Mikado Current/Voltage/Capacitysensor for VBar Control
Hardware Features of the Current/Voltage/Capacity Sensor for flight packs:
Individually precision calibrated
Optocoupler
Reverse battery protection
No influence from motor or current carrying wires
Software Features:
Direct displaying from voltage and capacity
Max. current and min. voltage storage
Logfile data from the flight
Battery Logbook with names
Adjustable capacity, residual capacity and voltage for each battery
Residual capacity is shown as bar in the radio display
Overdischarge Warning
Warning at use of not fully charged batteries
Loud speaker announcement for reducing battery capacity
Notes:
Requires a VBar with Spektrum Satellite connectors (telemetry bus for VBar Control)
Not suitable for measuring receiver packs only (e.g. on a nitro heli)
extracted capacities are not added up, measurement only on a per-flight basis
Specifications:
Current Consumption 2.5 mA
Working Temperature Range -5 to 50 °C, 23 to 122 °F
Dimensions approx. 20 x 20 x 10 mm
Power Rating 120 A continuous, 330 A peak
Effective Range (current) 0.1 A to 300 A
Effective Range (voltage) 5 V to 100 V (2s to 16s LiPo)
Resolution 0.01 A / 0.01 V
Contents:
Device Voltage/Current Sensor with connecting wires to battery and ESC
Connecting Wire Sensor wire 500 mm
LOGO 690 Fusion is a fuselage kit for the LOGO 690 SX.
It's sleek and streamlined design with the fluent passage between canopy and tail boom cover improve the speed flying capabilities of the 690.
The improved visibility makes dynamic and big air flying even more fun.
3D-flight is of course also possible with the LOGO Fusion. The light takeoff-weight beginning at approx. 10.8 pounds (equipped with 12s 5.000 mAh batteries) makes the machine very nimble.
The tail boom cover slides onto the LOGO 690 SX mechanics and is bolted to the prepared mounting points on the V2 chassis. At the tail, it is held by additional clamps.
All r/c components keep their place on the mechanics, they are well accessible when you remove the large canopy. The Fusion Fuselage Kit comes ready to mount, including a new chassis box in black and all the required small parts for the assembly, for the LOGO 690 SX mechanics.
Please take note: this Fuselage Kit only fits the LOGO 690 SX.
It will take considerable efforts to update other models of the LOGO 600 line.
If in doubt, please consult the manual of your LOGO helicopter and the current manual of the LOGO 690 SX, to see what is different.