CHECK OUR ON-SALE SECTION!
+32-486-808080 Contact Us
Cart

Modulus 0.5

Modulus 0.5

Please find below Pinions with Modulus 0.5

Products

  • Motor Pinion Gear 13T

    Motor Pinion Gear 13T

    Motor pinion gear 13T
    M3 Set screw x 1( M3x3mm)
    Module:0.5
    Shaft diameter :Φ 3.5mm

    SKU: H45059
    €5.50
    inc. VAT

    OUT OF STOCK NOTIFY
  • Motor Pinion Gear 14T

    Motor Pinion Gear 14T

    Motor pinion gear 14T
    M3 Set screw x 1( M3x3mm)
    Module:0.5
    Shaft diameter :Φ 3.5mm

    SKU: H45060
    €5.50
    inc. VAT

     LOW STOCK
  • Motor Pinion Gear 15T

    Motor Pinion Gear 15T

    Motor pinion gear 15T
    M3 Set screw x 1( M3x3mm)
    Module:0.5
    Shaft diameter :Φ 3.5mm

    SKU: H45137
    €5.50
    inc. VAT

     IN STOCK
  • Pinion 12-20T, M0.5 5mm

    Pinion 12-20T, M0.5 5mm

    Not all Pinions are Created Equal !

    Crown Gear Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown Gear Pinions are produced in Europe!

    Details: Pinion Modul 0.5 , Diameter of 5 MM.
    Choice of T : 12-20

    SKU: CROWN0.515205mm1
    €5.00
    inc. VAT

     IN STOCK
  • Pinion 14 teeth 5mm

    Pinion 14 teeth 5mm

    Pinion 14 teeth  diam 5mm, module 0,5 LOGO 10

    SKU: MIK-2814
    €9.50
    inc. VAT

     72HR STOCK
  • Pinion 15 teeth 5mm

    Pinion 15 teeth 5mm

    Pinion 15 teeth D5mm, module 0,5 LOGO 10

    SKU: MIK-2815
    €9.50
    inc. VAT

     72HR STOCK
  • Pinion 16 teeth dia.5mm, module 0,5

    Pinion 16 teeth dia.5mm, module 0,5

    Pinion 16 teeth dia.5mm, module 0,5 . LOGO 10/400

    SKU: MIK-2816
    €9.50
    inc. VAT

     72HR STOCK
  • Pinion 17 teeth dia.5mm, module 0,5

    Pinion 17 teeth dia.5mm, module 0,5

    Pinion 17 teeth dia 5mm, module 0,5 LOGO 10/400

    SKU: MIK-2817
    €9.50
    inc. VAT

     LOW STOCK
  • Pinion 19 teeth dia.5mm, module 0,5

    Pinion 19 teeth dia.5mm, module 0,5

    Pinion 19 teeth dia.5mm, module 0,5 

    For LOGo 10, 400

    SKU: MIK-2819
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 20 teeth D5mm, module 0,5

    Pinion 20 teeth D5mm, module 0,5

    Pinion 20 teeth D5mm, module 0,5

    SKU: Mik-2820
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 21 teeth Ø5mm MOD 0.5

    Pinion 21 teeth Ø5mm MOD 0.5

    Pinion 21 teeth Ø5mm, module 0,5

     

    SKU: MIK-2821
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 22 teeth Ø5mm

    Pinion 22 teeth Ø5mm

    Pinion 22 teeth Ø5mm, module 0,5 LOGO 10

    SKU: MIK-2822
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 26 teeth 5mm M0,5

    Pinion 26 teeth 5mm M0,5

    Pinion 26 teeth D5mm, M0,5

    SKU: MIK-2826
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 27 teeth Ø5mm,

    Pinion 27 teeth Ø5mm,

    Pinion 27 teeth Ø5mm, module 0,5 LOGO 10

    SKU: MIK-2827
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 28 teeth dia. 5mm, module 0,5

    Pinion 28 teeth dia. 5mm, module 0,5

    Pinion 28 teeth dia. 5mm, module 0,5 LOGO 10

    SKU: MIK-2828
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 29 teeth Ø5mm,

    Pinion 29 teeth Ø5mm,

    Pinion 29 teeth Ø5mm, module 0,5 LOGO 10

    SKU: MIK-2829
    €12.50
    inc. VAT

     72HR STOCK
  • Pinion 30 teeth Ø5mm

    Pinion 30 teeth Ø5mm

    Pinion 30 teeth Ø5mm, module 0,5 LOGO 10

    SKU: MIK-2831
    €12.50
    inc. VAT

     72HR STOCK
  • Pinions 10-16T M0.5 3.2m

    Pinions 10-16T M0.5 3.2m

    Crown Gear pinions, made from best allow steel to meet hard conditions as used in 3D flying.

    Hardened pinion, fits shaft of 3.17-3.2mm

    Pinion is 13mm long

    Crown gear products produced and hardened in Europe

    Available From 10-16T

    SKU: CrownM0.51
    €5.00
    inc. VAT

     IN STOCK
  • Pinions 9-15T M0.5 3.5mm

    Pinions 9-15T M0.5 3.5mm

    Crown Gear pinions, made from best allow steel to meet hard conditions as used in 3D flying.

    Hardened pinion, fits shaft of 3.5 mm, fits new motors 450 with shaft diameter of 3.5mm

    Pinion is 13mm long

    Crown gear products produced and hardened in Europe

    Available in 9 to 15T( CHOICE)

    SKU: CrownM0.581
    €5.00
    inc. VAT

     IN STOCK

Manufacturers

Back

Drones

Special SALE Drones & Multicopters FPV Racing Kits & Combos Multicopter Spares & Canopies Multicopter Electronics Multicopter Tuning & Upgrades Multicopter Camera & Video Multicopter Propellers Custom building Services

Helicopters

Helicopter Kits & Combos Helicopter Spare Parts Helicopter upgrades Helicopter Rotor Blades Helicopter Motor & ESC Helicopter Pinions Flybarless & Gyros Nitro-Fuel Engines & Mufflers Canopy, Fuselage & Carbon parts

Electronics

Lipo Packs & Batteries Radios & Servos Chargers & Connectors Electric Wheels-Scooters

Other Stuff

Tools & Screws Ball Bearings Books & Simulators Glasses & Cool stuff Radio Controlled Cars General RC Accessories Radio Controlled Airplanes

Bestsellers

Pinion 17 teeth dia.5mm, module 0,5
Pinion 17 teeth dia.5mm, module 0,5
€9.50
Pinion 12-20T, M0.5 5mm
Pinion 12-20T, M0.5 5mm
€5.00
Pinions 9-15T M0.5 3.5mm
Pinions 9-15T M0.5 3.5mm
€5.00
Competitive prices, reward
program & secure payments

Same day dispatch, choice
of couriers, worldwide delivery

Top customer service
& support by engineers

+10K articles in stock
Real-time stock levels


WHY eRCMARKET?

INFORMATION

POLICIES

TESTIMONIALS

Meilleur RC Shop d'Europe. Super équipe.

Erwan Van Haaster

Super company. Extreme fast service!! Thanks a lot.

Ben

Hi, I am from India and placed an order with no tracking option.. The parcel was not coming to...

Mr. RATNARAJ KANUNGOE

Alex se coupe en quatre pour vous aider ..... Super Pro ,Super stock ,Super sympa ,à recommander...

luc vancaster
privé

Top magasin, toujours dispo pour un conseil ou une aide, réponse rapide aux mails, stock toujours...

Olivier N.

Submit a Testimonial More...

Copyright © 2000-2019 eRCMarket. All Rights Reserved.