Mikado Logo 700 XXTREME

Products


  • Lower Frame Carbon Chassis, 1,0mm LOGO 700 XXtreme

    Lower Frame Carbon Chassis, 1,0mm LOGO 700 XXtreme

    Lower Frame Carbon Chassis, 1,0mm LOGO 700 XXtreme

    SKU: MIK-4741
    €33.90
    inc. VAT

     72HR STOCK
  • Lower frame stiffener 1mm, LOGO 700 XXtreme

    Lower frame stiffener 1mm, LOGO 700 XXtreme

     Lower frame stiffener 1mm, LOGO 700 XXtreme

    SKU: MIK-4773
    €18.90
    inc. VAT

  • Main blade holder LOGO 600/700/800

    Main blade holder LOGO 600/700/800

    Main blade holder LOGO 600/700/800

    SKU: MIK-4264
    €4.90
    inc. VAT

     72HR STOCK
  • Main gear 175 teeth, LOGO XXtreme 700 & 800

    Main gear 175 teeth, LOGO XXtreme 700 & 800

    Main gear 175 teeth, modul 1, LOGO XXtreme 700 & 800

    SKU: MIK-4514
    €18.90
    inc. VAT

     LOW STOCK
  • Main pulley, LOGO XXtreme 700 & 800

    Main pulley, LOGO XXtreme 700 & 800

    Main pulley, LOGO XXtreme 700 & 800
    SKU: MIK-4515
    €14.50
    inc. VAT

     72HR STOCK
  • Main rotor shaft 240mm, LOGO XXTreme 700

    Main rotor shaft 240mm, LOGO XXTreme 700

    Main rotor shaft 240mm, LOGO XXTreme 700

    SKU: MIK-4711
    €19.90
    inc. VAT

     LOW STOCK
  • Middle stiffener plate 1mm, LOGO 700 XXtreme

    Middle stiffener plate 1mm, LOGO 700 XXtreme

     Middle stiffener plate 1mm, LOGO 700 XXtreme

    SKU: MIK-4774
    €13.90
    inc. VAT

     72HR STOCK
  • Motor Mounting Plate LOGO XXtreme 700 & 800

    Motor Mounting Plate LOGO XXtreme 700 & 800

    Motor Mounting Plate, LOGO XXtreme 700 & 800
    SKU: MIK-4544
    €19.90
    inc. VAT

     72HR STOCK
  • Mounting bolts Battery Plate LOGO XXtreme 700 & 800

    Mounting bolts Battery Plate LOGO XXtreme 700 & 800

    Mounting bolts Battery Plate for LOGO XXtreme 700 & 800
    SKU: MIK-4535
    €19.90
    inc. VAT

     72HR STOCK
  • O-ring set, Yoke main rotor head, LOGO XXTreme 700 & 800

    O-ring set, Yoke main rotor head, LOGO XXTreme 700 & 800

     O-ring set, Yoke main rotor head, LOGO XXTreme 700 & 800, 6 PCS

    SKU: MIK-4705
    €5.90
    inc. VAT

     LOW STOCK
  • O-ring spacer LOGO XXTreme 700 & 800

    O-ring spacer LOGO XXTreme 700 & 800

    O-ring spacer LOGO XXTreme 700 & 800

    SKU: MIK-4706
    €5.90
    inc. VAT

     72HR STOCK
  • O-Rings For Tail Rotor Hub, LOGO XXtreme 700 & 800

    O-Rings For Tail Rotor Hub, LOGO XXtreme 700 & 800

    O-Rings For Tail Rotor Hub, LOGO XXtreme 700 & 800
    SKU: MIK-4570
    €5.90
    inc. VAT

     72HR STOCK
  • One way hub, LOGO XXtreme 700 & 800

    One way hub, LOGO XXtreme 700 & 800

    One way hub, LOGO XXtreme 700 & 800

    SKU: MIK-4513
    €24.90
    inc. VAT

     72HR STOCK
  • Pin for Chassis gear box LOGO XXtreme 700 & 800

    Pin for Chassis gear box LOGO XXtreme 700 & 800

    Pin for Chassis gear box, LOGO XXtreme 700 & 800
    SKU: MIK-4520
    €3.90
    inc. VAT

     72HR STOCK
  • Pinion for herringbone gear 16teeth, M1, dia.8mm

    Pinion for herringbone gear 16teeth, M1, dia.8mm

    MIK-4716 Pinion for herringbone gear 16teeth, M1, dia.8mm

    For the Mikado logo Xxtreme 700 and 800

    SKU: MIK-4716
    €20.00
    inc. VAT

     72HR STOCK
  • Pinion for herringbone gear 18teeth, M1, dia.8mm

    Pinion for herringbone gear 18teeth, M1, dia.8mm

    Pinion for herringbone gear 18teeth, M1, dia.8mm

    For the Logo 700 / 800 Xxtreme-DISCONTINUED

    SKU: MIK-4489
    €20.00
    inc. VAT

     72HR STOCK
  • Pinion Herringbone gear 19teeth, M1, dia.8mm

    Pinion Herringbone gear 19teeth, M1, dia.8mm

    Pinion for herringbone gear 19teeth, M1, dia.8mm

    For the Logo 700 / 800 XXtreme

    SKU: MIK-4490
    €20.00
    inc. VAT

     LOW STOCK
  • Radius arm swashplate driver LOGO XXTreme 700 & 800

    Radius arm swashplate driver LOGO XXTreme 700 & 800

    Radius arm swashplate driver, LOGO XXTreme 700 & 800
    SKU: MIK-4509
    €6.90
    inc. VAT

     72HR STOCK
  • RC/ESC Mounting Frames 1,5mm LOGO 700 XXtreme

    RC/ESC Mounting Frames 1,5mm LOGO 700 XXtreme

    RC/ESC Mounting Frames 1,5mm LOGO 700 XXtreme

    SKU: MIK-4740
    €31.90
    inc. VAT

     72HR STOCK
  • RC/ESC Mounting Frames, 1mm, LOGO 700 XXtreme

    RC/ESC Mounting Frames, 1mm, LOGO 700 XXtreme

     RC/ESC Mounting Frames, 1mm, LOGO 700 XXtreme

    SKU: MIK-4745
    €31.00
    inc. VAT

     72HR STOCK
  • Rotor disk

    Rotor disk

    Rotor disk
    SKU: MIK-4049
    €9.90
    inc. VAT

     72HR STOCK
  • SAVÖX HIGH VOLTAGE BRUSHLESS DIGITAL TAIL SERVO 0.048/138.9 @7.4V

    SAVÖX HIGH VOLTAGE BRUSHLESS DIGITAL TAIL SERVO 0.048/138.9 @7.4V

    SAVÖX HIGH VOLTAGE BRUSHLESS DIGITAL TAIL SERVO 0.048/138.9 @7.4V

    The SB2283MG is an ultra high speed servo running at .048sec transit @ 7.4V.
    This servo is a great choice for your heli gyro.
    Combines leading edge technology with super high 12 bit (4096) resolution and titanium gears.
    Super light-weight.
    Brushless motor provides longer life and cooler operating temps.
    The aluminum case design not only looks good but also allows for cooler and smoother operating temps.
    Our servos are totally green - from materials to production, these servos are environmentally friendly.
    Intended for use in heli rudder applications only.

    Specification:

    • Dimensions(mm)     40.3 x 20.2 x 38.7
    • Weight(g):     69.0
    • Speed @6.0V:     .06sec
    • Torque@6.0V:     69.4 oz-in
    • Speed @ 7.4V:     .048sec
    • Torque @ 7.4V:     138.9 oz-in.
    • Gear Type:     Metal
    • Bearings:     2 BB
    • Frequency:     250-333Hz
    • Pulse Width Frequency:     1520>
    SKU: SB-2283MG
    €159.90
    inc. VAT

     LOW STOCK
  • SAVÖX SB-2271SG BRUSHLESS

    SAVÖX SB-2271SG BRUSHLESS

    SAVÖX SB-2271SG DIGITAL SERVO BRUSHLESS MOTOR HIGH VOLTAGE STEEL GEARS (STANDARD SIZE)

    Specifications Dimension :

    • Height: 38,5 mm Dimension :
    • Length: 40,3 mm Dimension :
    • Weight: 69 gr Dimension :
    • width: 20,2 mm
    • Speed: 0.085 sec / 60° @ 6,0v
    • Torque: 15.0 kg- cm @ 6,0v
    • Type of case: Aluminium + plastic
    • Type of gears: Steel gears
    • Type of motor: Brushless motor
    • Type of servo: Digital servo
    • Type of spine: 25 tooth spine
    SKU: SB-2271SG
    €119.00
    inc. VAT

     72HR STOCK
  • SAVÖX SB-2272MG BRUSHLESS

    SAVÖX SB-2272MG BRUSHLESS

    SAVÖX SB-2270SG DIGITAL SERVO BRUSHLESS MOTOR HIGH VOLTAGE METAL GEARS (STANDARD SIZE)

    Features:

    Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears.
    Super light-weight.
    Brushless motor provides extremely high speed, incredible efficiency, and amazingly low power consumption.
    The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
    Our servos are totally green – from materials to production, these servos are environmentally friendly.
    Ideal for Gyro and rudder servo only.

    Specifications:

    • Dimensions(mm): 40.3x20.2x38.5
    • Weight(g): 66.0
    • Speed(@4.8V sec/60): .055
    • Torque(@4.8V oz-in): 41.7
    • Speed(@6.0V sec/60): .045
    • Torque(@6.0V oz-in): 69.4
    • Speed(@7.4V sec/60): .032
    • Torque(@7.4V oz-in): 97.2
    • Gear: Metal
    • Bearing: 2BB
    • Case: Full Aluminum
    • 25 Tooth Spline
    • Frequency: 250-333hz
    SKU: SB-2272MG
    €119.00
    inc. VAT

     72HR STOCK

Manufacturers

Back