LED & Lights

Products


  • Night Flying Glowsheet Kit

    Night Flying Glowsheet Kit

    Great for making your own lighted signs. Sheet comes as Square of 10x10cm , or Round shaped diameter of 8cm.
    Kit comes with 6-12 volt driver . Best is to connect  Small lipo 2-3 cells, or attach to Balancer of large lipo and use 2-3s from this source.
    You can attach the sheet to  Drone, heli, or on the boom and fly in the dark.
    Alternatively, Print your name, stick on the sheet and it will glow in the dark,
    turn on and you have a beautiful lighted sign!

     
    Pictures of the shapes can be seen in Detailed images.

    One driver can feed up to 3 sheets.
    Set include 1 Glowsheet and one Driver
    SKU: RCM20453
    €13.00
    inc. VAT

     IN STOCK
  • Night Flying set

    Night Flying set

    Complete set includes two (2) Hi-Lum contrasting glow wires of 1 meter long, and Double glow wire Driver.
    All connectors are pre installed , just add your small lipo 2s 300-1000mh


    That all you need, and it's ready to fly.
    The dual controllers increase brightness significantly.

    SKU: RCM15544
    €35.00
    inc. VAT

     IN STOCK
  • Night Wire ( EL-wire ) made in europe!

    Night Wire ( EL-wire ) made in europe!

    High-intensity light wire that glows strong at night.

    The driver ( a tiny black box ) can power up to three light wires each measuring at 1-2 meter long and can run for about 4 hours on a battery, recommended to use 2-3s Lithium.
    The Cool lights produces no heat and very flexible and bendable so you can wrap it over the Helicopters boom, canopy and other surfaces.
    Shake proof, impact proof and very versatile each install cold wire produces no electromagnetic wave so it will not interfere with the Helicopter’s receiver signals which is very important.

    Our Night Wires are especially produced for Military Night Flying, and used on many UAV's and other applications where most of reliability needed.
    Those Wires are produced in Europe, and producing 25% more illumination compared to their competitors. And all this without extra consumption of power. very high efficiency
    Thicknesses of 2.5mm, flexible and 1 meters Long.
    You will need converter(Driver) and Battery 7.4-12v.

    SKU: NIGHT1MBM
    €5.00
    inc. VAT

     IN STOCK
  • Night Wire driver

    Night Wire driver

    Driver box from 7-12v . up to 3 Night Wires can be connected to this box, providing you with the best lumination for night flying.
    This driver comes with 2 connectors for wires.
    Small size 27 x 28 x 27 mm and lightweight - less then 10 grams make this driver a perfect solution for Night flying.

    Connect 2- 3s lipo/Li-on, or 9V battery and you have Hours of continious night flying. 80ma consumtion only.

    SKU: SKU14206
    €10.00
    inc. VAT

     IN STOCK
  • Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    • Used for a drone
    • Suit for a tube which dia is 15-30mm
    • Waterproof and 3 working modes
    • 2x2032 battery
    • Product weight:22g
    • Cool design suit for riding at night
    Material:

    • 100% nature friendly grade silicone,non-toxic
    • RED Aluminum anodized

    SKU: ALULED-017
    €12.00
    inc. VAT

     IN STOCK
  • Quad Cool Red LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    Quad Cool Red LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    • Housing Color: Red, Light color- Red
    • Material    Aluminum Alloy + Plastic
    Construction:

    • Water Resistant    Yes
    • Electronic Components
    • Output Current    60 mA
    • Flashlights
    • Flashlight Modes :2, Hi > Strobe
    • Switch Type    Forward Click
    Power & Batteries:
    • Batteries Included    Yes
    • Battery Form Factor    CR2032
    • Estimated Usage Time  3-6 hours
    Dimensions:
    • Depth    34.6 mm
    • Height    112 mm
    • Width    27.6 mm
    • Product Weight    28 g
    SKU: ALULED-016R
    €9.00
    inc. VAT

  • Quad Cool White LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    Quad Cool White LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    • Housing Color:black, Light color- White
    • Material    Aluminum Alloy + Plastic
    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    Construction:

    • Water Resistant    Yes
    • Electronic Components
    • Output Current    60 mA
    • Flashlights
    • Flashlight Modes    Hi > Strobe
    • Mode Count    2
    • Mode Memory    No
    • Switch Placement    Head
    • Switch Type    Forward Clicky
    Power & Batteries:

    • Batteries Included    Yes
    • Battery Form Factor    CR2032
    • Estimated Usage Time    3-6 hours
    Dimensions
    • Depth    34.6 mm
    • Height    112 mm
    • Width    27.6 mm
    • Product Weight    28 g
    SKU: ALULED-016
    €9.00
    inc. VAT

     IN STOCK
  • Quad-Heli Front Led Light round BLACK (1pc)

    Quad-Heli Front Led Light round BLACK (1pc)

    This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
    Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

    Light Color: Red
    Case : Silicone red
    2 modes: Flash, Constant light
    Light visible till 300 Meters
    Power supply: 2x CR2032 per light (incl.)
    Weight: ±20g/light

    SKU: LEDLIGHTROUND-BLK
    €8.00
    inc. VAT

     IN STOCK
  • Quad-Heli Front Led Light round RED (1pc)

    Quad-Heli Front Led Light round RED (1pc)

    This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
    Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

    Light Color: Red
    Case : Silicone red
    2 modes: Flash, Constant light
    Light visible till 300 Meters
    Power supply: 2x CR2032 per light (incl.)
    Weight: ±20g/light

    SKU: LEDLIGHTROUND-RED
    €8.00
    inc. VAT

     IN STOCK
  • RGB LED Board 5050 12V for FPV Multicopters ,Drones, Planes, Helis

    RGB LED Board 5050 12V for FPV Multicopters ,Drones, Planes, Helis

    RGB LED Board  comes with three RGB LEDS. Seven colors are selectable by different combination of dip switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

    Specifications:

    •      INPUT: 10~13V DC
    •      Size: 47x10mm
    •      Weight: 2g
    •      Packing:  LED BOARD 1pc, Double side sticker

    Notes:

    •     Easy to Solder
    •     Be aware of the positive and negative poles, as well as the insulation;
    •     Switch the related codes to ON, seven colors are selectable;
    •     The input is in a range of 10~13V DC, can be powered by 3S Lipo or 12V BEC.

    Selectable Colors:

        B ON =Blue, 0.35W, 0.03A
        R ON =Red, 0.35W, 0.03A
        G ON =Green, 0.35W, 0.03A
        B+R =Megenta, 0.70W, 0.06A
        B+G =Cyan, 0.70W, 0.06A
        R+G =Yellow, 0.70W, 0.06A
        B+R+G =White, 1.05W, 0.09A

    SKU: RGB-5050-12V
    €4.50
    inc. VAT

     IN STOCK
  • RGB LED Board 5050 14-17V for FPV Multicopters ,Drones, Planes, Helis

    RGB LED Board 5050 14-17V for FPV Multicopters ,Drones, Planes, Helis

    RGB LED Board  comes with three RGB LEDS. Seven colors are selectable by different combination of dip switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

    Specifications:

    •      INPUT: 14~17V DC
    •      Size: 47x10mm
    •      Weight: 2g
    •      Packing:  LED BOARD 1pc, Double side sticker

    Notes:

    •     Easy to Solder
    •     Be aware of the positive and negative poles, as well as the insulation;
    •     Switch the related codes to ON, seven colors are selectable;
    •     The input is in a range of 10~13V DC, can be powered by 3S Lipo or 12V BEC.

    Selectable Colors:

        B ON =Blue, 0.35W, 0.03A
        R ON =Red, 0.35W, 0.03A
        G ON =Green, 0.35W, 0.03A
        B+R =Megenta, 0.70W, 0.06A
        B+G =Cyan, 0.70W, 0.06A
        R+G =Yellow, 0.70W, 0.06A
        B+R+G =White, 1.05W, 0.09A

    SKU: RGB-5050-16V
    €4.50
    inc. VAT

     IN STOCK
  • Tail Light WS2812B w/ Loud Buzzer

    Tail Light WS2812B w/ Loud Buzzer

    Matek Tail Light WS2812B with Loud Buzzer Dual Modes for FPV Racer Multicopters

    Designed as an H-Type tail light with 8xWS2812B LEDs and Loud Buzzer.
    When used, the WS2812B LEDs can show the flight control lock / unlock, about ailerons, brakes, throttle, alarm and other status.

    This product provides dual control modes, it can be controlled either by flight controlling firmwares (Cleanflight, Betaflight,etc.) or by Transmiter.


    Specification:

    • Brand name: Matek
    • Item name: LED Tail light with Buzzer board
    • Dual modes: FC control & TX control
    • TX mode: LED 7 colors (White, Red, Green, Blue, Yellow, Magenta, Cyan) LED 5 status (Constant light, Slow blink, Fast blink, Voilent blink)
    • Buzzer: Lost Plane Finder
    • FC mode: support Naze32, SPRacingF3, etc. with CleanFlight or Betaflight firmware
    • Input voltage range: 4.5~5.2V DC
    • Power of TX mode (5V IN ): 1W/0.2A~2W/0.4A Size & mounting: Pls check the Layout
    • Weight: 5g

    Package Includes:
    1 X LED Tail light with Buzzer board

     

     

    SKU: 2812-BH
    €7.50
    inc. VAT

     IN STOCK
  • Waterproof LED Strip 60 leds/meter

    Waterproof LED Strip 60 leds/meter

    Silicon Tube IP67 Flexible LED Strip 1 METER, 60leds/meter 5050 Waterproof LED
    Choice of colors: Red, Yellow, Green, Blue, White
    Easy to glue, flexible, weather Proof

    Description:

    •   Silicone tube encased waterproof IP67
    •   5050 SMD LED as the light source
    •   High Brightness, All single color
    •   High luminance efficient and low power consumption
    •   Easy Installation, 3M self adhesive tape in backside
    •   The flexible LED strip can be divided by every three leds
    •   Long Life over 50, 000 hours of usable life
    •   CE RoHS compliant
    •   With 2~3 Year Warranty

    Specifications:

    •   Dimension: 1 meter, 8mm wide
    •   LED Chip:  5050 SMD TOP LED
    •   LED Quantity: 60pcs/meter
    •   Material: FPC + Silicone
    •   Beam Angle: >120°
    •   Working Voltage: DC11V - DC24V
    •   Rated Power: 14.4W/m
    SKU: WTPwhite
    €9.00
    inc. VAT

     IN STOCK

Manufacturers

Back