Mikado

Mikado
Mikado is a producer of Famous Logo helicopters, made in Germany

Products


  • LOGO 600 Canopy White Star

    LOGO 600 Canopy White Star

    LOGO 600 Canopy White Star

    SKU: MIK-4421
    €59.00
    inc. VAT

     72HR STOCK
  • LOGO 600 Carbon vertical fin w ball bearing, green

    LOGO 600 Carbon vertical fin w ball bearing, green

    LOGO 600 Carbon vertical fin w ball bearing, green

    SKU: MIK-05197
    €26.90
    inc. VAT

     72HR STOCK
    NEW
  • LOGO 600 Carbon vertical fin w ball bearing, yellow

    LOGO 600 Carbon vertical fin w ball bearing, yellow

    LOGO 600 Carbon vertical fin w ball bearing, yellow

    SKU: MIK-05196
    €26.90
    inc. VAT

     72HR STOCK
    NEW
  • LOGO 600 Carbon vertical fin w/ball bearing, red

    LOGO 600 Carbon vertical fin w/ball bearing, red

    LOGO 600 Carbon vertical fin w/ball bearing, red

    SKU: MIK-05198
    €26.90
    inc. VAT

    NEW
  • LOGO 600 Carbon vertical fin, white-green

    LOGO 600 Carbon vertical fin, white-green

    LOGO 600 Carbon vertical fin, white-green

    SKU: MIK-05200
    €26.90
    inc. VAT

     72HR STOCK
    NEW
  • LOGO 600 Carbon vertical fin, white-orange

    LOGO 600 Carbon vertical fin, white-orange

    LOGO 600 Carbon vertical fin, white-orange

    SKU: MIK-05199
    €26.90
    inc. VAT

     72HR STOCK
    NEW
  • LOGO 600 SE / 690 SX Distance Bolt dia. 5 x 49mm

    LOGO 600 SE / 690 SX Distance Bolt dia. 5 x 49mm

    LOGO 600 SE / 690 SX Distance bolt dia.5 x 49mm

    SKU: MIK-04917
    €5.50
    inc. VAT

     LOW STOCK
  • LOGO 600/690 SX O-ring Damper Medium 80 Shore

    LOGO 600/690 SX O-ring Damper Medium 80 Shore

    LOGO 600/690 SX O-ring damper medium 80 shore

    SKU: MIK-04788
    €5.00
    inc. VAT

     LOW STOCK
  • LOGO 690 SX  Ball bolt set swashplate (7pcs)

    LOGO 690 SX Ball bolt set swashplate (7pcs)

    LOGO 690 SX  Ball bolt set swashplate (7pcs)

    SKU: MIK-4872
    €13.50
    inc. VAT

     LOW STOCK
  • LOGO 700 Main gear cover

    LOGO 700 Main gear cover

    LOGO 700 Main gear cover

    SKU: MIK-05082
    €42.50
    inc. VAT

     IN STOCK
  • LOGO 700 Motor counterbearing plate, 8mm shaft

    LOGO 700 Motor counterbearing plate, 8mm shaft

    LOGO 700 Motor counterbearing plate, 8mm shaft

    SKU: MIK-05209
    €22.50
    inc. VAT

     72HR STOCK
    NEW
  • LOGO 700 Motor Mount

    LOGO 700 Motor Mount

    LOGO 700 Motor mount

    SKU: MIK-05113
    €23.60
    inc. VAT

     72HR STOCK
  • Logo Dumper Set Medium Hard

    Logo Dumper Set Medium Hard

    Dumper rubber set medium hard

    SKU: MIK-2756
    €3.40
    inc. VAT

     72HR STOCK
  • LOGO Fusion 550 Fuselage Kit

    LOGO Fusion 550 Fuselage Kit

    LOGO Fusion 550 Fuselage Kit

    LOGO 550 Fusion is a fuselage kit for the LOGO 550 SX.
    It's sleek and streamlined design with the fluent passage between canopy and tail boom cover improve the speed flying capabilities of the 550.
    The improved visibility makes dynamic and big air flying even more fun.

    3D-flight is of course also possible with the LOGO Fusion.
    The light takeoff-weight beginning at approx. 7.5 pounds (equipped with 6s 5.000 mAh batteries) makes the machine very nimble.

    The tail boom cover slides onto the LOGO 550 SX mechanics and is bolted to the prepared mounting points on the V2 chassis. At the tail, it is held by additional clamps.
    All r/c components keep their place on the mechanics, they are well accessible when you remove the large canopy.
    The Fusion Fuselage Kit comes ready to mount, including a new tail fin and all the required small parts for the assembly, for the LOGO 550 SX mechanics.

    Please take note: this Fuselage Kit only fits the LOGO 550 SX.
    It will take considerable efforts to update other models of the LOGO 500 line.
    If in doubt, please consult the manual of your LOGO helicopter and the current manual of the LOGO 550 SX, to see what is different.

    SKU: MIK-05109
    €259.00
    inc. VAT

     72HR STOCK
  • Logo Sideframe stiffener right/left, LOGO 600/690

    Logo Sideframe stiffener right/left, LOGO 600/690

    Logo Sideframe stiffener right/left, LOGO 600/690

    SKU: MIK-4920
    €29.90
    inc. VAT

     IN STOCK
  • LOGO XXTreme 700 & 800 Blade holder with ball bearings

    LOGO XXTreme 700 & 800 Blade holder with ball bearings

     LOGO XXTreme 700 & 800 Blade holder with ball bearings, 1 PCs

    SKU: MIK-4700
    €47.00
    inc. VAT

     72HR STOCK
  • Lower Carbon Chassis Frame 1,5mm, LOGO 700 XXtreme

    Lower Carbon Chassis Frame 1,5mm, LOGO 700 XXtreme

    Lower Carbon Chassis Frame 1,5mm, LOGO 700 XXtreme

    SKU: MIK-4736
    €34.90
    inc. VAT

     72HR STOCK
  • Lower Carbon Chassis Frame, LOGO XXtreme 800

    Lower Carbon Chassis Frame, LOGO XXtreme 800

    Lower Carbon Chassis Frame, LOGO XXtreme 800
    SKU: MIK-4536
    €34.90
    inc. VAT

     72HR STOCK
  • Lower Frame Carbon Chassis, 1,0mm LOGO 700 XXtreme

    Lower Frame Carbon Chassis, 1,0mm LOGO 700 XXtreme

    Lower Frame Carbon Chassis, 1,0mm LOGO 700 XXtreme

    SKU: MIK-4741
    €33.90
    inc. VAT

     72HR STOCK
  • Lower frame stiffener 1mm, LOGO 700 XXtreme

    Lower frame stiffener 1mm, LOGO 700 XXtreme

     Lower frame stiffener 1mm, LOGO 700 XXtreme

    SKU: MIK-4773
    €18.90
    inc. VAT

  • Magnet Holder

    Magnet Holder

    Magnet holder

    SKU: MIK-2389
    €6.00
    inc. VAT

     IN STOCK
  • Main blade holder LOGO 400

    Main blade holder LOGO 400

    Main blade holder LOGO 400

    SKU: MIK-4262
    €4.90
    inc. VAT

     72HR STOCK
  • Main blade holder LOGO 550

    Main blade holder LOGO 550

    Main blade holder LOGO 550

    SKU: MIK-4263
    €5.90
    inc. VAT

     LOW STOCK
  • Main blade holder LOGO 600/700/800

    Main blade holder LOGO 600/700/800

    Main blade holder LOGO 600/700/800

    SKU: MIK-4264
    €4.90
    inc. VAT

     72HR STOCK

Manufacturers