Mikado

Mikado
Mikado is a producer of Famous Logo helicopters, made in Germany

Products


  • Mikado VBar NEO Aluminium Case - Blue

    Mikado VBar NEO Aluminium Case - Blue

    Mikado VBar NEO Aluminium Case - Blue

    For devices of the 2nd Generation (V2) only.

     

     

    SKU: MIK-5125
    €34.99
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO Aluminum case, grey

    Mikado VBar NEO Aluminum case, grey

    Mikado VBar NEO Aluminum case, grey

    For devices of the 2nd Generation (V2) only.

     

     

    SKU: MIK-05250
    €34.99
    inc. VAT

     72HR STOCK
  • Mikado VBar NEO VBasic Receiver

    Mikado VBar NEO VBasic Receiver

    Mikado VBar NEO VBasic Receiver

    VBar NEO VBasic (VBasic) is an innovative receiver for VBar Control, setting new standards with regard to range of features, and fit for the future with updates and function extensions.

    Features:

    • Easy setup via VBar Control Setup Wizard and clearly structured menus in VBar Control
    • Using Presets and the Setup Wizard you get ready for flight quickly—for almost any application, like R/C-cars, boats, planes, jets, as a receiver for a multi-rotor flightcontrol, as a receiver for other flybarless systems
    • Competition-ready since it does not use gyros
    • 5 analog control functions and programmable switching functions
    • 9 physical outputs (servo connectors)
    • 3 parameter banks (flight modes/-conditions)
    • 6 mixers with 5 inputs, differential mix, servo-throw adjustment, servo-travel limit
    • expo, trims and multi-rate per parameter bank and control input
    • throttle channel with idle trim (via rotary knob) and throttle idle for each parameter bank
    • innovative, self-learning trim concept without help of gyros (trim while you control the model), optional trim by means of rotary knobs, EDS dial on VBar Control
    • Buddy-boxing ready, also cross-over-buddy-boxing ready (VBar Control together with a radio of a different brand)
    • Model Sharing (bind and fly)
    • Ready for VBar Control telemetry sensors or ­Kontronik® TelMe
    • Event Log
    • Macrocells offer freely programmable mixers, 7-point curves, sequencers e.g. for retracts
    • Multiprotocol Single Line Receiver: connect to other systems via proprietary or open protocols like Futaba® S.Bus, Spektrum® satellite protocol simulation, Universal Digital Interface (UDI), analog PPM8 or PPM12 (8/12 channels), with variable update rate, both as input and output possible
    • Connect multiple VBasic and/or VBar NEO devices via Interbus to get a multi-redundant diversity receiver setup (up to 4 diversity receivers/8 antennae), with up to 23 physical outputs (servo connectors)
    • Ready for updates as they come available—with software updates you can enable VBasic for other purposes, for more complex airplanes (VPlane), for helicopters (VBar), for multi-rotors (VCopter), and VBar and VCopter of course with the tried and tested Rescue feature—all required sensors are already on board

    Specifications:

    • Dimensions     45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight     14 g
    • Supply Voltage     3,5 - 8,4 V (2S Lipo)
    • Content
    • USB cable     Mini USB Cable, Boot Plug
    • main unit     Multiprotocol Single Line Empfänger (Vlink,UDI, S-Bus, Spektrum, PPM)
    • Gyrosensor     Internal multi-axis sensor array (inactive in VBasic, enabled by software updates with cost)
    • Manual     Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • Software     VBasic Receiver Firmware, VExtender
    SKU: MIK-5054
    €119.00
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO VLink + Gyro 6.1 Express

    Mikado VBar NEO VLink + Gyro 6.1 Express

    VBar NEO with built-in VLink receiver + Gyro sensor, with 6.1 Express Software

    Our new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access, and the usage of Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models. Pro implicitely includes the VPlane license.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.1 control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

    Specifications:

    • Dimensions: 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight: 25,3g / 0,85oz
    • Supply Voltage: 3,5 - 8,4 V (2S Lipo)

    Includes:

    • Mini USB cable
    • Boot Plug and Patch cable
    • Gyro pad 10 x 50 x 1,2 mm
    • Gyrosensor    ( Internal multi-axis sensor array plus external Premium 3-Axis Gyro with Silicon Sensing Ring Sensor Technology)
    • Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • 6.1 Express Software with Electric Governor and Bank Switching

    Hardware Requirements:

    • VBar Control Radio
    SKU: MIK-4950
    €349.00
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO VLink 6.1 Express

    Mikado VBar NEO VLink 6.1 Express

    VBar NEO with built-in VLink receiver, with 6.1 Express Software

    The new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains the latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access, and the usage of Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models. Pro implicitely includes the VPlane license.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.1 control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

    Specifications:

    • Dimensions: 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight: 25,3g / 0,85oz
    • Supply Voltage: 3,5 - 8,4 V (2S Lipo)

    Includes:

    • Mini USB cable
    • Patch cable (Boot Plug, Patch cable)
    • Gyro pad 10 x 50 x 1,2 mm
    • Gyrosensor: Internal multi-axis sensor array, additional 3 axis sensor can be connected (not included)
    • Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • 6.1 Express Software with Electric Governor and Bank Switching

    Hardware Requirements:     

    • VBar Control Radio

     

    SKU: MIK-4949
    €248.00
    inc. VAT

     LOW STOCK
  • Mikado VBar Silverline 6.0 PRO with RX-Satellite

    Mikado VBar Silverline 6.0 PRO with RX-Satellite

    Mikado VBar Silverline 6.0 PRO with RX-Satellite

    SKU: MIK-4883
    €269.00
    inc. VAT

     72HR STOCK
  • Mikado Vbar Softtouch rubber cover for VControl switches

    Mikado Vbar Softtouch rubber cover for VControl switches

    Mikado Vbar Softtouch rubber to cover for VControl switches

    SKU: MIK-4955
    €8.90
    inc. VAT

     LOW STOCK
  • Mikado VBar VControl Touch Radio 5.8" Multi-Touch Screen, Wifi

    Mikado VBar VControl Touch Radio 5.8" Multi-Touch Screen, Wifi

    Why? simple,  Check this video- its explaines All

    The Mikado VBar Control Touch Radio is the latest iteration of game changing integration between helicopter gyro and helicopter transmitter.
    Legendary integration and simplicity is still the heart of the VBar Control Touch design, and now features an extra bright 5.8" multi-touch color display,with ambient-light sensor to automatically control the brightness.
    Now including a total of 6 rotary knobs, VBar Control Touch is even more flexible with programming;especially for VPlane Airplane pilots, as four of the six wheels can be used for trim functions.

    Preorder- At the moment we ask for deposit and when the product is arriving we will contact for the rest. Date of delivery is around July

    Underneath the case of the radio is a built in WiFi module used for multiple use scenarios, such as smart phone/tablet interaction, cloud functionality, and over-the-air online updates for VBar Neo gyro. Vbar Control Touch features a fast boot up time, of three seconds. Additionally, an automatic power on feature is present in that if an already bound model is switched on, the VBar Control Touch will power on. Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher.
    This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio.

    Software Highlights:

    •     Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
    •     Readily understandable graphic user interface.
    •     Easy programming for new models via the familiar VBar setup wizard.
    •     ESC setup wizard for programming all types of speed controllers.
    •     ESCs with VBar Control support can be programmed directly from the radio.
    •     Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
    •     Bank switching with three banks (fourth Bank Autorotation optional).
    •     Real time logging and real time graphic vibration analysis available on display.
    •     Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
    •     Create your own screendesign directly on the touchscreen display.
    •     Full manual available on the radio by means of context sensitive help.
    •     Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    •     Automatic power-on, if an already bound model is switched on.
    •     Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
    •     Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    •     Wireless buddy boxing with two VBar Control radios, fully configurable.
    •     Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)
    •     Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
    •     Access our App Store and do over-the-air online-updates via WiFi*.
    •     Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

    Hardware Highlights:

    •     Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
    •     Very good readability even in bright sunlight.
    •     WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
    •     Very fast start-up time, from off to fully operational in three seconds.
    •     High perfomance low power controller for best user experience and long runtimes.
    •     Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    •     Unlimited model memory.
    •     Virtually unlimited number of control channels.
    •     High range, low latency, antenna diversity both on transmitter and receiver.
    •     Intelligent antenna monitoring and management.
    •     Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
    •     Precision gimbals with four ball bearings, fully adjustable.
    •     Collective stick can be equipped with optional throw limiter.
    •     Delicate rubber lining for comfortable, slip-free and safe holding.
    •     Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
    •     Large 2 Watt loudspeaker for alarms and voice output.
    •     Vibration alarm (adjustable).
    •     Memory accessible as a USB memory stick, no drivers needed.
    •     Built-in Lithium Polymer battery allows for long run times.
    •     Charge through USB connector or built-in charger.
    •     Power supply for fast charging included.

    * Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data pla

    SKU: MIK-5130
    €999.00
    inc. VAT

     72HR STOCK
  • Mikado Velcro straps 20x280mm (4 pcs)

    Mikado Velcro straps 20x280mm (4 pcs)

    Mikado Velcro straps 20x280mm (4 pcs)

    SKU: MIK-4918
    €9.60
    inc. VAT

     72HR STOCK
  • Mikado Vertical fin, LOGO 700

    Mikado Vertical fin, LOGO 700

    Mikado Vertical fin, LOGO 700

    SKU: MIK-5043
    €18.90
    inc. VAT

     72HR STOCK
  • Mikado VSim, wireless simulator interface

    Mikado VSim, wireless simulator interface

    Mikado VSim, wireless simulator interface

    SKU: MIK-4928
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado VTX-697mm Premium RotorBlades

    Mikado VTX-697mm Premium RotorBlades

    Mikado VTX 697mm Premium RotorBlades

    No compromises- That was the VTX mindset when they set out to revolutionize the r/c helicopter rotor blade. From the very first sketches, outlining their goals, every decision made was performance based. It was not the easiest nor the fastest road, but it was the only way to design and bring to market the finest rotor blade available.

    Form follows function taken to the next level- Literally every millimeter of the rotor blade is aero data driven. What does this mean? There were no preconceived notions of what the perfect rotor blade should or shouldn’t look like. The VTX team let the aerodynamics have the first and last word, just as it should be.

    Unique- Not just a buzz word. Every size of VTX rotor blade is unique in form. That is because each size is unique in the way it performs best. Scalability was never an option. That would have been compromising the goal of bringing the finest rotor blade to the market.

    Specifications:

    • Length: Approx. 697mm
    • Weight: Approx. 196g
    • CG: Approx. 340mm from center of bolt
    • Max Chord: 74mm
    • Root: 12mm
    • Bolt Hole: 5mm
    • Safety: Internal Safety Chord

     

    SKU: MIK-5013
    €165.00
    inc. VAT

     LOW STOCK
  • Mikado VTX-717 Premium Carbon Rotorblade, B-Surface

    Mikado VTX-717 Premium Carbon Rotorblade, B-Surface

    VTX-717mm Premium Carbon RotorBlades B-Surface

    These are slight seconds, only small cosmetic flaws, the odd lump, bump or run in the paint fantastic value for money!

    No compromises- That was the VTX mindset when they set out to revolutionize the r/c helicopter rotor blade. From the very first sketches, outlining their goals, every decision made was performance based. It was not the easiest nor the fastest road, but it was the only way to design and bring to market the finest rotor blade available.

    Form follows function taken to the next level- Literally every millimeter of the rotor blade is aero data driven. What does this mean? There were no preconceived notions of what the perfect rotor blade should or shouldn’t look like. The VTX team let the aerodynamics have the first and last word, just as it should be.

    Unique- Not just a buzz word. Every size of VTX rotor blade is unique in form. That is because each size is unique in the way it performs best. Scalability was never an option. That would have been compromising the goal of bringing the finest rotor blade to the market.

    Specifications:

    • Length: Approx. 717mm
    • Weight: Approx. 209g
    • CG: Approx. 357mm from center of bolt
    • Max Chord: 75mm
    • Root: 12mm
    • Bolt Hole: 5mm
    • Safety: Internal Safety Chord

     

    SKU: MIK-5060
    €119.00
    inc. VAT

  • Mikado-LOGO T-Shirt yellow-orange-red, XXL

    Mikado-LOGO T-Shirt yellow-orange-red, XXL

    Mikado/LOGO T-Shirt yellow/orange/red, XXL

    SKU: MIK-4853/5
    €22.00
    inc. VAT

     72HR STOCK
  • Mini USB cable for V-bar

    Mini USB cable for V-bar

    Mini USB cable for V-bar
    SKU: MIK-4138
    €7.90
    inc. VAT

     72HR STOCK
  • Mixing arm lever

    Mixing arm lever

    Mixing arm lever with slide bearing

    SKU: MIK-3083
    €9.50
    inc. VAT

     LOW STOCK
  • Mixing Arm without Ball Bearing

    Mixing Arm without Ball Bearing

    Mixing arm without ball bearing

    SKU: MIK-2323
    €5.30
    inc. VAT

     IN STOCK
  • Mixing arms ball raced

    Mixing arms ball raced

    Mixing arms ball raced
    SKU: Mik-4001
    €26.00
    inc. VAT

     IN STOCK
  • Motor counterbearing W/main shaft sup.

    Motor counterbearing W/main shaft sup.

    Motor counterbearing for 5mm shafts with mainshaft support.

    Please use only in combination with plastic mainframe and mainshaft MIK-4620.

    SKU: MIK-4714
    €34.90
    inc. VAT

     LOW STOCK
  • Motor counterbearing with main shaft support LOGO 690SX

    Motor counterbearing with main shaft support LOGO 690SX

    Motor counterbearing with main shaft support LOGO 690SX

    SKU: MIK-4881
    €34.90
    inc. VAT

     LOW STOCK
  • Motor counterbearing with main shaft support, 6mm

    Motor counterbearing with main shaft support, 6mm

    Motor counterbearing with main shaft support, 6mm 

    SKU: MIK-4622
    €34.80
    inc. VAT

     72HR STOCK
  • Motor counterbearing/main shaft support upgrade kit

    Motor counterbearing/main shaft support upgrade kit

    Motor counterbearing/main shaft support upgrade kit for:
    LOGO 600 series with motorshaft dia. 6mm.

    SKU: MIK-4837
    €42.90
    inc. VAT

     72HR STOCK
  • Motor Mounting Plate LOGO XXtreme 700 & 800

    Motor Mounting Plate LOGO XXtreme 700 & 800

    Motor Mounting Plate, LOGO XXtreme 700 & 800
    SKU: MIK-4544
    €19.90
    inc. VAT

     72HR STOCK
  • Motor Plate LOGO

    Motor Plate LOGO

    Motor plate LOGO 10/16/20

    SKU: MIK-2379
    €18.00
    inc. VAT

     LOW STOCK

Manufacturers