Producer of Blade helicopters, Hangar 9, Parkzone
JR Transmitter Neck Strap, fit all radios
Original JR single-point neckstrap, orange. Width approx 30 mm.
Main Blade Grips w/Bearings: nCP X/CP S
BLH3214 Main Blade Grip Set With Hardware
Blade MSRX Parts
Main Blade Grips with Bearings: mCP X
Main rotor blade set (green) Blade 230s
BLH3216 Main Rotor Blades Red With Hardware Blade MSRX Parts
Main Rotor Hub w/hardware: Blade nCP X/CP S
Motor with Wire, Clockwise Rotation Nano QX
Motor with Wire, Counter-Clockwise Rotation Nano QX
Coreless Main Motor with/Pinion: BMSR
ParkZone VisionAire BNF with AS3X Technology
The ParkZone VisionAire park flyer is specifically designed for sport pilots by 3D pioneer Quique Somenzini.
Its wings are constructed of hollow Z-Foam™ material that has been reinforced with carbon fiber to create structures that are stiffer and lighter than solid foam.
This rigid, lightweight airframe is paired with a powerful 10-size, 1250Kv brushless motor that delivers the vertical performance you need for an exhilarating 3D flying experience.
What makes the VisionAire model such a great 3D plane for sport pilots is the advanced AS3X (Artificial Stabilization – 3-aXis) System built into its AR635 receiver.
The AS3X System works behind the scenes to counter the effects of wind and turbulence, using 3-axis sensing and flight control software tuned by Quique Somenzini.
If you’ve never flown 3D before, this enhanced stability will give you the confidence you need to try high alpha maneuvers like harriers, hovers, torque rolls and more.
You can adjust the amount of stability the AS3X System provides or turn it off completely, but even 3D pros will find flying with it on feels completely natural.
There are no delays in control response or limits on the control throws. You’ll simply feel like you’re flying an expertly-tuned model that goes right where you point it.
Spektrum™ AR635 DSMX receiver with AS3X System, installed
Powerful 10-size BL outrunner, 1250Kv, installed
E-flite 40A Lite Pro Switch-Mode BEC brushless ESC (V2), installed
E-flite 13-gram digital micro servos, installed
Clear belly window for monitoring AS3X System status
Carbon-reinforced Z-Foam™ construction
Leading-edge vortex generators
Double-beveled hinges for large control surface throws
Durable wire landing gear and large wheels for flying off grass
Two-piece wing for easy transportation and repair
Sharp Mirco Pecorari signature trim scheme
Includes 3S 2200mAh 25C Li-Po battery
Includes 2- to 3-cell DC variable rate charger
Requires a full-range 4+ channel DSM2/DSMX aircraft transmitter, sold separately
Needed To Complete
- A 4+ channel full-range DSM2- or DSMX-compatible transmitter.
Wingspan: 45.0 in (1143mm)
Overall Length: 42.5 in (1088mm)
Wing Area: 539 sq in (34.8 sq dm)
Flying Weight: 43.7 oz (1240 g)
Motor Size: 10-size BL10 brushless outrunner, 1250Kv (installed)
Radio: AR635 6-channel DSMX AS3X sport receiver (installed)
Servos: (4) 13 g digital high-speed servos (installed)
Complete Precision Swashplate: Blade nCP X/CP S
Prop Set For Nano QX 2 FPV
This set includes (1) "A" and (1) "B" propeller.
Replacement Servo Mechanics: 2.3-Gram 2030L (Blade nCP X/CP S)
Rotor Head Linkage Set (8): mCP X
BLH3215 Rotor Head Linkages Blade MSRX Parts
Servo arms with linkage balls Blade 230s
BLH3208 Servo Pushrod Set
Blade MSRX Parts
Servo Pushrod Set with ball link: 3pcs: mCP X
Smart Phone Holder: mLP TX
Spektrum RX for Chroma
Spindle Tool Set: Blade nCP X/CP S
Needed To Complete
SAFE Technology for Advanced Aerobatics
Copyright © 2000-2020 eRCMarket. All Rights Reserved.