Mikado

Mikado
Mikado is a producer of Famous Logo helicopters, made in Germany

Products


  • V-bar Control Panel

    V-bar Control Panel

    The days of carrying an expensive laptop to the flying field are over, the new V-Bar Control Panel is the easiest and most practical way of programming the V-Bar. The V-Bar Control Panel is connected directly to the V-Bar via cable and allows you to program the V-Bar with necessary data such as initial set-up and parameter adjustment right at the flying field. The panel features an ergonomically correct turning knob and push button which have been integrated for easy operation, an SD card for loading model data or updating set-up software, and a high-contrast display which is readable even in bright sunlight. The SD card can also be used to transfer model data to another pilot’s helicopter.
     

    •   Easy-to-use set-up software
    •   High-contrast graphics display
    •   Easy handling via turning knob and push button Loading and saving via SD card
    •   Updates via SD card (Supplied)
    SKU: MIK-4152
    €79.00 €109.00
    inc. VAT

     72HR STOCK
  • V-Bar Rotorhead 14mm blade

    V-Bar Rotorhead 14mm blade

    V-Bar Rotorhead , 14mm bladeholder
    SKU: MIK-4042
    €152.80
    inc. VAT

     72HR STOCK
  • V-Bar Rotorhead LOGO 400

    V-Bar Rotorhead LOGO 400

    V-Bar Rotorhead LOGO 400
    SKU: MIK-4164
    €152.80
    inc. VAT

     72HR STOCK
  • VBar "Blueline" 5.3 Express

    VBar "Blueline" 5.3 Express

    Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter – now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (“V-Bar”). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!)

    Features:
    - Auto-Learn Function
    - Preset parameters for many common helicopters
    - Programming via PC, control panel (item 4152), blue-tooth (item 4256) or mobile phone

    Digital operation means maximal control and ultimate precision! This is also true for scale models with multi-blade rotor heads. A scale pilot can set the parameters so that the heli performs very stable reacts more sluggishly. This is advantage for inexperienced novices. You can reach a new dimension of performance even in fast forward or backward flight.

    A further highlight of the VBar is its integrated Heading Hold tail rotor gyro. It has excellent stopping behavior and very constant cyclic and tail rate in any wind condition.

    Highlights:

    Digital flight performance, as in a simulator
    Very resistant to wind
    Continuously adjustable head set-up, from mild to wild
    Weight-reduced, no-play rotor head with less parts
    Straightforward set-up, easily reproduced
    Reduced air drag, releasing more power and giving longer flight times (e-powered helis!)

    Virtual Flybar System: Another innovative technology developed and produced in Germany.

    SKU: MIK-4371
    €299.00
    inc. VAT

  • VBar Control Alu-Case Radio Set With Blue VBasic Receiver

    VBar Control Alu-Case Radio Set With Blue VBasic Receiver

    VBar Control Alu-case, blue VBasic Receiver

    Note:

    The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

    Software Highlights:

    • Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    • No computer, control panel or smartphone necessary.
    • Instant access to almost every flight parameter from the transmitter controls, even in flight.
    • Easy programming for new helicopters via the familiar VBar setup wizard.
    • New ESC setup wizard for programming all types of speed controllers.
    • Bank switching with three banks.
    • Real time logging and real time vibration analysis readable from the transmitter.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    • Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    • Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Software updates via internet using a simple VBar Control Manager app and the web browser.
    • Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    • Airplane software available as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:

    • 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity on both transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    • Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick equipped with optional throw limiter.
    • Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • 3-point neck-strap attachment, for optimum balance.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Internal 8 MB flash memory.
    • Memory accessible as a USB memory stick, no drivers needed.
    • 4.000 mAh Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power Supply for fast charging included.

    Specifications VBar Control:

    • Band: 2,4 GHz
    • Flight Mode: Mode 1-4 (Mode 2 default)
    • Model Type: All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry: Telemetry with optional sensors available
    • Frame Rate: 10 ms
    • Range: Full
    • Modulation: 80 Chanel FHSS
    • Proportional inpits: 12
    • Flight Modes: 4 Positions
    • Memory: Flashmemory
    • Transmitter Battery: Lipo 1S 4000mAh
    • Charger: Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter:VBar Control
    • VBar Receiver: VBar NEO VBasic Receiver
    • VBar: -
    • Charger: External fast charger with Intl and Domestic AC adapter
    • Accessories: USB cable, Neck strap, VBar Control key chain

     

    SKU: MIK-05106
    €1449.00
    inc. VAT

     72HR STOCK
  • VBar Control Alu-case, Black, VBasic Receiver

    VBar Control Alu-case, Black, VBasic Receiver

    VBar Control Alu-case, blue VBasic Receiver

    Note:

    The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

    Software Highlights:

    • Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    • No computer, control panel or smartphone necessary.
    • Instant access to almost every flight parameter from the transmitter controls, even in flight.
    • Easy programming for new helicopters via the familiar VBar setup wizard.
    • New ESC setup wizard for programming all types of speed controllers.
    • Bank switching with three banks.
    • Real time logging and real time vibration analysis readable from the transmitter.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    • Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    • Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Software updates via internet using a simple VBar Control Manager app and the web browser.
    • Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    • Airplane software available as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:

    • 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity on both transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    • Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick equipped with optional throw limiter.
    • Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • 3-point neck-strap attachment, for optimum balance.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Internal 8 MB flash memory.
    • Memory accessible as a USB memory stick, no drivers needed.
    • 4.000 mAh Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power Supply for fast charging included.

    Specifications VBar Control:

    • Band: 2,4 GHz
    • Flight Mode: Mode 1-4 (Mode 2 default)
    • Model Type: All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry: Telemetry with optional sensors available
    • Frame Rate: 10 ms
    • Range: Full
    • Modulation: 80 Chanel FHSS
    • Proportional inpits: 12
    • Flight Modes: 4 Positions
    • Memory: Flashmemory
    • Transmitter Battery: Lipo 1S 4000mAh
    • Charger: Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter: VBar Control
    • VBar Receiver: VBar NEO VBasic Receiver
    • VBar: -
    • Charger: External fast charger with Intl and Domestic AC adapter
    • Accessories: USB cable, Neck strap, VBar Control key chain

     

    SKU: MIK-05108
    €1449.00
    inc. VAT

     72HR STOCK
  • VBar Control Alu-case, Gun, VBasic Receiver

    VBar Control Alu-case, Gun, VBasic Receiver

    VBar Control Alu-case, blue VBasic Receiver

    Note:

    The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

    Software Highlights:

    • Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    • No computer, control panel or smartphone necessary.
    • Instant access to almost every flight parameter from the transmitter controls, even in flight.
    • Easy programming for new helicopters via the familiar VBar setup wizard.
    • New ESC setup wizard for programming all types of speed controllers.
    • Bank switching with three banks.
    • Real time logging and real time vibration analysis readable from the transmitter.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    • Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    • Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Software updates via internet using a simple VBar Control Manager app and the web browser.
    • Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    • Airplane software available as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:

    • 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity on both transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    • Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick equipped with optional throw limiter.
    • Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • 3-point neck-strap attachment, for optimum balance.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Internal 8 MB flash memory.
    • Memory accessible as a USB memory stick, no drivers needed.
    • 4.000 mAh Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power Supply for fast charging included.

    Specifications VBar Control:

    • Band: 2,4 GHz
    • Flight Mode: Mode 1-4 (Mode 2 default)
    • Model Type: All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry: Telemetry with optional sensors available
    • Frame Rate: 10 ms
    • Range: Full
    • Modulation: 80 Chanel FHSS
    • Proportional inpits: 12
    • Flight Modes: 4 Positions
    • Memory: Flashmemory
    • Transmitter Battery: Lipo 1S 4000mAh
    • Charger: Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter: VBar Control
    • VBar Receiver: VBar NEO VBasic Receiver
    • VBar: -
    • Charger: External fast charger with Intl and Domestic AC adapter
    • Accessories: USB cable, Neck strap, VBar Control key chain

     

    SKU: MIK-05107
    €1449.00
    inc. VAT

     72HR STOCK
  • VBar Control Custom Line, black/neon-green, VBar NEO

    VBar Control Custom Line, black/neon-green, VBar NEO

    VBar Control Custom Line, black/neon-green, VBar NEO

    Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

    Software Highlights:


    Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    No computer, control panel or smartphone necessary.
    Instant access to almost every flight parameter from the transmitter controls, even in flight.
    Easy programming for new helicopters via the familiar VBar setup wizard.
    New ESC setup wizard for programming all types of speed controllers.
    Bank switching with three banks.
    Real time logging and real time vibration analysis readable from the transmitter.
    Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    Software updates via internet using a simple VBar Control Manager app and the web browser.
    Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:


    80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    Unlimited model memory.
    Virtually unlimited number of control channels.
    High range, low latency, antenna diversity on both transmitter and receiver.
    Intelligent antenna monitoring and management.
    XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    Precision gimbals with four ball bearings, fully adjustable.
    Collective stick equipped with optional throw limiter.
    Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    Delicate rubber lining for comfortable, slip-free and safe holding.
    3-point neck-strap attachment, for optimum balance.
    Large 2 Watt loudspeaker for alarms and voice output.
    Vibration alarm (adjustable).
    Internal 8 MB flash memory.
    Memory accessible as a USB memory stick, no drivers needed.
    4.000 mAh Lithium Polymer battery allows for long run times.
    Charge through USB connector or built-in charger.
    Power Supply for fast charging included.

    Specifications VBar Control

    • Band 2,4 GHz
    • Flight Mode Mode 1-4 (Mode 2 default)
    • Model Type All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry with optional sensors available
    • Frame Rate 10 ms
    • Range Full
    • Modulation 80 Chanel FHSS
    • Proportional inpits 12
    • Flight Modes 4 Positions
    • Memory Flashmemory
    • Transmitter Battery
    • Lipo 1S 4000mAh
    • Charger Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter
    • VBar Control
    • VBar Receiver
    • VBar NEO VBasic Receiver
    • VBar
    • Charger External fast charger with Intl and Domestic AC adapter
    • Accessories USB cable, Neck strap, VBar Control key chain
    SKU: MIK-05217
    €599.00
    inc. VAT

     72HR STOCK
    NEW
  • VBar Control Custom Line, black/neon-yellow, VBar NEO

    VBar Control Custom Line, black/neon-yellow, VBar NEO

    VBar Control Custom Line, black/neon-yellow, VBar NEO

    Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

    Software Highlights:


    Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    No computer, control panel or smartphone necessary.
    Instant access to almost every flight parameter from the transmitter controls, even in flight.
    Easy programming for new helicopters via the familiar VBar setup wizard.
    New ESC setup wizard for programming all types of speed controllers.
    Bank switching with three banks.
    Real time logging and real time vibration analysis readable from the transmitter.
    Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    Software updates via internet using a simple VBar Control Manager app and the web browser.
    Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:


    80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    Unlimited model memory.
    Virtually unlimited number of control channels.
    High range, low latency, antenna diversity on both transmitter and receiver.
    Intelligent antenna monitoring and management.
    XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    Precision gimbals with four ball bearings, fully adjustable.
    Collective stick equipped with optional throw limiter.
    Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    Delicate rubber lining for comfortable, slip-free and safe holding.
    3-point neck-strap attachment, for optimum balance.
    Large 2 Watt loudspeaker for alarms and voice output.
    Vibration alarm (adjustable).
    Internal 8 MB flash memory.
    Memory accessible as a USB memory stick, no drivers needed.
    4.000 mAh Lithium Polymer battery allows for long run times.
    Charge through USB connector or built-in charger.
    Power Supply for fast charging included.

    Specifications VBar Control

    • Band 2,4 GHz
    • Flight Mode Mode 1-4 (Mode 2 default)
    • Model Type All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry with optional sensors available
    • Frame Rate 10 ms
    • Range Full
    • Modulation 80 Chanel FHSS
    • Proportional inpits 12
    • Flight Modes 4 Positions
    • Memory Flashmemory
    • Transmitter Battery
    • Lipo 1S 4000mAh
    • Charger Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter
    • VBar Control
    • VBar Receiver
    • VBar NEO VBasic Receiver
    • VBar
    • Charger External fast charger with Intl and Domestic AC adapter
    • Accessories USB cable, Neck strap, VBar Control key chain
    SKU: MIK-05216
    €599.00
    inc. VAT

     72HR STOCK
    NEW
  • VBar Control Custom Line, black/red with VBar NEO

    VBar Control Custom Line, black/red with VBar NEO

    VBar Control Custom Line, black/red with VBar NEO

    Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

    Software Highlights:


    Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    No computer, control panel or smartphone necessary.
    Instant access to almost every flight parameter from the transmitter controls, even in flight.
    Easy programming for new helicopters via the familiar VBar setup wizard.
    New ESC setup wizard for programming all types of speed controllers.
    Bank switching with three banks.
    Real time logging and real time vibration analysis readable from the transmitter.
    Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    Software updates via internet using a simple VBar Control Manager app and the web browser.
    Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:


    80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    Unlimited model memory.
    Virtually unlimited number of control channels.
    High range, low latency, antenna diversity on both transmitter and receiver.
    Intelligent antenna monitoring and management.
    XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    Precision gimbals with four ball bearings, fully adjustable.
    Collective stick equipped with optional throw limiter.
    Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    Delicate rubber lining for comfortable, slip-free and safe holding.
    3-point neck-strap attachment, for optimum balance.
    Large 2 Watt loudspeaker for alarms and voice output.
    Vibration alarm (adjustable).
    Internal 8 MB flash memory.
    Memory accessible as a USB memory stick, no drivers needed.
    4.000 mAh Lithium Polymer battery allows for long run times.
    Charge through USB connector or built-in charger.
    Power Supply for fast charging included.

    Specifications VBar Control

    • Band 2,4 GHz
    • Flight Mode Mode 1-4 (Mode 2 default)
    • Model Type All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry with optional sensors available
    • Frame Rate 10 ms
    • Range Full
    • Modulation 80 Chanel FHSS
    • Proportional inpits 12
    • Flight Modes 4 Positions
    • Memory Flashmemory
    • Transmitter Battery
    • Lipo 1S 4000mAh
    • Charger Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter
    • VBar Control
    • VBar Receiver
    • VBar NEO VBasic Receiver
    • VBar
    • Charger External fast charger with Intl and Domestic AC adapter
    • Accessories USB cable, Neck strap, VBar Control key chain
    SKU: MIK-05218
    €599.00
    inc. VAT

     72HR STOCK
    NEW
  • VBar Control Fast Charger

    VBar Control Fast Charger

    VBar Control fast charger

    SKU: MIK-04894
    €16.90
    inc. VAT

     72HR STOCK
  • VBar Control Lanyard

    VBar Control Lanyard

    VBar Control lanyard

    SKU: MIK-04893
    €5.00
    inc. VAT

     72HR STOCK
  • VBar Control Lanyard RED

    VBar Control Lanyard RED

    VBar Control lanyard RED

    SKU: MIK-04230
    €5.00
    inc. VAT

     72HR STOCK
  • VBar Control Radio with VBar NEO - Transparent

    VBar Control Radio with VBar NEO - Transparent

    VBar Control radio with VBar NEO - transparent

    Software:

    •         Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    •         No computer, control panel or smartphone necessary.
    •         Instant access to almost every flight parameter from the transmitter controls, even in flight.
    •         Easy programming for new helicopters via the familiar VBar setup wizard.
    •         New ESC setup wizard for programming all types of speed controllers.
    •         Bank switching with three banks.
    •         Real time logging and real time vibration analysis readable from the transmitter.
    •         Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries
    •         Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    •         Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    •         Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    •         Easy bind process, allows bind and fly of any model equipped with VBar Control with your own transmitter
    •         Software updates via internet using a simple VBar Control Manager app and the web browser.
    •         Option for adding new features via apps, supports Windows and Mac OS X-PCs, no drivers needed.
    •         Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware:

    •         80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    •         VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    •         Unlimited model memory.
    •         Virtually unlimited number of control channels.
    •         High range, low latency, antenna diversity on both transmitter and receiver.
    •         Intelligent antenna monitoring and management.
    •         XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness
    •         Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    •         Precision gimbals with four ball bearings, fully adjustable.
    •         Collective stick equipped with optional throw limiter.
    •         Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    •         Delicate rubber lining for comfortable, slip-free and safe holding.
    •         3-point neck-strap attachment, for optimum balance.
    •         Large 2 Watt loudspeaker for alarms and voice output.
    •         Vibration alarm (adjustable).
    •         Internal 8 MB flash memory.
    •         Memory accessible as a USB memory stick, no drivers needed.
    •         4.000 mAh Lithium Polymer battery allows for long run times.
    •         Charge through USB connector or built-in charger.
    •         Power Supply for fast charging included.

    Specifications VBar Control

    • Band     2,4 GHz
    • Flight Mode     Mode 1-4 (Mode 2 default)
    • Model Type     Helicopters, Airplanes (with VPlane Firmware, part of the Pro Update for VBar)
    • Telemetry     Telemetry with optional sensors available
    • Frame Rate     10 ms
    • Range     Full
    • Modulation     80 Chanel FHSS
    • Proportional inpits     12
    • Flight Modes     4 Positions
    • Memory     Flashmemory
    • Transmitter Battery     Lipo 1S 4000mAh
    • Charger     Intl and Domestic AC adapter /USB charging

    Content

    • VBar Transmitter     VBar Control
    • VBar     VBar NEO with VLink
    • Charger     External fast charger with Intl and Domestic AC adapter
    • Accessories     USB cable, Neck strap, VBar Control key chain
    SKU: MIK-04989
    €599.00
    inc. VAT

     72HR STOCK
  • VBar Control Radio with VBar NEO - White

    VBar Control Radio with VBar NEO - White

    VBar Control radio with VBar NEO - White

    Software:

    •             Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    •             No computer, control panel or smartphone necessary.
    •             Instant access to almost every flight parameter from the transmitter controls, even in flight.
    •             Easy programming for new helicopters via the familiar VBar setup wizard.
    •             New ESC setup wizard for programming all types of speed controllers.
    •             Bank switching with three banks.
    •             Real time logging and real time vibration analysis readable from the transmitter.
    •             Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    •             Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    •             Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    •             Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    •             Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    •             Software updates via internet using a simple VBar Control Manager app and the web browser.
    •             Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    •             Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware:

    •             80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    •             VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    •             Unlimited model memory.
    •             Virtually unlimited number of control channels.
    •             High range, low latency, antenna diversity on both transmitter and receiver.
    •             Intelligent antenna monitoring and management.
    •             XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness
    •             Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    •             Precision gimbals with four ball bearings, fully adjustable.
    •             Collective stick equipped with optional throw limiter.
    •             Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    •             Delicate rubber lining for comfortable, slip-free and safe holding.
    •             3-point neck-strap attachment, for optimum balance.
    •             Large 2 Watt loudspeaker for alarms and voice output.
    •             Vibration alarm (adjustable).
    •             Internal 8 MB flash memory.
    •             Memory accessible as a USB memory stick, no drivers needed.
    •             4.000 mAh Lithium Polymer battery allows for long run times.
    •             Charge through USB connector or built-in charger.
    •             Power Supply for fast charging included.

    Specifications VBar Control

    • Band     2,4 GHz
    • Flight Mode     Mode 1-4 (Mode 2 default)
    • Model Type     Helicopters, Airplanes (with VPlane Firmware, part of Pro Update for VBar)
    • Telemetry     Telemetry with optional sensors available
    • Frame Rate     10 ms
    • Range     Full
    • Modulation     80 Chanel FHSS
    • Proportional inpits     12
    • Flight Modes     4 Positions
    • Memory     Flashmemory
    • Transmitter Battery     Lipo 1S 4000mAh
    • Charger     Intl and Domestic AC adapter /USB charginG

    Content

    • VBar Transmitter     VBar Control
    • VBar Receiver     Built into VBar NEO
    • VBar     VBar NEO with built-in VLink receiver
    • Charger     External fast charger with Intl and Domestic AC adapter
    • Accessories     USB cable, Neck strap, VBar Control key chain

     

    SKU: MIK-04981
    €599.00
    inc. VAT

     72HR STOCK
  • VBar Control Radio with VBar NEO, black

    VBar Control Radio with VBar NEO, black

    Mikado VBar Control Radio with RX-Satellite, grey/black

    Software Highlights:

    • Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    • No computer, control panel or smartphone necessary.
    • Instant access to almost every flight parameter from the transmitter controls, even in flight.
    • Easy programming for new helicopters via the familiar VBar setup wizard.
    • New ESC setup wizard for programming all types of speed controllers.
    • Bank switching with three banks.
    • Real time logging and real time vibration analysis readable from the transmitter.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    • Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    • Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Software updates via internet using a simple VBar Control Manager app and the web browser.
    • Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    • Additional airplane software will be available in summer 2014.

    Hardware Highlights:

    • 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity on both transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    • Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick equipped with optional throw limiter.
    • Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • 3-point neck-strap attachment, for optimum balance.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Internal 8 MB flash memory.
    • Memory accessible as a USB memory stick, no drivers needed.
    • 4.000 mAh Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power Supply for fast charging included.

    Specifications VBar Control

    • Band     2,4 GHz
    • Flight Mode Mode 1-4 (Mode 2 default)
    • Model Type Helicopters, Airplanes (with VPlane Firmware, part of the Pro Update for VBar
    • Telemetry Telemetry with optional sensors available
    • Frame Rate 10 ms
    • Range Full
    • Modulation 80 Chanel FHSS
    • Proportional inpits 12
    • Flight Modes  4 Positions
    • Memory Flashmemory
    • Transmitter Battery Lipo 1S 4000mAh
    • Charger Intl and Domestic AC adapter /USB charging

    Content

    • VBar Transmitter     VBar Control
    • VBar     VBar NEO with VLink
    • Charger     External fast charger with Intl and Domestic AC adapter
    • Accessories     USB cable, Neck strap, VBar Control key chain

     

    SKU: MIK-4970
    €599.00
    inc. VAT

     72HR STOCK
  • VBar Control Radio with VBar NEO, blue transparent

    VBar Control Radio with VBar NEO, blue transparent

    The use of the VBar Control radio requires a VBar or Mini-VBar unit with firmware version 6.0 PRO. This version is free for anyone who purchases a VBar Control radio. After registering their VBar Control radio on www.vstabi.info , customers will be able to download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info

    Software Highlights:

    • Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    • No computer, control panel or smartphone necessary.
    • Instant access to almost every flight parameter from the transmitter controls, even in flight.
    • Easy programming for new helicopters via the familiar VBar setup wizard.
    • New ESC setup wizard for programming all types of speed controllers.
    • Bank switching with three banks.
    • Real time logging and real time vibration analysis readable from the transmitter.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    • Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    • Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Software updates via internet using a simple VBar Control Manager app and the web browser.
    • Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    • Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:

    • 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity on both transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    • Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick equipped with optional throw limiter.
    • Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • 3-point neck-strap attachment, for optimum balance.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Internal 8 MB flash memory.
    • Memory accessible as a USB memory stick, no drivers needed.
    • 4.000 mAh Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power Supply for fast charging included.

    Specifications VBar Control:

    • Band 2,4 GHz
    • Flight Mode Mode 1-4 (Mode 2 default)
    • Model Type Helicopters, Airplanes (with VPlane Firmware, part of Pro Update for VBar)
    • Telemetry Telemetry with optional sensors available
    • Frame Rate 10 ms
    • Range Full
    • Modulation 80 Chanel FHSS
    • Proportional inpits 12
    • Flight Modes 4 Positions
    • Memory     Flashmemory
    • Transmitter Battery Lipo 1S 4000mAh
    • Charger Intl and Domestic AC adapter /USB charging

    Content

    • VBar Transmitter     VBar Control
    • VBar     VBar NEO with VLink
    • Charger     External fast charger with Intl and Domestic AC adapter
    • Accessories     USB cable, Neck strap, VBar Control key chain
    •  
    SKU: MIK-4990
    €599.00
    inc. VAT

     72HR STOCK
  • VBar Control RX-Satellite Connection Wire, 120mm

    VBar Control RX-Satellite Connection Wire, 120mm

    VBar Control RX-Satellite Connection Wire, 120mm

    SKU: MIK-4895
    €6.90
    inc. VAT

     72HR STOCK
  • VBar Control RX-Satellite Connection Wire, 200mm

    VBar Control RX-Satellite Connection Wire, 200mm

    VBar Control RX-Satellite Connection Wire, 200mm

    SKU: MIK-4896
    €6.90
    inc. VAT

     72HR STOCK
  • VBar Control Transmitter battery 1S-4000mAh

    VBar Control Transmitter battery 1S-4000mAh

    VBar Control Transmitter battery 1S-4000mAh

    SKU: MIK-4897
    €22.95
    inc. VAT

     LOW STOCK
  • VBar Control TX Rotary knobs colored

    VBar Control TX Rotary knobs colored

    VBar Control TX Rotary knobs colored

    SKU: MIK-05104
    €16.90
    inc. VAT

     72HR STOCK
  • VBar Control/Scorpion ESC-Cable 350mm

    VBar Control/Scorpion ESC-Cable 350mm

    VBar Control/Scorpion ESC-Cable 350mm

    SKU: MIK-05088
    €9.50
    inc. VAT

     IN STOCK
  • VBar Control/Scorpion ESC-Cable 500mm

    VBar Control/Scorpion ESC-Cable 500mm

    VBar Control/Scorpion ESC-Cable 500mm

    SKU: MIK-05089
    €9.50
    inc. VAT

     72HR STOCK
  • VBar mainboard 5.3 Express

    VBar mainboard 5.3 Express

    VBar mainboard blueline .
    The new VBar Blueline mainboard is downward compatible with all existing main units (except for VBar with aluminium case sensor).
    SKU: MIK-4158
    €165.00
    inc. VAT

     72HR STOCK

Manufacturers