KK2.1.5 Multi-rotor Flight Control Board With LCD, 6050MPU, Atmel 644PA

KK2.1.5 Multi-rotor Flight Control Board With LCD, 6050MPU, Atmel 644PA


 
(0 reviews)  


SKU
KK2.1.5
Manufacturer
Availability
OUT OF STOCK
Your Price
27.90
inc. VAT

Notify me when back in stock


Price Match


Price Match

KK2.1.5 Multi-rotor Flight Control Board With LCD, 6050MPU, Atmel 644PA

Description

The latest revision of this popular flight controller has arrived! Version 2.1.5 has updated sensors, more memory and safety enhancements including polarity protection and better pin labelling.

The KK 2.1.5 board brings easy multi-rotor flight to beginners and experts alike. The LCD screen and user-friendly software can be fully configured on the board itself instead of having to use a PC based configuration tool. Just select your multi-rotor type and motor layout, calibrate the ESCs and radio and off you go. Just follow the prompts on the LCD screen.

The board now uses the 6050MPU inertial measurement unit, containing a high precision gyro and accelerometer, so the KK 2.1.5 board now comes with an auto-level function. The Atmel Mega644PA 8-bit AVR RISC-based microcontroller has 64k of memory. The voltage detection header now also features polarity detection. Also included in the package is a piezo buzzer to provide audio feedback and warnings when arming or disarming the board.

Specifications:

  • Size: 50.5mm x 50.5mm x 12mm
  • Weight: 21 gram (Include Piezo buzzer)
  • IC: Atmega644 PA
  • Gyro/Acc: 6050MPU InvenSense Inc.
  • Auto-level: Yes
  • Input Voltage: 4.8-6.0V
  • AVR interface: standard 6 pin.
  • Signal from Receiver: 1520us (5 channels)
  • Signal to ESC: 1520us

Features:

1. Based on the original design, but improved with the convenience to connect to a satellite or S.Bus receiver directly, bypassing the requirement of adapter as normal KK board.
2. Engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.
3. The LCD screen and built in software makes install and setup easier than ever.
4. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go!

What is a Multi-Rotor Control board you ask?
The KK2 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.
The KK2 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).

  • Related Products

  • Reviews

  • Cant Find a Product?

  • Send to Friend


  Product Price Buy
Here+V2 RTK GNSS (M8P)

Here+V2 RTK GNSS (M8P)

SKU: HX4-06067

€660.00
 LOW STOCK
Spedix CC3D Flight Controller

Spedix CC3D Flight Controller

SKU: SPX71004

€19.90
 LOW STOCK
The Cube Kore (Without Cube)

The Cube Kore (Without Cube)

SKU: HX4-06038

€220.00
 LOW STOCK
RJX Brushed F3 EVO Flight Control Board

RJX Brushed F3 EVO Flight Control Board

SKU: RJX1309

€22.90 OUT OF STOCK
Bluetooth Module CRIUS MWC Multiwi, Naze Bluetooth / Parameter Debugging Module w/ Dual Chips

Bluetooth Module CRIUS MWC Multiwi, Naze Bluetooth / Parameter Debugging Module w/ Dual Chips

SKU: MWC-BT

€13.00
 IN STOCK
 Damper Mount for CC3D Flight Controller

Damper Mount for CC3D Flight Controller

SKU: CC3D-DAMPER

€3.50 OUT OF STOCK
KK-Mini 2.1.5 Multi-Rotor Flight Control Board with LCD screen

KK-Mini 2.1.5 Multi-Rotor Flight Control Board with LCD screen

SKU: KK215MINI

€26.90
 LOW STOCK
KingKong PIKO BLX Micro F3 Flight Controller 20x20mm

KingKong PIKO BLX Micro F3 Flight Controller 20x20mm

SKU: KK-T-FC

€19.90 OUT OF STOCK
Vector FPV Controller with LEADS

Vector FPV Controller with LEADS

SKU: VEC-PKG-LEADS

€279.90
 72HR STOCK
CC3D cable set

CC3D cable set

SKU: CableCC3D

€2.50
 IN STOCK

More...

There have been no reviews


Can't find what you looking for?

At eRCMarket we take pride in listening to the needs of our customer, and supplying products they want.
Custom project, Just for hobby ? Ask our engineers: We have the Answer !
We know each product we sell, and our providers have much more, so definitely we will help you.

: *
: *
: *
Type the characters you see in the picture:


*

Manufacturers