Miniature Aircraft Whiplash Turbine II with TS 45iH and Blades - Kit version

Manufacturer: Miniature Aircraft
Manufacturer Miniature Aircraft
Our Price

6492.00

Inc. VAT

Seen it cheaper?

Availability
72H Stock
Ships in 2-4 Days
SKU MA1035-1
Quantity

Purchase this product now and earn 6492 Points!



Description
Miniature Aircraft  Whiplash-Turbine II with TS 45iH and Blades - Kit version. Please note: delivery time is 3-4 weeks Included in the kit
  •     Whiplash helicopter kit
  •     TS45i heli turbine engine, Whiplash special edition
  •     MS Composite special gasser / turbine main blades 710mm (exclusively made for MA)
  •     MS Composite 106mm tail blades
Other equipment needed and not included:
  • Servos: 3x cyclic, 1x tail
  • FBL system which can handle the supersonics emitted by the turbine engine (Axon, CGY760R and others)
  • Governor, we highly recommend to use an external governor to control the head speed.use defects at the turbine engine
  • 2x 2S LiPo / LiFe batteries like 2S3500-4000 RX
  • 2x battery switch
  • Receiver
  • Telemetry module for the turbine engine (optional)
Chassis: Sturdy graphite main frame unit. All C/F parts are made from high quality 100% carbon. Main frame designed for maximum protection of the turbine engine CNC machined Delrin 117 tooth helical main gear High quality one way bearing made in Germany High quality one way bearing hub, full ball bearing, made from stainless steel, hardened and ground Heavy duty, high quality front tail drive gears made in Germany High precise two-piece clutch bell with double ball bearing support Standard gear ratio for 710 to 720mm main blades, typ. head speed 1650 to 2000 rpm Optional gear ratios for 690 or 800mm blades True 6061-T6 CNC machined aluminum components CNC machined aluminum triple main shaft bearing blocks Direct controlled 120 (degree) CCPM CNC machined aluminum boom clamps CNC machined aluminum turbine engine mount CNC machined additional tubine engine front support Balanced fan and hub assembly Presinstalled magnets for governor Full ball bearings throughout High quality landing gear struts Large fuel tank for typical 5 to 7 minutes of flying time Prepared for optional twin tank system for longer flying time Additional header tank for bubble-free fuel supply of turbine (included) Rotor Head: Full ball bearings Heavy duty linkages 9mm head axle made from special high quality steel CNC machined aluminum swashplate CNC machined main rotor grips CNC machined main rotor head High quality swashplate heim ball/ball bearing High precise swash plate follower arms with 4 ball bearings each Tail Rotor: Full ball/thrust bearings Tail Rotor hub made from special high quality steel Graphite tail fin CNC aluminum “open” gearbox CNC machined tail gears made from aluminum with hard anodizing surface and POM Aluminum 22mm tail boom Positive control system Hardened tail rotor output shaft High precise tail slider Carbon/Aluminum boom supports Turbine engine: Whiplash Special Edition two shaft kero-start turbine for R/C helicopters made by Turbine Solutions. Two shaft kero-start engine Gearbox output shaft rpm range: 4,000 to 15,000 rpm Max Power Output: 6.8 HP / 5Kw @ 190,000 rpm Max Torgue: 4Nm / 2.9 ft Lbs @ 13,500 rpm Fuel consumption: 176ml/Min / 5.8oz/Min Canopy: High Visibility Painted Epoxy-Glass Canopy Blades: MS Rapid 710 Gasser & Turbine Main Blades MS 106 Tail Blades

Need Some Advice?

Complete the form below and we'll get back to you...


We'll never share your email with anyone else.

Seen it cheaper than €6492.00 ?

Complete the form below and we may be able to match, or even beat the price...


We'll never share your email with anyone else.
Must be a valid URL to the competitor's product page that displays the price
 
Terms & Conditions

Please do not send any messages trying to compare prices with unknown shops. We will only match with official shops located in Europe.

A store that has no physical shop, no showroom, no phsysical contact info, no return policy, including 'home garage shops' are NOT considered as an official store.

We are working hard to bring you low prices. But selling a product without warranty (aftersales service) is not our vision. Sometimes our support and advice is worth more important then the product itself.

To receive a price match, please read the conditions and make sure you qualify for a price match and then submit a request using the price match form on the product page.

Conditions:

  • Price matches are honored on identical items only. Same brand, same tech specs, same warranty conditions. *
  • The item must be brand new and in stock. Please make sure the company you want to match has the product IN STOCK!
  • We only price match with official stores within the EU and the products have to come from official importer/producer in Europe.
  • The competitor must be a physical and authorized dealer of the item you wish to purchase.
  • Special sales or events cant be covered with price match policy.
  • If you happen to find a lower price (please check shipping costs!) on an identical item, just show us the price (including delivery costs).

* Some products within EU have different sockets, example UK chargers which do not fit in Europe.

How to Apply:

Simply fill a price match request online at the time of order by including the competitor's URL for the item in the comments section of your order form.

This is an individual response, We will acknowledge your request within 24-48h and provide instructions for next steps.

Please note this is a manual process and you will not be able to physically adjust the price on your on-line order.

If you need a more immediate response, please call +32 486 808080.

Remarks:

Our price match does not apply to competitor's bonus offers, free offers, auction websites, non-retail (wholesale) websites, private sales, special orders, typographical errors, clearance sales, liquidation sales, mail-in rebate offers, or where a service commitment is included in the transaction.

Internet competitor offers must include shipping and handling charges as the basis for comparison.

Certain UK products are not covered by European warranty. Check with us for compatibility issues.

Price matching is subject to providing proof of the manufacturer's part number and availability of the product. (i.e. current dated advertisement, register receipt, copy of webpage or catalog page) of a lower price.

Please consider the price matching as an action of good will, we reserve the right to refuse any request.

These terms and conditions may change at any time without notice.

Related Products