booster , with 3 room  air and fiber silencer.
    • Steel screws , O-Ring VAITON
    • Siye : A: 270mm, B: 45 mm, C: 69mm ,D: 16mm,F:85.9mm, G:70mm, H:51mm,Y:10 mm

     

     

    SKU: C1318S-OS105
    €199.00
    inc. VAT

  • MRCI SILVER Carbon muffler for YS96/120 engine

    MRCI SILVER Carbon muffler for YS96/120 engine

    MRCI SILVER Carbon muffler for YS96/ 120SRX engine

    Specifications:

    • Muffler  MRCI for all Motor from 1.2 mm aluminum, with CNC connector compatible Hatori+ Power Booster , with 3 room  air and fiber silencer.
    • Steel screws , O-Ring VAITON
    • Size : A: 270mm, B: 45 mm, C: 69mm ,D: 16mm,F:85.9mm, G:70mm, H:51mm,Y:10 mm

     

     

    SKU: C1318S-YS120
    €199.00
    inc. VAT

     LOW STOCK
  • Muffler, 3MM 53TOC

    Muffler, 3MM 53TOC

    Aluminium Polished Muffler for 3MM 53TOC engine.

    SKU: SKU20591
    €49.90
    inc. VAT

     IN STOCK
  • OS 105HZ Power Boost

    OS 105HZ Power Boost

    A tuned silencer system designed especially for the 105HZ series of engines
    SKU: OS72146000
    €244.00
    inc. VAT

     72HR STOCK
  • OS GT15HZ PowerBoost Pipe

    OS GT15HZ PowerBoost Pipe

    A tuned silencer system designed especially for the GT15HZ Petrol Engine
    SKU: OS72148000
    €234.00
    inc. VAT

     72HR STOCK
  • OS Max 105HZ-R with MRCI Pipe Combo

    OS Max 105HZ-R with MRCI Pipe Combo

    OS Max 105HZ-R with MRCI Pipe Combo (Silver or carbon- as stock allows)

    With Demand Regulator System, Cylinder capacity: 17,17 cm³ Output Power: 3,8 HP @ 15000 RPM Ideal power drive for 700 size Helicopter O.S. ENGINE

    These are the engines that precision aerobatic and 3D heli pilots have been waiting for! In order for 90-sized machines to nail huge maneuvers and hardcore, smackdown-style 3D it's all about power, and both the 105HZ and 105HZ-R have it in abundance. Displacement has been increased by 15%, while a huge venturi rams air into the carburetor, producing massive power. Plus, they fit in a .90-sized mounting pattern.

    Featuring the displacement of a 1.05 in the mounting space of a .90.
    More displacement means more power, and these engines boost displacement by 15%!
    A huge venturi boosts output even further.
    The machined, blue anodized heatsink head is light in weight, and cools the engine efficiently.
    An extra feature on the 105HZ-R is the DRS (Demand Regulator System), which ensures consistent fuel flow regardless of the heli's attitude.

    Specifications:

    • Displacement: 1.048 cu in (17.17 cc)
    • Bore: 1.442 in (29 mm)
    • Stroke: 1.024 in (26 mm)
    • Practical rpm: 2,000-16,500
    • Output: 3.8 hp @ 15,000 rpm
    • Weight: 21.03 oz (596 g)

    Muffler color- Silver or carbon- as stock allows

    SKU: OS18752
    €645.00
    inc. VAT

  • OS Max 105HZ-R with Powerboost Pipe Combo

    OS Max 105HZ-R with Powerboost Pipe Combo

    OS Max 105HZ-R with Powerboost Pipe Combo

    With Demand Regulator System, Cylinder capacity: 17,17 cm³ Output Power: 3,8 HP @ 15000 RPM Ideal power drive for 700 size Helicopter O.S. ENGINE # OSMG1961 / OSMG2884

    These are the engines that precision aerobatic and 3D heli pilots have been waiting for! In order for 90-sized machines to nail huge maneuvers and hardcore, smackdown-style 3D it's all about power, and both the 105HZ and 105HZ-R have it in abundance. Displacement has been increased by 15%, while a huge venturi rams air into the carburetor, producing massive power. Plus, they fit in a .90-sized mounting pattern.

    Featuring the displacement of a 1.05 in the mounting space of a .90.
    More displacement means more power, and these engines boost displacement by 15%!
    A huge venturi boosts output even further.
    The machined, blue anodized heatsink head is light in weight, and cools the engine efficiently.
    An extra feature on the 105HZ-R is the DRS (Demand Regulator System), which ensures consistent fuel flow regardless of the heli's attitude.

    Specifications:

    • Displacement: 1.048 cu in (17.17 cc)
    • Bore: 1.442 in (29 mm)
    • Stroke: 1.024 in (26 mm)
    • Practical rpm: 2,000-16,500
    • Output: 3.8 hp @ 15,000 rpm
    • Weight: 21.03 oz (596 g)
    SKU: OS18751
    €635.00
    inc. VAT

     LOW STOCK
  • Raptor High Performance Muffler (46~50)

    Raptor High Performance Muffler (46~50)

    Raptor High Performance Muffler (46~50)

    SKU: PV0109
    €75.00
    inc. VAT

     LOW STOCK
  • Yamada Power Pipe 96 for YS 96SRX/91SRX

    Yamada Power Pipe 96 for YS 96SRX/91SRX

    Yamada Power Pipe 96 for YS 96SRX/91SRX

    Specifications:

    • Length: 235mm
    • Weight: 230g
    SKU: YSPP96
    €194.00
    inc. VAT

     72HR STOCK
  • Z2691 91 size Muffler Helicopters

    Z2691 91 size Muffler Helicopters

    Stainless-Steel Silencer 2691L left
    For model helicopter motors of the .91 (15 cc) size.

    for engines: OS 0.91, Yamada, Webra P5, Irvine , Magnum, SC, TT

    This compact silencer is designed for use even with low nitro fuel.

    These tuned pipes are manufactured from high-quality stainless steel.
    This is a high-performance silencer with simple handling, designed for everyday use, and with a very broad speed range.
    Overheating engines are a common problem, but the silencer’s careful matching to the .91 motor size makes this a thing of the past - provided that the carburetor is set correctly.

    All this comes with excellent power output.

    The silencer is attached directly to the engine’s exhaust stub, without modification.

    Engine size: 0.91cu. in. (15 cc)
    Weight: Approx. 225 g
    Engine exhaust flange: OS, Yamada, Webra P5, Magnum, Irvine, SC, TT
    Diameter: 40 mm
    Application: Helicopter

    SKU: RCZM-2691L
    €99.00 €119.00
    inc. VAT


Manufacturers

Back