Monitors & Goggles

AG-300 Align FPV Goggle

Display:

• Resolution: 854x480 (WVGA)
• Lightness: Adjustable
• Contrast: Adjustable
• Saturation: Adjustable
• View Angle: 30°（horizontal）

Receiver:

• Antenna Port: RP-SMA
• Frequency: 5.8G Dual diversity input
• 32channel can be chosen
• Auto switch to the best signal channel
• Auto Search: Yes

AG300 Recording:

• Video: 640x320 (30FPS)
• Storage: Micro SD Card (up to 32G)
• Power: DC 5V/1A
• Power Consumption: 950mA @ 5V (Maximum)
• Working Environment: -10°C ~ +65°C

Specification:

• Input Voltage: DC 5V/1A
• Size: 172x88x60mm
• Weight(Kit only): Approx. 142g

Content:

• AG300 FPV Goggle x 1
• 5.8G Circular Polarized Antenna x 2
• FPV Goggle mini USB Wire x 1(900mm)
• FPV Goggle Bag x 1

Optional Equipment:

• AV in/out Cable
• Power Bank

The new Boscam FPV Goggles are flat out the most advance and feature rich FPV goggles on the market.
Boscam has designed their new goggles from the ground up for FPV, so no compromises were made. The High resolution widescreen matched with a 30 degree field of view puts you in the cockpit, blend that with the state of the art auto centering head-tracker and you have a true immersion like you have never seen.
Boscam has matched there beautiful FPV view with reliability and adjustability, from the built in 32 channel dual diversity 5.8GHz receiver too the IPD and Diopter adjustments. The goggles have full A/V in’s and out’s for DVR’s or monitors or heck even watch a movie with them, but with a quick push of a button your view switches to the front built in camera allowing you to perform all kinds of tasks without the need to lift the goggles. The Goggles also feature light tight comfortable eyecups and an earphone jack with volume control.
The quality and feature Of the new Boscam FPV Goggles have definitely raised the bar, so If you’re ready for some seat of your pants barnstorming type of flying from the cockpit view..  

Features:

•  Built-in 32CH 5.8G Diversity that is compatible with most FPV 5.8G transmitters on the market(Fatshark,DJI,Walkra,Boscam etc)
•  Built-in self-calibrating  dual axis head tracking (gyro, inertial and compass)
•  Built in Dual 854X480(WVGA) Monitors,  1,229,760 color sub-pixels
•  Built-in external camera for surrounding view (640X480)
•  AV in/ AV out/ Earphone socket (with volume control)
•  Adjustable Interpupillary and Diopter for your eyes
•  Adjustable brightness and contrast

Specs:

• FOV: 30 degrees
• Resolution: 854x480 (WVGA) 1230k
• Interpupillary (IPD) distance: 60-68mm adjustable, Diopter with optional lenses
• Channels: 32CH 4band 5.8GHz
• Receiver: Dual ISM 32ch Diversity receiver -90dbm Sensitivity
• Video format: NTSC/PAL
• Antenna connector: 2x SMA 50ohm
• Video in/out: 1.0VP/75ohm
• Audio in/out: 1.0VP/10kohm
• Front internal camera: 120 degree 640x480
• head tracker: Compass/ Inertial and gyro ppm selectable channel output
• A/V port: 3.5mm
• Ear Out: 3.5mm with volume control
• power Supply: dc7-28v / 1A
• Power consumption: 4.3w
• Channels of reception : A,B, C,D

OTG cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device.

Cable avaliable in following configuration: choose your model

• USB-C to USB-C
• USB-C to Apple (Lighning)
• USB-C to Micro USB

For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your  mount.

You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:

•     DJI Mavic Pro
•     DJI Mavic Pro Platinum
•     DJI Phantom 3
•     DJI Phantom 4 / Pro / Pro V2
•     Inspire 1
•     Inspire 2
•     Matrice 210
•     Matrice 600
•     Mini
•     Spark

Also Other models which fit the connector and OTG

Cable length: 35cm (coiled), total length max 60cm

Set of 1 cable

Eachine EV800 5 Inches 800x480 FPV Goggles 5.8G 40CH Raceband Auto-Searching Build In Battery

Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod
HD high brightness 5inch LCD specially tuned for FPV racing
Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand  
Come with advanced auto-searching function ad show you the working frequency on screen
Built-in 3.7V/2000mAh battery, each full charge revive around 3.5hours working time
Wide range re-charge voltage 5-12V, power banks or 2S/3S batteries can be used as back-up power sour, to prolong the working time
Ergonomic design fit your faces
Super-wide visible angle up to 82 degree
92% transparent lens adopted, no distort, no blur on the adage of screen
Light weight 375g with 3.5hr 2000mAh battery, RTF for any scale racing game
5 inch 800*480px HD high brightness LCD

Screen specification:

• Screen size: 5.0 inch
• Screen resolution: 800*480 (No blur after enlarge by the lens)
• Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
• View Angle: 140/120 degree(Horizontal/Vertical)

Lens specification:

• 3x boost of the video to acquire intense feel-in-there video
• 92% transparent rate no distort of light

Battery specification:

• Built-in 3.7V/2000mAh battery;
• Each battery circle offer around 3.5hr working time
• 5-12V wide recharging voltage range, typical recharging voltage is 5V
• Accepts 5V power banks or 2S(7.4V)/3S(11.1V) battery as back-up power to have long working time

Size & weight:

• Dimension: 180x145x82mm
• Weight: 349g with 3.5hr 2000mAh battery
• Belt: three-ways adjustable belt

Package Included:

• 1 X EV800 FPV VR Goggles (Built-in 3.7V/2000mAh battery)
• 1 X Antenna
• 1 X USB charger cable
• 1 X Battery charger cable
• 1 X AV IN cable
• 1 X User Manual
• 1 X Clean cloth
• 1 X Bag

Frequency Table:

Frequency Band A     5865     5845     5825     5805     5785     5765     5745     5725
Frequency Band B     5733     5752     5771     5790     5809     5828     5847     5866
Frequency Band E     5705     5685     5665     5645     5885     5905     5925     5945
Frequency Band F     5740     5760     5780     5800     5820     5840     5860     5880
Frequency Band R     5658     5695     5732     5769     5806     5843     5880     5917

The Fat Shark 5.8GHz 5G8RX 32ch Race Band Receiver Module provides 32 channels on the 5Ghz band. Fully race ready, this module is plug and play with FatShark Dominator goggles. Two dip switches on the front of the module allow you to select one of 4 bands, then you can select any of the 8 channels on your headset.

Installs directly into the Dominator goggle set to instantly give you 5.8ghz Raceband to go with your Vortex. Instantly add those channels you're missing in your Dominators that also suit all the Boscam A and E frequencies so now you can cover all the missing bands and channels with your goggles. Plug and play with Dominator goggles and opens access to that Raceband in the ImmersionRC Vortex. Based on the NexWaves RF NWM662JRX. Factory tested to -90dBm

Channels Supported:
DIP Switch     Band     Name     CH1     CH2     CH3     CH4     CH5     CH6     CH7     CH8
0-0     1     Fat Shark /IRC     5740     5760     5780     5800     5820     5840     5860     5880
0-1     2     Boscam E     5705     5685     5665     5645     5885     5905     5925     5945
1-0     3     Boscam A     5865     5845     5825     5805     5785     5765     5745     5725
1-1     4     RaceBand     5658     5695     5732     5769     5806     5843     5880     5917

Fatshark Dominator 5G8 NexwaveRF RX Module - Alpha Bands

Dominator Modules The Dominator modules are compatible with both the current Dominator model and the new DominatorHD. The modules allow the headset functions to be tailored to specific FPV requirements or allow upgrading as needs are indentified. The following modules exist or are soon to be released: - Trinity Head Tracker.

Compatible with Airwave Systemes (FatShark, ImmersionRC, usw.).

Frequenzies:
5740, 5760, 5780, 5800, 5820, 5840, 5860MHz

FatShark SCOUT FPV Goggle

The Scout is the newest Fat Shark product.
It is the culmination of years of work to design a high-performance google at an entry level price.
The Scout uses a patented panel goggle optical module to deliver a 50 degree field of view (FOV), 1136 x 640 resolution and a 60 fps refresh rate in a comfortable to wear headset.
In addition to an impressive display, the Scout has completely overhauled electronics performance.
It has a diversity RX with an embedded 10 dB patch antenna to maximize reception, a new OSD, an updated DVR, and simple USB charging.
The Scout also has several user conveniences including an embedded fan, removable foam to allow for pilots to wear glasses while flying and an LED indicator on the antenna to provide channel notification.
The Scout is the headset for aspiring pilots looking for premium performance at a great value.

Optics:

• FOV (field of view): 50 degrees diagonal
• Type: Plastic optics

Display:

• 4.0 inch
• Resolution 1136 X 640
• NTCS/PAL auto selecting

Audio:

• Stereo

User Controls:

• Channel Selection
• Band Selection
• Display Control
• Volume Control
• Beep Control
• RX set
• Fan Control
• Clock set
• Mode Selection (RX/AV/AUX)
• DVR Control

Electrical:

• Power Supply: Standard 18650 Li-ion battery
• RF Modules: Infinite channel support on multiple bands

Analog DVR:

• MicroSD support to 64 GB
• Record Rate: 6Mbps (MJPG compression, 60 fps, MOV)
• File playback (native recording, no codec support)
• Upgradeable via SD card

Battery:

• 3.7V, 2600mAh (18650 cell)

Interface:

• 3.5mm AV in port
• 3.5mm 3p earphone port
• MicroSD
• USB-C
• AUX port

Mechanical:

• Ergonomic molded headset w/ adjustable headband

Dimensions:

• 170 x 120 x 95 mm

Weight:

• 336.5 g

FPV Carbon tray Tablet holder adaptor for carbon trays

Stable FPV extension for transmitter trays in modern carbon design.
The FPV expansion is well suited for the video flight with Coptern, airplanes or helicopters.

For rear mounting of the monitor.
for foot mounting or side mounting requires one additional parts.

Compatible with our tablet holder.

Material: Carbon black GF3

• Weight about 200 g
• FPV without transmitter tray, without transmitter, without monitor, without accessories & without rubber hand rest pads.

Great googles to use, FPV Hunter 5.8G 40CH 5" 800*600 HD FPV Gogges Video Glasses with Antenna

Resolution:800*480
Receiver:40CH
Monitor:16:9
Working Voltage:7V-15V(2s-4s)
Operating temp:-20℃-80℃
Power consumption:300mah
Video format:NTSC/PAL auto identify

FrSky HORUS X10 black GFK fiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 305 x 160 x 145 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)

FrSky Taranis X9D in Black GFK fiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 305 x 160 x 145 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)