Mikado

Mikado
Mikado is a producer of Famous Logo helicopters, made in Germany

Products


  • Mikado LOGO 690 SX Canopy Red/Blue

    Mikado LOGO 690 SX Canopy Red/Blue

    Mikado Canopy for Logo 690 sx Red/Blue

    SKU: MIK-4973
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 690 SX One way hub

    Mikado LOGO 690 SX One way hub

    One way hub for Mikado LOGO 690 SX

    SKU: MIK-4876
    €29.90
    inc. VAT

     IN STOCK
  • Mikado LOGO 690 SX V2 Kit

    Mikado LOGO 690 SX V2 Kit

    The new LOGO 690 SX V2 from Mikado is a cross-over model, combining the best of 600 and 700 size helicopters. This makes for extraordinary flight performance.

    •     LOGO 690 SX—a 700 size heli with a weight of just 4.8 kg (12S-5,000)
    •     light und durable chassis fiberglass reinforced frame with battery quick release system
    •     for 12S Lipo battery, 4,000 mAh to 5,000 mAh
    •     aluminum swashplate with new geometry for quicker cyclic response
    •     robust tail drive via HTD-belt with aluminum drive pulleys
    •     stronger blade grips with 5 mm blade grip bolt
    •     stronger free wheel for higher torque
    •     additional aluminum/carbon battery tray  
    •     reinforced clamp ring for main rotor shaft
    •     herringbone main gear makes for smooth sound
    •     extra-stiff carbon tail boom brace
    •     new airbrushed chassis cover lets you identify the flight attitude of the heli more easily
    •     glass-fiber airbrushed canopy with new look

    Specifications

    • Rotor diameter 1,550 mm
    • Rotor blades 690 mm
    • RTF weight 4.8 kg
    • Recommended battery 12S Lipo (4.000-5.000 mAh)
    • Main gear ratio    1:7.06
    • Tail gear ratio    1:4,76
    • Main Gear size    106 Module 1
    • batterie slot    58 x 55 x 330 mm
    • Length 1,340 mm
    • Hight 390 mm
    • Width 330 mm

    Content

    • Kit LOGO 690 SX V2
    • Anti Static Kit
    • Illustrated Manual
    • Blades Carbon 690 mm
    • Tail Blades Carbon 105 mm
    SKU: MIK-2146
    €689.00
    inc. VAT

  • Mikado LOGO 690 SX-V2 Scorpion Motor Combo

    Mikado LOGO 690 SX-V2 Scorpion Motor Combo

    The new LOGO 690 SX from Mikado is a cross-over model, combining the best of 600 and 700 size helicopters. This makes for extraordinary flight performance.

    •     LOGO 690 SX—a 700 size heli with a weight of just 4.8 kg (12S-5,000)
    •     light und durable chassis fiberglass reinforced frame with battery quick release system
    •     for 12S Lipo battery, 4,000 mAh to 5,000 mAh
    •     aluminum swashplate with new geometry for quicker cyclic response
    •     robust tail drive via HTD-belt with aluminum drive pulleys
    •     stronger blade grips with 5 mm blade grip bolt
    •     stronger free wheel for higher torque
    •     additional aluminum/carbon battery tray  
    •     reinforced clamp ring for main rotor shaft
    •     herringbone main gear makes for smooth sound
    •     extra-stiff carbon tail boom brace
    •     new airbrushed chassis cover lets you identify the flight attitude of the heli more easily
    •     glass-fiber airbrushed canopy with new look

    Specifications Helicopter

    • Rotor diameter    1,550 mm
    • Rotor blades    690 mm
    • RTF weight    4.8 kg
    • recommended batterie    12S Lipo (4.000-5.000 mAh)
    • Main gear ratio    1:7.06
    • Tail gear ratio    1:4,76
    • Main Gear size    106 Module 1
    • batterie slot    58 x 55 x 330 mm
    • Length    1,340 mm
    • Hight    390 mm
    • Width    330 mm

    Content

    • Kit LOGO 690 SX
    • Anti Static Kit
    • Illustrated Manual
    • Motor Scorpion HK 4525-370 kV, Mikado Edition
    • Motor pinion 15 teeth
    • Blades Carbon 690 mm
    • Tail Blades Carbon 105 mm
    SKU: MIK-2147
    €879.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 700 VBar/Scorpion Motor Combo

    Mikado LOGO 700 VBar/Scorpion Motor Combo

    Systematically designed and put to the test, for tough competition flying. The ideal 700 size machine, for every pilot, for every style of flying.

    The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

    It utilizes tried and tested mechanical components like

    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
    • Belt step-up gear to the tail gear box in the chassis.
    • Torque tube.
    • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

    To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft. you need 55mm shaft to be able to use Logo 700

    In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    Color accents to the tail fin also help with visibility.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

    In the kit:

    • Motor: Scorpion 4525-520 Kv Ultimate with 6 x 55 mm motor shaft
    • Motor pinion:13 teeth pinion, modul 1 with 25° lead angle
    • VBar electronic: VBar NEO
    • Blades: Rotortech 690mm
    • Tail Blades: Carbon Tail Rotor Blades 105 mm
    • Canopy:Airbrush Glas Fiber Canopy
    SKU: MIK-2128
    €1479.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 700 VTX 697 Blades Combo

    Mikado LOGO 700 VTX 697 Blades Combo

    Systematically designed and put to the test, for tough competition flying. The ideal 700 size machine, for every pilot, for every style of flying.

    in this kit Blades  VTX 697 included

    The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

    It utilizes tried and tested mechanical components like

    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
    • Belt step-up gear to the tail gear box in the chassis.
    • Torque tube.
    • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

    To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft. you need 55mm shaft to be able to use Logo 700

    In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    Color accents to the tail fin also help with visibility.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

    Included

    • Logo 700 kit
    • Blades: VTX Carbon Rotor Blades 697 mm
    • Tail Blades: Carbon Tail Rotor Blades 105 mm
    • Canopy: Airbrush Glas Fiber Canopy
    SKU: MIK-2127
    €979.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 700 VTX 717 Blades Combo

    Mikado LOGO 700 VTX 717 Blades Combo

    Systematically designed and put to the test, for tough competition flying. The ideal 700 size machine, for every pilot, for every style of flying.

    In this kit Blades VTX 717 are included.

    The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

    It utilizes tried and tested mechanical components like

    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
    • Belt step-up gear to the tail gear box in the chassis.
    • Torque tube.
    • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

    To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft. you need 55mm shaft to be able to use Logo 700

    In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    Color accents to the tail fin also help with visibility.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

    Included in the kit:

    • Logo 700 kit
    • Blades: VTX Carbon Rotor Blades 717 mm
    • Tail Blades :Carbon Tail Rotor Blades 105 mm
    • Canopy:Airbrush Glas Fiber Canopy
    SKU: LOGO700-MIK2126
    €999.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 800 XXtreme 3D Helicopter Kit

    Mikado LOGO 800 XXtreme 3D Helicopter Kit

    With the introduction of the LOGO XXTREME Mikado rings in a new era for electric model helicopters. Pilots are bound to be fascinated by the sheer size of the machine and by its ultra-sharp design.

    Technical details:

    • Extreme 3D helicopter for 700 - 800 mm rotor blades
    • Suitable for 14S lipo batteries
    • Very rigid and light carbon chassis
    • New mounting system for batteries for optimal determination of CG and quick change of batteries
    • New rotor head design with 12 mm hollow spindle and 23 mm thrust bearings
    • Hollow 14 mm main rotor shaft
    • Herringbone main gear, 175 teeth, module 1
    • Tail torque tube drive with large bevel gears
    • 6 mm tail shaft
    • 25 mm tail boom

    Specifications Helicopter

    • Rotor diameter 1,80m
    • Rotor blades 813mm EDGE
    • RTF weight ca. 6kg
    • Recommended battery 2 * 7S LiPo 5000
    • Main gear ratio 9,21 - 10,29 (Pinion 17-19 teeth)
    • Main Gear size 175 teeth Modul 1

    Kit Content

    • Kit with pre-assembled components
    • Detailed printed manual
    • Blades 813mm EDGE
    • Tail Blades 115mm EDGE
    • Airbrushed Canopy

     

    SKU: MIK-02219
    €999.00
    inc. VAT

  • Mikado LOGO 800 XXtreme 3D Helicopter Kit White-Red

    Mikado LOGO 800 XXtreme 3D Helicopter Kit White-Red

    With the introduction of the LOGO XXTREME Mikado rings in a new era for electric model helicopters. Pilots are bound to be fascinated by the sheer size of the machine and by its ultra-sharp design. Technical details:

      Extreme 3D helicopter for 700 - 800 mm rotor blades
      Suitable for 14S lipo batteries
      Very rigid and light carbon chassis
      New mounting system for batteries for optimal determination of CG and quick change of batteries
      New rotor head design with 12 mm hollow spindle and 23 mm thrust bearings
      Hollow 14 mm main rotor shaft
      Herringbone main gear, 175 teeth, module 1
      Tail torque tube drive with large bevel gears
      6 mm tail shaft
      25 mm tail boom

    Specifications Helicopter

    •   Rotor diameter 1,80m
    •   Rotor blades 813mm EDGE
    •   RTF weight ca. 6kg
    •   Recommended battery 2 * 7S LiPo 5000
    •   Main gear ratio 9,21 - 10,29 (Pinion 17-19 teeth)
    •   Main Gear size 175 teeth Modul 1


    Kit Content

    •   Kit with pre-assembled components
    •   Detailed printed manual
    •   Blades 813mm EDGE
    •   Tail Blades 115mm EDGE
    •   Airbrushed Canopy

     

    SKU: MIK-2177
    €979.00
    inc. VAT

     72HR STOCK
  • Mikado Logo Ball Links 2.5 mm (10 pieces)

    Mikado Logo Ball Links 2.5 mm (10 pieces)

    Ball links 2.5 mm (10 pieces)

    For all Logo

    SKU: MIK-1565
    €6.50
    inc. VAT

     IN STOCK
  • Mikado Logo Dampner set extra hard

    Mikado Logo Dampner set extra hard

    Mikado Logo Dampner set extra hard

    SKU: MIK-3092
    €3.50
    inc. VAT

     LOW STOCK
  • Mikado Logo Driven Belt 564 XL

    Mikado Logo Driven Belt 564 XL

    Driven belt 564 XL

    SKU: MIK-2444
    €11.90
    inc. VAT

     LOW STOCK
  • Mikado Lower sideframe left, LOGO 700

    Mikado Lower sideframe left, LOGO 700

    Mikado Lower sideframe left, LOGO 700

    SKU: MIK-5031
    €19.90
    inc. VAT

     LOW STOCK
  • Mikado Lower sideframe right, LOGO 700

    Mikado Lower sideframe right, LOGO 700

    Mikado Lower sideframe right, LOGO 700

    SKU: MIK-5030
    €19.90
    inc. VAT

     LOW STOCK
  • Mikado Maingear 136 teeth, modul 1 LOGO 700

    Mikado Maingear 136 teeth, modul 1 LOGO 700

    Mikado Maingear 136 teeth, modul 1 LOGO 700
    SKU: MIK-5017
    €18.90
    inc. VAT

     LOW STOCK
  • Mikado Motor counterbearing plate, LOGO 700

    Mikado Motor counterbearing plate, LOGO 700

    Mikado Motor counterbearing plate, LOGO 700

    SKU: MIK-5024
    €22.90
    inc. VAT

     LOW STOCK
  • Mikado Motorplate, LOGO 700

    Mikado Motorplate, LOGO 700

    Mikado Motorplate, LOGO 700

    SKU: MIK-5023
    €25.90
    inc. VAT

     LOW STOCK
  • Mikado Mounting block for bevel/belt gear, LOGO 700

    Mikado Mounting block for bevel/belt gear, LOGO 700

    Mikado Mounting block for bevel/belt gear, LOGO 700

    SKU: MIK-5020
    €14.50
    inc. VAT

     LOW STOCK
  • Mikado Neck strap with soft pad for VControl tray

    Mikado Neck strap with soft pad for VControl tray

    Neck strap with soft pad for VControl tray

    SKU: MIK-05223
    €14.90
    inc. VAT

     72HR STOCK
    NEW
  • Mikado Nitro GLOGO 690SX helicopter kit with blades

    Mikado Nitro GLOGO 690SX helicopter kit with blades

    This model has been designed and thoroughly tested by our Team Pilot Kyle Dahl, he has even flown it in competition already. The prototype took a respectable 5th place at this year‘s Global 3D, in a field dominated by top pilots with very powerful and capable electric models.
    Compared to other nitro helicopters of it‘s size, it is very light (from 4,100-4,350 g / 9.04-9.59 lb dry), which results in very good flight peformance for the given type of drive.
    The GLOGO 690 comes with a sleek and aerodynamic canopy which fits nicely between our electric helicopters, but has sufficient personality of it‘s own.
    The GLOGO 690 will not be offered as a conversion kit.

    Engines between 91 and 120 cu. in. can be used, together with a compatible muffler. Both has
    to be purchased separately.

    Mikado hasn’t had a model for the nitro market in 26 years, but the ultra light GLOGO 690 is the model worthy to bring NITRO back to MIKADO!

    THE benefits at a glance:

        Due to the plastic rotor blade grips, belt drive, and super light tail box, it makes the GLOGO 690 one of the (if not the actual) lightest Nitro model on the market.
        Because of the light belt drive and ultra light tail box, we did not have to use a larger main gear, or front mounted servos with bell cranks in order to attain proper CG.
        As a result of the small main gear, and direct control servos, we were able to make a very small and aerodynamic canopy which provides ultimate performance and looks for the model.
        Utilizes the Synergy XL Spec Clutch which provides no slip engagement even at very low main rotor RPM.
        One piece carbon side plates provide a stronger frame around the clutch stack area.
        Clutch stack is mounted using 8 x M3 bolts, providing very strong and perfect alignment.
        Designated wiring routes with frame grommets and zip tie slots, to take wires from the front of the model towards the rear.
        Large front battery tray allows space for the use of large RX batteries so you can fly all day without charging!
        Boom supports mounted with threaded rod and nuts, which allows you to service them without dismounting the muffler.
        Plenty of mounting places for auxiliary equipment such as remote glow drivers, back up guards, etc.
        The proven rotor head design has been in use on the LOGO 690 for nearly four years now. It is lightweight, and perfectly functional for this nitro model application.
        Recommended main rotor blade sizes are 650-700 mm, depending on your personal taste and style of flying.
        To power the GLOGO, you can use any nitro engine between the size of 91-120. In our testing we used OS91, YS96, and OS105 engines.
        In the beginning, there will be one gear ratio available: 8.15 with a 13 tooth pinion. In the future we may offer a 14 tooth pinion which will give a gear ratio of 7.57 for use with smaller 650 blades and higher RPM.
        The newly designed canopy of the GLOGO 690 combines the known and appealing design and visibility with fantastic aerodynamics: this helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
        Colored tail fins also help with visibility.
        Proudly partnered with Synergy Model Helicopters, to utilize their proven Fuel Tank, Fan, and Fan shroud, along with the Synergy XL Spec Clutch.
        With off-the-shelf components, an all up weight of 4.1-4.35 kg (no fuel) is possible, depending on your component choices.

     

    It utilizes tried and tested components from the existing LOGO 690 such as:

    • 106 T Herring bone gear which is quiet, strong, and efficient
    • aluminum swashplate with new geometry for quicker cyclic response
    • robust tail drive via HTD-belt, with aluminum drive pulleys
    • stronger blade grips with Ø 5 mm blade grip bolt
    • stronger free wheel for higher torque
    • reinforced clamp ring for main rotor shaft

    Specifications:

    • Rotor diameter 1,560 mm
    • Rotor blades e.g. VTX 697, Rotortech 690
    • RTF weight  4.100 - 4.350 g (dry)
    • Recommended batterie  rx-Lipo 2s-5,000 mAh
    • Main gear ratio 8,15
    • Main Gear size 106 teeth, modul 1
    • Length 1,300 mm
    • Hight 425 mm

    Content :

    • Manual
    • Illustrated Manual
    • Motor pinion 13 teeth
    • Blades CFK-Main Rotor Blades
    • Tail Blades CFK-Tail Rotor Blades
    • Canopy
    • Airbrush-Canopy

    Accessories:

    • Motor
    • recommended: Nitro Engine 90-120
    • VBar electronic
    • VBar NEO
    SKU: MIK-05212
    €999.00
    inc. VAT

     PREORDER
    NEW
  • Mikado One way hub, LOGO 700

    Mikado One way hub, LOGO 700

    Mikado One way hub, LOGO 700
    SKU: MIK-5018
    €25.90
    inc. VAT

     LOW STOCK
  • Mikado Pocket bag black for VBar Control

    Mikado Pocket bag black for VBar Control

    Mikado Pocket bag black for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4927
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado Pocket bag blue for VBar Control

    Mikado Pocket bag blue for VBar Control

    Mikado Pocket bag blue for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4985
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado Pocket bag brown for VBar Control

    Mikado Pocket bag brown for VBar Control

    Mikado Pocket bag brown for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4984
    €99.00
    inc. VAT

     72HR STOCK

Manufacturers