MSH Protos Max V2 Kit Classic including Brain Flybarless Unit Black & Red

MSH Protos Max V2 Kit Classic including Brain Flybarless Unit Black & Red

The Max V2 was born from a passionate group of engineers and pilots trying to make a machine that's really something special.  They wanted something that could easily fly several hundred hard flights with nearly zero maintenance.  Something that looked stunning, but had a focused purpose for every element in the design. They wanted to create something that you can't wait for to fly everyday. Without inhibition. The Protos Max V2 is a stunning feat of engineering at an incredible value.

Specifications     
Frame     Support frame made in 2.5mm carbon fiber and aluminum.
Bottom frame made in one-piece high quality thermoplastic material
System transmission     Twin belt drive system.  Motor belt is 15mm wide gates.  Tail belt is 6mm gates
Usable main blades     700mm -726mm (stock boom)
750mm-800mm (with 800 conversion kit)
Battery Options     LiPo from 10s to 14s 4000/5500mAh
Battery compartment dimensions     70mmx60mmx360mm
Suggested battery     Lipo 12s 5000mAh
Main rotor diameter     1577mm (with 700mm blades)
1777mm (with 800mm blades)
Tail rotor diameter     306mm (with 115mm tail blades)
Total length without blades     1372mm
Total length with blades     1758mm (with 700mm blades)
1858mm (with 800mm blades)
Main shaft diameter     12mm hollow
Tail shaft diameter     6mm
Height     365mm
Swashplate servos     3x standard servos
(to use the precision clutch style servo horns provided inside the kit it is necessary that servo shaft is compatible with Futaba, MKS or Savox)
JR compatible servo hubs available as an upgrade part
Tail servo     1x standard servo
Maximum dimension of main blade root     14mm M5 screw
Maximum dimension of tail blade root     5mm M3 screw
Teeth pinion     20T included (18T, 19T, 21T, 22T optional).  Supports 6mm and 8mm motor shafts.
Main pulley teeth     190T
Tail ratio     4.8:1
Tail boom diameter     27mm
Spindle diameter     10mm

      Needed for assembly:

•     3 full size swash servos, 1 full size tail servo
•     Main rotor blades (690 - 716mm)
•     Tail blades (105 - 115mm.  115mm preferred for aggressive flight or low headspeeds)
•     Transmitter/Receiver
•     700 class Motor (480-540kV 12s), 14s optional. Supports both 6mm and 8mm shaft diameter
•     12s LiPo (5000mah typical). 14s LiPo (4400mah typical)
•     BEC (preferred). Or RX LiPo.
•     ESC (120A - 200A, 12s to 14s.  Depending on the power system chosen and flight style)