Lynx Heli

Lynx Heli

Lynx Heli Innovation,heli upgrades ! ... Lynx and Spher Clothes, in cobranding,Many different design

Products


  • 130 X - Head Main Grip

    130 X - Head Main Grip

    Lynx Heli Innovations has redesigned the standard 130 X plastic main grip, using aluminum alloy.
    Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.
    We spent hours optimizing the design to achieve the required strength with a final weight beyond compromise. We are pilots, and we demand a light helicopter.
    After many flights, we decided on a twin 5x2x2 radial bearing design. Simple, lightweight and durable.
    The linkage balls are aluminum to minimize weight.
    The details and design of these blade grips add to the performance of your helicopter.
    Strength, durability, accurate CNC tolerances, finish, and most important weight.
    Almost unbelievable, but this main grip set weighs just 1.3g heavier than the original plastics grips, with a huge increase in rigidity and strength.
    These grips increase flight precision, flight after flight.

    Packing list:

    2 x 130 X – CNC Main Grips
    4 x Radial bearing 5x2x2
    2 x Hex cap screw M2x8
    SKU: LX0288
    €28.50
    inc. VAT

     LOW STOCK
  • 130 X - Motor Heat Sink 130X

    130 X - Motor Heat Sink 130X

     Lynx Heli Innovations 130 X Motor Heat Sinks LX0321

     Lynx Heli Innovations is always looking for a better way of doing things.

    Lynx closely test the standard 130 X motor during 3d fly followed by intensive bench test to simulate and retrieve information of motor temperature and dissipation during the harder fly condition. Thanks cooperation with electronics and motor expert, Lynx was able determinate the perfect motor heat sinks for your 130 X standard motor.

    Small details make an important difference; Thermal Analysis software interfaced with FEA analysis software give us the support to determinate the best compromise between weight and thermal dissipation efficiently. Your 130 X standard motor will definitely run cooler and speed-up the recovery “low” temperature time between each multi-session fly.

    FEATURES:

    • Help motor to run cooler with general better performance.
    • Help to a fast “low” temperature recover between multi-session fly.
    • Low temperature motor running means more stable power and longer motor life.
    • Better motor efficacy and low temperature run will reduce risk of motor / esc motherboard electronics damage.
    • Unique and stylish Lynx design
    • Easy and quick installation thanks specific design
    • Thermal Analysis Software interfaced with FEA (Final Elements Analysis) assisted design  for the best compromise design, weigh, and thermal dissipation efficiently.

    TECHNICAL SPECIFICATION:

    Motor Heat Sinks Material: Aluminum 6061-T6  ,anodized finish

    1 x 130X CNC Motor Heat Sink

    TIPS AND ADVISES FOR BEST FUNCTION:

    Add smaller qty of lock thread (medium or strong resistance) in the motor heat sinks clamping surface, this will remove any gap of air between motor and heat sinks surface optimizing thermal exchange, will also easily firmly lock the heat sinks to the outside motor housing


    SKU: LX0321
    €9.90
    inc. VAT

     IN STOCK
  • 130 X -Head Center Hub

    130 X -Head Center Hub

    Lynx Heli Innovations has redesigned the standard 130 X plastic head center hub, using aluminum alloy.
    Two finish anodize color are available Silver and Red Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.
    We spent time optimizing the design and fly testing to achieve the required strength with a final weight beyond compromise.
    We are pilots, and we demand a light helicopter. Lynx head center hub is nice and weight only 1.2g only 0.1g heavier than plastic one. Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight, Lynx head center hub will increase and assure flight precision, flight after flight, adding top performance in your 130X.
    FEATURES: - Direct replacement for the standard 130 X part - Advanced main shaft locking system to assure solid and precise connection - Precise and accurate finish tolerances increase esthetics and fly performance - FEA (Final Elements Analysis) design assisted, achieve lightweight and maximum strength.

    TECHNICAL SPECIFICATION:
    • Center Hub Material: Aluminum 7075-T6 – anodized finish
    • Assembly weight: 1.2g
    PACKING LIST:
    • 1 x 130X CNC Head center hub
    • 2 x PAN head screw m1.6x6
    SKU: LX0338
    €22.00
    inc. VAT

     LOW STOCK
  • 130 X Ultra Landing Gear Profile 5

    130 X Ultra Landing Gear Profile 5

    Lynx Heli Innovations has redesigned the standard 130X landing gear using Carbon Fiber Skids and Plastic Polymer Skid Mount.

    This combination offer High-tech looking and lightweight parts. Large skids profiles are available to personalize your 130X looking.
    Micro helicopter upgrades can be a trap; often they look nice but do little for function, and only add weight.
    We spent time optimizing the design and fly testing to achieve the required strength with a final weight beyond compromise.
    We are pilots, and we demand a light helicopter.
    Lynx 130X Ultra Landing Gear the new frontier of lightweight and innovative design.

    FEATURES:

    • Carbon Fiber Skids and Plastic Polymer Skid Mount for the best compromise of High-tech design, straight and lightweight
    • Large skids profiles are available to personalize your 130X looking
    • Direct replacement of std plastic landing gear
    • Integrate 3in1 board plate support in the front Skid Mount.

    TECHNICAL SPECIFICATION:

    • Skids Material: Carbon Fiber 3K Black Color
    • Landing Gear Support: Plastic Polymer base Nylon + FB
    • Hardware: Chrome Steel
    • Assembly weight: 3.6 g

    PACKING LIST:

    • 2 x CF Skids
    • 2 x Plastic Landing Gear Support
    • 8 x M1.6x5 PAN Head Self Taping Screw
    SKU: LX0431
    €10.00
    inc. VAT

     LOW STOCK
  • 130X Ultraflex Landing Gear

    130X Ultraflex Landing Gear

    Lynx Heli Innovations propose an alternative to the standard 130X landing gear.
    Combining Nylon and Elastomer Polymer we create an ultra flex landing gear that will surprise for it resistance.
    This combination offer High-tech performance and lightweight landing gear.
    Micro helicopter upgrades can be a trap; often they look nice but do little for function, and only add weight.
    We spent time optimizing the design and fly testing to achieve the required strength with a final weight beyond compromise.
    We are pilots, and we demand a light helicopter.

    Lynx 130X Ultra Flex Landing Gear the new frontier of lightweight and innovative design.

     FEATURES:

    • Nylon 66 + Elastomer Polymer landing gear, super flexible and super resistant in case of hard landing or crash.
    • Aggressive and High-Tech profile design.
    • Direct replacement of std plastic landing gear
    • Integrate 3in1 board plate support in the front Skid Mount.

    TECHNICAL SPECIFICATION:

    • Landing Gear: Nylon 66 + Elastomer Polymer
    • Hardware: Chrome Steel
    • Assembly weight: 4.75 g

    PACKING LIST:

    • 1 x Plastic Landing Gear – COLOR might vary
    • 4 x M1.6×5 PAN Head Self Taping Screw
    SKU: LX0668A
    €6.00
    inc. VAT

     LOW STOCK
  • 4/6mm Spindle Shaft Wrench

    4/6mm Spindle Shaft Wrench

    Lynx Heli Innovations is always looking for a better way of doing things.

    Lynx design a series of One Way Wrench tools suitable for all different Spindle Shaft diameters. This tool is really usefully once in case of maintenance both sides of screws need removed. Lynx wrench is a combination of innovative design and high quality material.

    FEATURES:

    • Support and help Spindle Shaft screw assembly and disassemble
    • Easy and quick use thanks special Lynx ergonomics design.

    TECHNICAL SPECIFICATION:

    • Wrench Material: Aluminum 7075T6 – Silver Color anodized
    • One Way Bearing Material: Chrome Steel – Japan Made

    SKU: LX0170
    €22.99
    inc. VAT

     72HR STOCK
  • 8/10mm Spindle Shaft Wrench

    8/10mm Spindle Shaft Wrench

    Lynx Heli Innovations is always looking for a better way of doing things.

    Lynx design a series of One Way Wrench tools suitable for all different Spindle Shaft diameters. This tool is really usefully once in case of maintenance both sides of screws need removed. Lynx wrench is a combination of innovative design and high quality material


    FEATURES:

    • Support and help Spindle Shaft screw assembly and disassembly
    • Easy and quick use thanks special Lynx ergonomics design.


    TECHNICAL SPECIFICATION:

    • Wrench Material: Aluminum 7075T6 – Silver Color anodized
    • One Way Bearing Material: Chrome Steel – Japan Made
    SKU: LX0169
    €25.99
    inc. VAT

     72HR STOCK
  • Air Brushed Fiber Glass Canopy for Blade 180 CFX - LG Style - Color Schema 2

    Air Brushed Fiber Glass Canopy for Blade 180 CFX - LG Style - Color Schema 2

    Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.
    180CFX have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.
    Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.
    So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

    FEATURES:

    • Direct replacement for 180CFX canopy.
    • Newest canopy profile design and multiple options per profile design and paint color.
    • Automotive Quality paints and clear coats.
    • Professional air-brushed and finish quality
    • Incredible rapport quality / cost

    TECHNICAL SPECIFICATION:

    • Canopy base made by High quality Fiber Glass
    • An allergic and safe Automotive Quality paints and clear coats.
    • Weight: 11gr

    PACKING LIST:

    • 1 x 180CFX Fiber Glass air brush canopy – LG Style
    SKU: LX180CFX032
    €22.90
    inc. VAT

     IN STOCK
  • BLADE 130X Goblin Style Fiber Glass Canopy

    BLADE 130X Goblin Style Fiber Glass Canopy

    Air Brushed - Fiber Glass Canopy - Goblin Style

    Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.

    130X have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.

    Our intent is made your 130X look different but also fly great with a low weight canopy.

    Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.

    So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

    FEATURES:

    • Direct replacement for 130X canopy.
    • Newest canopy profile design and multiple options per profile design and paint color.
    • Automotive Quality paints and clear coats.
    • Professional air-brushed and finish quality
    • Incredible  quality / cost 

    TECHNICAL SPECIFICATION:

    • Canopy base made by High quality Fiber Glass
    • An allergic and safe Automotive Quality paints and clear coats.
    • Weight: 11gr

     

    SKU: LX130X043
    €22.00
    inc. VAT

     IN STOCK
  • BLADE 130X Goblin Style Fiber Glass Canopy

    BLADE 130X Goblin Style Fiber Glass Canopy

    Air Brushed - Fiber Glass Canopy - Goblin Style

    Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.

    130X have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.

    Our intent is made your 130X look different but also fly great with a low weight canopy.

    Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.

    So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

    FEATURES:

    • Direct replacement for 130X canopy.
    • Newest canopy profile design and multiple options per profile design and paint color.
    • Automotive Quality paints and clear coats.
    • Professional air-brushed and finish quality
    • Incredible  quality / cost 

    TECHNICAL SPECIFICATION:

    • Canopy base made by High quality Fiber Glass
    • An allergic and safe Automotive Quality paints and clear coats.
    • Weight: 11gr

     

    SKU: LX130X044
    €22.00
    inc. VAT

     IN STOCK
  • BLADE 130X Logo style Fiber Glass Canopy

    BLADE 130X Logo style Fiber Glass Canopy

    Lynx Heli Innovations Painted Fiber Glass Canopy 130X LX130X031

    Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.
    130X have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.
    Our intent is made your 130X look different but also fly great with a low weight canopy.
    Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.
    So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

    FEATURES:

    • Direct replacement for 130X canopy.
    • Newest canopy profile design and multiple options per profile design and paint color.
    • Automotive Quality paints and clear coats.
    • Professional air-brushed and finish quality
    • Incredible rapport quality / cost


    TECHNICAL SPECIFICATION:

    • Canopy base made by High quality Fiber Glass
    • An allergic and safe Automotive Quality paints and clear coats.
    • Weight: 11gr

    PACKING LIST:
    1 x 130X Fiber Glass air brush canopy – LG Style

    SKU: LX130X031
    €22.00
    inc. VAT

     IN STOCK
  • BLADE 130X TDR Style Fiber Glass Canopy

    BLADE 130X TDR Style Fiber Glass Canopy

    Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.
    130X have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.
    Our intent is made your 130X look different but also fly great with a low weight canopy.
    Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.
    So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

    FEATURES:

    • Direct replacement for 130X canopy.
    • Newest canopy profile design and multiple options per profile design and paint color.
    • Automotive Quality paints and clear coats.
    • Professional air-brushed and finish quality
    • Incredible rapport quality / cost 

    TECHNICAL SPECIFICATION:

    • Canopy base made by High quality Fiber Glass
    • An allergic and safe Automotive Quality paints and clear coats.
    • Weight: 11gr
    SKU: LX130X004
    €22.00
    inc. VAT

     IN STOCK
  • BLADE 130X TDR Style Fiber Glass Canopy

    BLADE 130X TDR Style Fiber Glass Canopy

    Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.
    130X have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.
    Our intent is made your 130X look different but also fly great with a low weight canopy.
    Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.
    So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

    FEATURES:

    • Direct replacement for 130X canopy.
    • Newest canopy profile design and multiple options per profile design and paint color.
    • Automotive Quality paints and clear coats.
    • Professional air-brushed and finish quality
    • Incredible rapport quality / cost 

    TECHNICAL SPECIFICATION:

    • Canopy base made by High quality Fiber Glass
    • An allergic and safe Automotive Quality paints and clear coats.
    • Weight: 11gr
    SKU: LX130X006
    €22.00
    inc. VAT

     IN STOCK
  • Blade 180CFX  Red Ultra Bottom Plate- from Lynx

    Blade 180CFX Red Ultra Bottom Plate- from Lynx

    FEATURES:

    Precision and higher tensile stretch increase parts durability.
    Direct replacement for the standard 180 CFX part.
    FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.

    TECHNICAL SPECIFICATION:

    Material: Aluminum 7075-T6 – Anodize
    Hardware Material: Carbon Steel
    Weight : 4.1g

    PACKING LIST:

    1 x 180CFX - Ultra Bottom Plate - Red
    10 x Hex Cup Screw M1.6x4 - Hex Socket 1.5

    SKU: LX1461
    €9.50
    inc. VAT

     LOW STOCK
  • CNC Carbon Steel Main Shaft BLADE 180CFX by Lynx heli

    CNC Carbon Steel Main Shaft BLADE 180CFX by Lynx heli

    Using the finest precision, high quality CNC finish, Lynx has produced our hardened carbon steel main shaft for the 180CFX.
    The choice to use C40 carbon steel heat-treated to 50 Rockwell Hardness was used to achieve the highest strength.  This Carbon Steel has been tested in our spindles and because of its added hardness it can withstand minor crashes without damage or bending.
    Lynx aims to fulfill all high performance needs for your 180CFX, without compromise, offering more choices to meet your preference:
    Carbon steel for highest strength/stiffness
    Carbon fiber for the ultimate lightweight
    Titanium for best ratio of strength and weight.

    FEATURES:

    • Precise tolerances eliminate vibrations and increase fine control feeling.
    • Direct replacement for standard 180CFX main shaft.
    • Final Elements Analysis used to achieve the lightest weight and maximum strength.

    SPECIFICATION

    • Shaft material: C40 Carbon Steel, heat-treated to 50 Rockwell Hardness.
    • Collar material: Stainless Steel
    • Assembly weight: 7g

    PACKING LIST:

    • 1 x 180CFX Carbon Steel Main Shaft
    • 1 x 180CFX Main Shaft Collar
    • 1 x Hex Cup Screw M1.6x5 Hex Socket 1.5
    • 1 x Hex Cup Screw M1.6x10 Hex Socket 1.5
    SKU: LX1394
    €9.70
    inc. VAT

     IN STOCK
  • CNC Carbon Steel Spindle shaft BLADE 180CFX by Lynx heli

    CNC Carbon Steel Spindle shaft BLADE 180CFX by Lynx heli

    Lynx Heli Innovations is always looking for a better way of doing things.
    Using the finest precision high quality CNC finish, Lynx has produced a Carbon Steel HRC 40 special edition spindle shaft for 180CFX.
    We chose Carbon Steel HRC 40 to achieve the best strength without any compromise.
    Lynx knows that 180CFX is a high performance helicopter, requiring some serious spindle shaft specifications.
    Small details make an important difference.
    This spindle shaft will be a perfect fit in your 180CFX.
    We sale the spindle in combo with Lynx 180CFX ultra dampeners to assure the best performance.

    TECHNICAL SPECIFICATION:

    • Bushing Material: Techno-Polymer base POM
    • Shims Washer: Brass
    • Spindle shaft material: Carbon Steel HRC 40
    • Hardware : Carbon Steel 12.9 Class DIN 912

    PACKING LIST:

    • 1 x 180CFX Carbon Steel spindle shaft
    • 2 x Washer 1.6x3.5x0.4
    • 2 x Hex Cup Screw M1.6x5 Hex socket M1.5
    • 2 x 180CFX Ultra Dampeners
    • 6 x Fine Adjustment Shims Washer
    SKU: LX1384
    €6.90
    inc. VAT

     IN STOCK
  • CNC Main Gear Set - Red Hub BLADE 180CFX by Lynx heli

    CNC Main Gear Set - Red Hub BLADE 180CFX by Lynx heli

    Lynx Heli Innovations redesign a 180CFX Main Gear Hub that supports Lynx CNC Main Gear.
    This option is dedicated to pilot who needs a super precise and reinforced CNC Main gear keeping the lightweight as possible and doesn’t need an autorotation system.
    Smooth power transmission and Heavy Duty specification will support your 180CFX need to next level.
    We spent time optimizing the design and fly testing to achieve the required strength and resistance with final design without compromise.
    We are pilots, and we demand a Heli that can support any over-stress fly condition.

    FEATURES:

    • Direct replacement of standard 180CFX main gear, useable with standard or upgraded main shaft.
    • Techno polymer Precise and reinforced CNC main gear assures best wear resistance and perfect tooth mesh.
    • Super precise Main gear concentricity for smooth and silent power transmission
    • Reinforced Main gear for the ultimate main gear rigidity and special cut design to increase crash impact resistance.
    • FEA (Finite Elements Analysis) assisted, achieve lightweight and maximum strength.

    TECHNICAL SPECIFICATION:

    • Main Gear Hub Material: Aluminum 7075-T6 Anodized
    • Main Gear Material: Techno polymer based POM

    PACKING LIST:

    1 x 180CFX CNC Main Gear assembled with Main Gear Hub Red

    SKU: LX1435
    €20.99
    inc. VAT

     IN STOCK
  • CNC Tail Shaft Assembly BLADE 180CFX by Lynx heli

    CNC Tail Shaft Assembly BLADE 180CFX by Lynx heli

    Lynx Heli Innovations has redesigned the standard 180CFX tail shaft and tail hub.

    FEATURES:

    • Direct replacement for the standard 180CFX.
    • Special carbon steel with high tensile stretch characteristics increases stiffener and reduces in flight bending
    • Special hub diameter increases the bonding surface and gives better alignment for geometrical shaft position.
    • Innovative and stable shaft / hub assembly with bonding and set screw for the ultimate assembly precision.
    • Precise shaft finish and tolerance assures shaft surface longevity and precise bearing fit.
    • Reduced vibration and increased tail system performance
    • FEA (Final Elements Analysis) assisted design, to achieve the lightest weight with maximum strength.

    TECHNICAL SPECIFICATIONS:

    Tail shaft and tail hub material: Special carbon steel – high tensile stretch

    Assembled weight: 1.5g

    PACKING LIST:

    1 x 180CFX – Tail shaft, factory assembled, with necessary hardware.

    SKU: LX1442
    €9.20
    inc. VAT

  • CNC Ultra Tail gearbox case Blade 180 CFX- Red from Lynx heli

    CNC Ultra Tail gearbox case Blade 180 CFX- Red from Lynx heli

    Lynx Heli Innovations has redesigned the standard 180CFX plastic tail case, using aluminum alloy.

    Helicopter upgrades can be a trap – often they look nice but do little for function.  Weight is of course critical.  In particular, helicopter tail components are important were small weight differences can make a huge difference to final flight performance.

    We spent hours optimizing the design to achieve the required strength with a final weight beyond compromise. We are pilots, and we expect top performance from our upgrades.

    Our tail case housing is made by one single piece of aluminum assuring the best geometrical tolerance and increase crash resistance.

    We "open" the back Tail Case side to help gear replacement and we support a first ever special shim washer adjustement system, that once installed on the outside shaft lock system will remove the well knowed side way shaft play.

    User manual show in detail the way to assembly and the shim features.

    FEATURES:

    • Direct replacements for the standard 180CFX.
    • Reduced vibration and increased tail system performance.
    • Help Gear replacement
    • First ever, side way shaft play with easy to install shim system.
    • FEA (Final Elements Analysis) assisted design, to achieve the lightest weight with maximum strength.

    TECHNICAL SPECIFICATIONS:

    • Tail Case material: Aluminum 7075-T6 – Red color
    • Bearing material: SST – ABEC5
    • Screw material: Carbon steel
    • Weight: 5.75g

    PACKING LIST:

    1 x 180CFX Ultra Tail Case Red pre-assembly

    SKU: LX1431
    €27.90
    inc. VAT

  • Cyclic Standard Size Servo Support

    Cyclic Standard Size Servo Support


    Lynx Heli Innovations we are 3D pilots and we fly the same helicopters as you.

    Goblin 500 comes with cyclic mini servo. Lynx has redesigned the standard Goblin 500 servo support giving the option to install Standard size servo.

    The main reason of this upgrade is to allow you to install stronger, faster and more precise servo using the classic servo size normally used in bigger class heli.

    Lynx made this simple design different! The vertical STD servo support plates are made by 3K Carbon OEM in Lynx factory and the servo tabs are just innovative per design and function.

    Lynx servo tab have M2.5 thread holes, this design don’t need any nuts. You will be amazed by the easy, quick and absolute solid installation.

     The best STD servo support for you Goblin 500.

     FEATURES:

    • Possibility to use STD servo size to achieve better cyclic response and resolution
    • Lynx CNC servo tab with built-in M2.5 thread for the quick and stronger installation
    • FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.

    TECHNICAL SPECIFICATION:

    • Servo Support Material: Carbon 3K – 3mm thickness
    • Servo Tab Material: Aluminum 7075-T6 – clear – Silver (Red) -  anodized finish
    • Hardware Material: Carbon Steel
    •  Assembly weight: 18.20 g

    PACKING LIST:

    • 3 x STD servo Carbon Fiber plate
    •  6 x Servo Tabs
    •  12 x Hex Cup Screw M2.5x8

    SKU: LX0497
    €26.00
    inc. VAT

     LOW STOCK
  • Double Ball Bearing Tail Pitch Slider Assembly

    Double Ball Bearing Tail Pitch Slider Assembly

     Lynx Heli Innovations has redesigned the standard 130 X plastic tail pitch slider, using a combination of aluminum alloy and low friction brass alloy.

    Two finish anodize color are available Silver and Red
    Tail pitch slider is one of the most critical components in any helicopter tails, in order to assure the best performance; lightweight and accurate precision of the bearing and slide bushing was our focus during the design.
    After intensive test, Lynx define the rotation system with double radial bearing and for the slide bushing we used a particular alloy material Brass based, specifically design for low friction bushing application.
    Tail pitch slider factory assembly is supported with dedicated equipment and expert human attentions to assure maximum quality and repeatability.
    Details and design, strength, durability, accurate CNC tolerances, finish, and most important lightweight, will increase and assure tail response and precision, flight after flight, adding top performance in your 130X.

    FEATURES:

    • Direct replacement for the standard 130 X tail part
    • Preassembled with lubricated bearing
    • Included two pins diameter 0.7mm, length 3.5 mm for the correct assembly
    • FEA (Final Elements Analysis) design assisted, achieve lightweight and maximum strength.


    TECHNICAL SPECIFICATION:

    • Main Body Material: Aluminum 7075-T6 – RED color anodized finish
    • Bearing Material: SST –ABEC5 Precision Class
    • Slide Bushing Material: Low Friction Brass alloy
    • Tail Pins Material: SST
    • Assembly weight: 0.6g


    PACKING LIST:

    • 1 x 130X CNC Tail Pitch Slider factory assembly
    • 2 x Tail Pins 0.7x3.5 mm
    SKU: LX0360
    €16.50
    inc. VAT

     LOW STOCK
  • Frame Washer M3 - Silver -20pcs

    Frame Washer M3 - Silver -20pcs

    Used for:  M3 Frame Screw

    Material: High Precision Tolerance CNC Part made with Aluminum 7075T6

    Include:

    • 20 x Frame C Washer M3 – Silver
    SKU: LX0237
    €5.50
    inc. VAT

  • HD Tail Boom Supports T-REX700 Series

    HD Tail Boom Supports T-REX700 Series

    Lynx Heli Innovations T-REX700 Series HD Tail Boom Supports LX0265

    LX0265 is design for T-Rex 700 Electric and Nitro Helicopters

    Lynx Heli Innovations is always looking for a better way of doing things.

    The boom supports are stressed very hard during flight. With vibrations form the tail drive system and tail loads during 3D flight, the standard boom supports are a weak point on the helicopter.

    Lynx tested many systems of construction for these boom supports to ensure they were the best possible. The final solution from Lynx is a combination of high quality materials and different mechanical fixation at the ends.

    Lynx has produced a solid 6mm diameter “high pressure” (molded at several atmospheres) carbon rod that is potted with high quality epoxy into strong aluminum 7075 terminals, and then everything clamped using a M2.5mm hex cap screw.

    The combination of epoxy and clamping make the lynx boom brace durable without compromise.

    Specifications:

    • Rod material: Solid 6mm diameter “high pressure” carbon rod – a process of production that increases carbon fiber cohesion and strength
    • Terminal material: Aluminum 7075-T6
    • Terminal installation holes: 4mm
    • Screw material: Carbon steel class 12.9
    • Assembly weight: 68.76g - 2pcs


    Contains:

    • 2 x boom support assemblies
    SKU: LX0265
    €32.99
    inc. VAT

     72HR STOCK
  • Head Center Hub with Carbon Main Shaft

    Head Center Hub with Carbon Main Shaft

    LX0340  NANO CPX  Head Center Hub Silver with Lynx Carbon Main Shaft Combo    


    Lynx Heli Innovations has redesigned the standard Nano CPX plastic Head Center Hub, using aluminum alloy, and we combo with Carbon Lynx Main Shaft.

    This micro part assembly will add precision and shock resistance to your Nano CPX heli.

    Why Lynx sale the Head Center Hub in combo with the main shaft??

    During out intensive design test we immediately discovery a weak and dangerous point once Aluminum CNC center Hub are installed into standard Nano CPX main shaft.

    Standard main shaft is designed to fit into plastic hub and have two parallel slots that fit and lock the rotation in the plastic hub. Those surfaces are NOT designed to fit in the CNC center hub and can compromise the assembly lock with risk of dangerous center hub infly disassembly.

    For us security first and we design a special shaft for CNC center hub.

    Lynx shaft is specifically designed for Lynx Head Center Hub and have special slot that assure the clamp and the perfect lock assembly. Pictures below had shown the difference between Lynx special shaft and standard main shaft slots.

    Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.

    We spent time optimizing the design and fly testing to achieve the required strength with a final weight beyond compromise. We are pilots, and we demand a light helicopter.

    Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight, will increase and assure flight precision, flight after flight, adding top performance in your Nano.

    Lynx Nano upgrade design the new frontier of lightweight and high precision upgrade parts for sub micro helicopters.

    FEATURES:

    • Precision and higher tensile stretch increase fly precision and parts durability
    • Direct replacement for the standard Nano part
    • Lynx shaft specially designed for CNC Center Hub clamp and best assembly lock.
    • Special set combo Head Center Hub with Main Shaft for the best infly user security.
    • FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.


    TECHNICAL SPECIFICATION:

    • Head Center Hub Material: Aluminum 7075T6 – Silver anodized finish
    • Main Shaft material: “High pressure” carbon rod – a process of production that increases carbon fiber cohesion and strength
    • Main Shaft Collar Material: Aluminum 7075T6 – Silver anodized finish
    • Hardware Material: Carbon Steel
    • Assembly weight: (Head Center Hub Assy: 0.41g + Main shaft Assy 0.28g ) – Tot.: 0.69g


    PACKING LIST:

    • 1 x Nano CPX CNC Head Center Hub – Silver anodize
    • 1 x Nano CPX Lynx Main Shaft Carbon with Collar assembled
    • 3 x Pan Head screw M1.4x3 (2 assembled + 1 as spare part)
    SKU: LX0340
    €15.99
    inc. VAT

     IN STOCK

Manufacturers