Mikado

V-Bar Rotorhead, 12mm blade holder

The days of carrying an expensive laptop to the flying field are over, the new V-Bar Control Panel is the easiest and most practical way of programming the V-Bar. The V-Bar Control Panel is connected directly to the V-Bar via cable and allows you to program the V-Bar with necessary data such as initial set-up and parameter adjustment right at the flying field. The panel features an ergonomically correct turning knob and push button which have been integrated for easy operation, an SD card for loading model data or updating set-up software, and a high-contrast display which is readable even in bright sunlight. The SD card can also be used to transfer model data to another pilot’s helicopter.
 

•   Easy-to-use set-up software
•   High-contrast graphics display
•   Easy handling via turning knob and push button Loading and saving via SD card
•   Updates via SD card (Supplied)

VBar Control Alu-case, blue VBasic Receiver

Note:

The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

Software Highlights:

• Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
• No computer, control panel or smartphone necessary.
• Instant access to almost every flight parameter from the transmitter controls, even in flight.
• Easy programming for new helicopters via the familiar VBar setup wizard.
• New ESC setup wizard for programming all types of speed controllers.
• Bank switching with three banks.
• Real time logging and real time vibration analysis readable from the transmitter.
• Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
• Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control transmitters, fully configurable.
• Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Software updates via internet using a simple VBar Control Manager app and the web browser.
• Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
• Airplane software available as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

Hardware Highlights:

• 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity on both transmitter and receiver.
• Intelligent antenna monitoring and management.
• XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
• Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick equipped with optional throw limiter.
• Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• 3-point neck-strap attachment, for optimum balance.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Internal 8 MB flash memory.
• Memory accessible as a USB memory stick, no drivers needed.
• 4.000 mAh Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power Supply for fast charging included.

Specifications VBar Control:

• Band: 2,4 GHz
• Flight Mode: Mode 1-4 (Mode 2 default)
• Model Type: All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
• Telemetry: Telemetry with optional sensors available
• Frame Rate: 10 ms
• Range: Full
• Modulation: 80 Chanel FHSS
• Proportional inpits: 12
• Flight Modes: 4 Positions
• Memory: Flashmemory
• Transmitter Battery: Lipo 1S 4000mAh
• Charger: Intl and Domestic AC adapter /USB charging

Content:

• VBar Transmitter:VBar Control
• VBar Receiver: VBar NEO VBasic Receiver
• VBar: -
• Charger: External fast charger with Intl and Domestic AC adapter
• Accessories: USB cable, Neck strap, VBar Control key chain

VBar Control Alu-case, blue VBasic Receiver

Note:

The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

Software Highlights:

• Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
• No computer, control panel or smartphone necessary.
• Instant access to almost every flight parameter from the transmitter controls, even in flight.
• Easy programming for new helicopters via the familiar VBar setup wizard.
• New ESC setup wizard for programming all types of speed controllers.
• Bank switching with three banks.
• Real time logging and real time vibration analysis readable from the transmitter.
• Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
• Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control transmitters, fully configurable.
• Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Software updates via internet using a simple VBar Control Manager app and the web browser.
• Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
• Airplane software available as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

Hardware Highlights:

• 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity on both transmitter and receiver.
• Intelligent antenna monitoring and management.
• XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
• Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick equipped with optional throw limiter.
• Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• 3-point neck-strap attachment, for optimum balance.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Internal 8 MB flash memory.
• Memory accessible as a USB memory stick, no drivers needed.
• 4.000 mAh Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power Supply for fast charging included.

Specifications VBar Control:

• Band: 2,4 GHz
• Flight Mode: Mode 1-4 (Mode 2 default)
• Model Type: All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
• Telemetry: Telemetry with optional sensors available
• Frame Rate: 10 ms
• Range: Full
• Modulation: 80 Chanel FHSS
• Proportional inpits: 12
• Flight Modes: 4 Positions
• Memory: Flashmemory
• Transmitter Battery: Lipo 1S 4000mAh
• Charger: Intl and Domestic AC adapter /USB charging

Content:

• VBar Transmitter: VBar Control
• VBar Receiver: VBar NEO VBasic Receiver
• VBar: -
• Charger: External fast charger with Intl and Domestic AC adapter
• Accessories: USB cable, Neck strap, VBar Control key chain

VBar Control lanyard

VBar Control radio with VBar NEO - transparent

Software:

•         Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
•         No computer, control panel or smartphone necessary.
•         Instant access to almost every flight parameter from the transmitter controls, even in flight.
•         Easy programming for new helicopters via the familiar VBar setup wizard.
•         New ESC setup wizard for programming all types of speed controllers.
•         Bank switching with three banks.
•         Real time logging and real time vibration analysis readable from the transmitter.
•         Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries
•         Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
•         Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
•         Wireless buddy boxing with two VBar Control transmitters, fully configurable.
•         Easy bind process, allows bind and fly of any model equipped with VBar Control with your own transmitter
•         Software updates via internet using a simple VBar Control Manager app and the web browser.
•         Option for adding new features via apps, supports Windows and Mac OS X-PCs, no drivers needed.
•         Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

Hardware:

•         80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
•         VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
•         Unlimited model memory.
•         Virtually unlimited number of control channels.
•         High range, low latency, antenna diversity on both transmitter and receiver.
•         Intelligent antenna monitoring and management.
•         XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness
•         Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
•         Precision gimbals with four ball bearings, fully adjustable.
•         Collective stick equipped with optional throw limiter.
•         Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
•         Delicate rubber lining for comfortable, slip-free and safe holding.
•         3-point neck-strap attachment, for optimum balance.
•         Large 2 Watt loudspeaker for alarms and voice output.
•         Vibration alarm (adjustable).
•         Internal 8 MB flash memory.
•         Memory accessible as a USB memory stick, no drivers needed.
•         4.000 mAh Lithium Polymer battery allows for long run times.
•         Charge through USB connector or built-in charger.
•         Power Supply for fast charging included.

Specifications VBar Control

• Band     2,4 GHz
• Flight Mode     Mode 1-4 (Mode 2 default)
• Model Type     Helicopters, Airplanes (with VPlane Firmware, part of the Pro Update for VBar)
• Telemetry     Telemetry with optional sensors available
• Frame Rate     10 ms
• Range     Full
• Modulation     80 Chanel FHSS
• Proportional inpits     12
• Flight Modes     4 Positions
• Memory     Flashmemory
• Transmitter Battery     Lipo 1S 4000mAh
• Charger     Intl and Domestic AC adapter /USB charging

Content

• VBar Transmitter     VBar Control
• VBar     VBar NEO with VLink
• Charger     External fast charger with Intl and Domestic AC adapter
• Accessories     USB cable, Neck strap, VBar Control key chain

Mikado VBar Control Radio with RX-Satellite, grey/black

Software Highlights:

• Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
• No computer, control panel or smartphone necessary.
• Instant access to almost every flight parameter from the transmitter controls, even in flight.
• Easy programming for new helicopters via the familiar VBar setup wizard.
• New ESC setup wizard for programming all types of speed controllers.
• Bank switching with three banks.
• Real time logging and real time vibration analysis readable from the transmitter.
• Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
• Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control transmitters, fully configurable.
• Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Software updates via internet using a simple VBar Control Manager app and the web browser.
• Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
• Additional airplane software will be available in summer 2014.

Hardware Highlights:

• 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity on both transmitter and receiver.
• Intelligent antenna monitoring and management.
• XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
• Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick equipped with optional throw limiter.
• Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• 3-point neck-strap attachment, for optimum balance.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Internal 8 MB flash memory.
• Memory accessible as a USB memory stick, no drivers needed.
• 4.000 mAh Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power Supply for fast charging included.

Specifications VBar Control

• Band     2,4 GHz
• Flight Mode Mode 1-4 (Mode 2 default)
• Model Type Helicopters, Airplanes (with VPlane Firmware, part of the Pro Update for VBar
• Telemetry Telemetry with optional sensors available
• Frame Rate 10 ms
• Range Full
• Modulation 80 Chanel FHSS
• Proportional inpits 12
• Flight Modes  4 Positions
• Memory Flashmemory
• Transmitter Battery Lipo 1S 4000mAh
• Charger Intl and Domestic AC adapter /USB charging

Content

• VBar Transmitter     VBar Control
• VBar     VBar NEO with VLink
• Charger     External fast charger with Intl and Domestic AC adapter
• Accessories     USB cable, Neck strap, VBar Control key chain

VBar Control RX-Satellite Connection Wire, 120mm