Lynx Heli

Description:

Lynx offer Colored Sticker Set for Oxy3 Helicopter Tail Boom Cover

Add more visibility and personalization to your loved Oxy 3.

Sticker is designed for the Stetch Oxy 3 Tail, self cut 25 mm for the standard 255 Tail

Packing List:

• 2 x Oxy3 - Tail Boom Colored Sticker Cover, Orange
   

Description:

Lynx offer Colored Sticker Set for Oxy3 Helicopter Tail Boom Cover

Add more visibility and personalization to your loved Oxy 3.

Sticker is designed for the Stetch Oxy 3 Tail, self cut 25 mm for the standard 255 Tail

Packing List:

• 2 x Oxy3 - Tail Boom Colored Sticker Cover, Yellow
   

Packing List:

• 1 x OXY3 - V1-V2 FBL Antirotation Arm, Service Bag

Description:

• Lynx offer a spare bag for Oxy3 Helicopter V1 and V2 Edition

Packing List:

• 1 x OXY3 - V1-V2  Pro Edition DFC Arm - Black, Set

 

Description:

• Lynx offer a spare bag for Oxy3 Helicopter V2 Edition

Packing List:

• 1 x OXY3 - V2 Main Grip Bushing, Spare

 

Lynx Heli Innovations has redesigned the 180CFX Canopy Pin using Aluminum 7075.
Lynx Canopy Pins have beautifully “fusion-shape” design and thread lock as system for fastening in the frame.
Small details make an important difference; FEA analysis software give us the support to determinate the best compromise between weight and stiffener, in order to assure the best fly performance without add any unnecessary weight.

FEATURES:

Optimized Pin terminal size for the best canopy support
Beautifully “fusion-shape” Lynx design
Pre Assembled Threaded rod for quick installation.
Direct replacement of standard 180CFX Canopy Pins.
FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.

TECHNICAL SPECIFICATION:

Canopy Pin Material: Aluminum 7075-T6 - Anodize
Threaded Rod Material: Carbon Steel
Assembly weight: 0.4g

PACKING LIST:

2 x 180CFX Aluminum Canopy Pin - Red

2 x Threated Rod Pre Installed

2 x Carbon Rod for easy installation

Lynx Heli Innovations T-REX 700 Ultra Dampeners LX0292

By combining our engineering and helicopter experience we have designed special dampers that hold the spindle and remove play.

To fly the T-Rex700 pushed to the limit without compromise requires special dampers designed without compromise.

Lynx Dampers are two piece - one O-ring to maintain the necessary preload (to remove side by side play) and one bushing in techno-polymer auto-lube to assure maximum load and friction resistance.

These dampers give your T-Rex 700 Heli an incredibly precise feel in the air. The difference is visible, particularly in fast forward flight and with quick pitch changes.

Our tests show that the Lynx dampers must be used at high head speeds, over 2300 RMP

Material:

• Techno-Polymer
• EPDM Rubber Compound (Elastomer)
• Packing list:
• 2 x T-Rex 700 Ultra Dampers – Bushing
• 2 x O-Ring Elastomer

Description: 2,2 X 61 FINE ADJ FBL ROD
Rod O.D. : 3
Total Length: 61
Thread Length: 8
Thread Info: 2,2 x 0,45
Package Info: 4 pcs
Lynx Rods for FBL Heli: Velocity 50/ Fusion 50/ Raptor 50
Note: Titanium G6

FEATURES:

Redesigned shape to increase strength were really need
FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.
Specifically design for advanced 3D pilot and intense 3d fly
High quality ABEC5 SST radial bearing for maximum precision and durability
Direct replacement for the standard 180CFX part
Preassembled with bonded and lubricated bearing.

TECHNICAL SPECIFICATION:

Bearing Block Material: Alu. 7075
Bearing material: SST – ABEC5 Precision Class - Japain
Assembly weight (set including hardware): 5.25g

Set includes:

1 x 180CFX Upper Bearing Block –  Red Color - Per assembled with Hardware per need.
1 x 180CFX Lower Bearing Block – Red Color - Per assembled with Hardware per need.

FEATURES:

Direct replacement for the standard 180CFX landing gear.
3 degree Tail lift assure more space and safe landign and take off.
CNC Landing gear support increase frame stiffener, with incredible hard landing resistance.
Replaceable landing skids available.
FEA (Final Elements Analysis) design assisted, resulting in lightweight and maximum strength.

TECHNICAL SPECIFICATIONS:

Landing Gear Support Materials: Aluminum 7075-T6 – anodized
Landing Gear Skids and Stiffeners Material: Carbon Fiber 0.8 mm thickness
Screw material: 12.9 Carbon steel
Weight Assembly: 4.25 g

PACKING LIST:

2 x 180CFX – CNC Landing Gear Support - Red
2 x 180CFX – Carbon Fiber Landing Gear Skids
4 x M1.6x4 Hex Cup Screw
4 x M1.6x4 Pan Head Screw – Self Tapping
4 x M1.6 “C” Washer Black.6x4 - Hex Socket 1.5