OXY2 HELI

Products


  •  OXY2-FE Tail Shaft 15T

    OXY2-FE Tail Shaft 15T

    Description:

    OXY2-FE Tail Shaft 15T

    Packing List:

    • 1 x OXY2-FE - Tail Shaft 15T

    NOTE: Advised for head speed below 4500RPM

    SKU: SP-OXY2-029
    €8.99
    inc. VAT

     LOW STOCK
  • Lynx Heli  Motor 2214-4100KV ESC,and 4 pc Servos KST DS215MG-V3 Combo

    Lynx Heli Motor 2214-4100KV ESC,and 4 pc Servos KST DS215MG-V3 Combo

    Description:

    Lynx Heli EOX 2214-4100KV Motor , ESC 40A-V1 and 4 pc Servos KST DS215MG-V3 Combo for Oxy heli

    SKU: ECOXY3-003
    €166.50
    inc. VAT

  • Lynx Servo DS-895-HV Aluminum CNC Case - 1PC Set

    Lynx Servo DS-895-HV Aluminum CNC Case - 1PC Set

    Lynx Heli Innovations introduce the first Metal Case Servo for 180 CFX.

    Using the Lynx LX9004 - Lynx Servo DS-895-HV, we build a special Cover and Rear Case in order to increase global Servo performance.

    After many pilot report and crash we decided to improve the standard Lynx DS-895-HV Servo with precision CNC Servo Cover and Rear Case.

    With this Metal Case, servo become more precise and robust in case of crash, gear mesh become very precise and cannot move as can upend on plastic case for wear or crash shock.

    The other important feature is the incredible heat-sink effect of CNC Rear Cover. Thanks a special design the motor case is in direct connection with Rear Cover keeping the motor temperature under dangerous values, increasing the global performance and the spam-life.

    Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight and features, this Servo Case will increase Servo performance and assure flight precision.

    Lynx upgrade design: the new frontier of lightweight and high precision upgrade parts for micro helicopters.

    DS-895-HV SERVO FEATURES:

    • Direct replacement for the standard 180 CFX cyclic servo.
    • Servo Case Material: CNC Aluminum Cover and Rear Case with Techno Polymer Core.
    • Full Metal Gear Digital Precision Servo (Brass and Aluminum Alloy)
    • Input (V-in): 4.5 to 6 V
    • Frequency: 333 Hz
    • Neutral Point: 1500μs
    • Speed:     0.06 sec / 60° at 4.5V
    •      0.05 sec / 60° at 6 V
    • Stall Torque: 1.40 kgcm at 4.5V
    •             1.80 kgcm at 6 V
    • Dimension: 20.05 x 8.35 x 19.70 mm
    • Connector JST-1.50 (180CFX standard)
    • Weight including 150 mm cable connector: 6.50g
    • Output Gear support: Radial bearing 4x7 W2
    • Servo Arms: 4 type included + LX1097 - Micro Servo Gear Saver Arm preinstalled at zero-degree pitch.

    PACKING LIST:
    1 x DS-895-HV Aluminum Case Servos

     

    SKU: LX2512
    €36.00
    inc. VAT

  • Lynx Servo DS-895-HV Aluminum CNC Case - 3PC Set

    Lynx Servo DS-895-HV Aluminum CNC Case - 3PC Set

    Lynx Heli Innovations introduce the first Metal Case Servo for 180 CFX.

    Using the Lynx LX9004 Lynx Servo DS-895-HV, we build a special Cover and Rear Case in order to increase global Servo performance.

    After many pilot report and crash we decided to improve the standard Lynx DS-895-HV Servo with precision CNC Servo Cover and Rear Case.

    With this Metal Case, servo become more precise and robust in case of crash, gear mesh become very precise and cannot move as can upend on plastic case for wear or crash shock.

    The other important feature is the incredible heat-sink effect of CNC Rear Cover. Thanks a special design the motor case is in direct connection with Rear Cover keeping the motor temperature under dangerous values, increasing the global performance and the spam-life.

    Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight and features, this Servo Case will increase Servo performance and assure flight precision.

    Lynx upgrade design: the new frontier of lightweight and high precision upgrade parts for micro helicopters.

     
    DS-895-HV SERVO FEATURES:

    • Direct replacement for the standard 180 CFX cyclic servo.
    • Servo Case Material: CNC Aluminum Cover and Rear Case with Techno Polymer Core.
    • Full Metal Gear Digital Precision Servo (Brass and Aluminum Alloy)
    • Input (V-in): 4.5 to 6 V
    • Frequency: 333 Hz
    • Neutral Point: 1500μs
    • Speed: 0.06 sec / 60° at 4.5V -  0.05 sec / 60° at 6 V
    • Stall Torque: 1.40 kgcm at 4.5V - 1.80 kgcm at 6 V
    • Dimension: 20.05 x 8.35 x 19.70 mm
    • Connector JST-1.50 (180CFX standard)
    • Weight including 150 mm cable connector: 6.50g
    • Output Gear support: Radial bearing 4x7 W2
    • Servo Arms: 4 type included + LX1097 Micro Servo Gear Saver Arm preinstalled at zero-degree pitch.

     Packing List:

    • 1 x Set of 3 x DS-895-HV Aluminum Case Servos.

    Note: The servo can be Silver-Blue or Silver-white color and this change does not affect servo's specification.

     

    SKU: LX1817
    €115.99
    inc. VAT

     LOW STOCK
  • MSH U Brain 2 - FBL

    MSH U Brain 2 - FBL

    Description:

    Micro Brain2 Flybarless System

    The next generation of Brain2 Flybarless systems is here!  Featuring 6 different hardware versions optimized for different applications, and robust enough to work in any setup from 180 to 900mm size models.

    Some of the exciting new features of the Brain2 system include:

    • 4x faster CPU with increased memory and flash
    • Logging capability (up to 50hz sampling rate with 10 simultaneous variables)
    • Built in Bluetooth for connecting wireless to iPhone, Android, or PC (Only on Brain2BT and Brain2BT HD)
    • In flight vibration logging
    • In flight event logging
    • New Rescue feature (auto learning/calibration)
    • iPhone, Android, or PC configuration/tuning applications
    • Jeti Transmitter integration

    Of course Brain2 includes the legendary flight performance of Brain1, full governor for Nitro/Electric, and support for most model types.  Brain2 is easily configured using the PC application, iPhone, or Android phone/tablets.

    Ultra Compact, Big Performance:

    Micro Brain2 brings big time flybarless performance, governor, logging, rescue, vibration analysis to the micro helicopter.  Ultra small and drop in compatible with models like the Blade 180CFX.  It takes your micro experience to the next level.

    New CPU 4x the performance, 4x storage, hardware acceleration.  Ready for years of feature enhancements.

    USB Power Capability for Configuration:

    No need to power the model up now to make quick configuration changes or to view flight logs.  Just plug in the USB port and the Brain2 powers up, with an integrated diode to prevent powering the servo power bus (no need to take the blades out of the blade holder!)..  Quick changes have never been so easy.

    Event Logging:

    Brain2 is always recording the major events during your flight.  This lets you go back and review vital information to confirm proper operation or see valuable information to help with troubleshooting

    Vibration Logging, Analysis, and Playback:

    Troubleshooting mechanical problems has never been easier.  Brain2 can play back your entire flight showing you vibrations as the model moves through maneuvers.  This gives you a greater understanding of the health of the model and points you to the motor, head, or tail sections.  Vibration logging can save endless hours of trial and error searching and give you peace of mind that the model is in good health.

    Logs:

    Brain2 takes logging and data collection to a new level of capability.  Record up to 10 parameters for each flight and download them later for review.

    Brain2 provides access to all the critical data parameters visible to the flybarless unit.  Some examples include: Voltage, receiver packets, throttle out, RPM, vibration, TX inputs, aileron/elevator rates, tail rate, pitch and more.

    This information is incredibly useful for tuning governors on nitro or electric, verifying that your BEC or Rx LiPo is performing how you expect, checking if your radio is working well, seeing the real roll/flip/piro rates, etc.

    The logging memory capacity is large enough to hold several flights of information so after a flying session, you can always download the logs for viewing later, or for sharing with other users.

    Rescue:

    New rescue feature saves the model from any orientation, stabilizing it to hover and adding pitch to avoid any impact with ground. New rescue is a great tool for beginners or for pilots experiencing new manouvers. - See more at: http://www.msheli.com/en/MSHeli-Protos-Flybarless-System/brain-2-flybarless#sthash.p19kaz49.dpuf

    The new Brain2 rescue feature saves the model from any orientation, stabilizing it into a hover and adding pitch to avoid impact with the ground. This is an amazing tool for beginners or those working on new maneuvers where there is a higher risk of loss of orientation and control.

    Use your phone or tablet to configure and tune

    Ditch your laptop and use the iPhone or Android application to configure your Brain2 flybarless system.  Have instant easy access to the entire system at the field or on the bench to quickly change parameters. MSH Bluetooth module is required for Brain2 systems that do not have integrated Bluetooth.

    Configuration Wizard:

    The Brain2 configuration wizard gets you flying fast with default configurations tuned for each model size.

    Governor:

    Pull every ounce of performance from your model with Brain2's advanced built in governor.  Fine tuned from years of continued development.  Utilize the built in logging to tune the governor even further, even if your ESC or Nitro has no native logging ability.  Brain2 captures the data you need.

    Flight Counters:

    Track the number of flights of the model, but also track the life of individual components, like gears and belts.

    Advanced Tuning:

    Tweak to your hearts content. Brain2 gives you direct access to every tunable parameter in the system. Each parameter includes pop-up instructions to help inform you of how the parameter works.  As your flying advances, now so can your ability to tune to your taste.  Get every ounce of performance from your machines.

    SKU: MSH51640
    €109.99
    inc. VAT

     72HR STOCK
  • OXY Heli Carbon Plastic Main Blade 190mm

    OXY Heli Carbon Plastic Main Blade 190mm

    OXY Heli Carbon Plastic Main Blade 190mm

    SKU: SP-OXY2-045
    €6.80
    inc. VAT

     72HR STOCK
  • OXY2 - 113T Straight Tooth Main Gear set

    OXY2 - 113T Straight Tooth Main Gear set

    OXY2 - 113T Straight Tooth Main Gear set

    SKU: SP-OXY2-116
    €21.00
    inc. VAT

     IN STOCK
    NEW
  • OXY2 - CNC Main Gear, 110T

    OXY2 - CNC Main Gear, 110T

    OXY2 - CNC Main Gear, 110T CNC Main Gear

    SKU: SP-OXY2-018
    €17.40
    inc. VAT

  • OXY2 - Damperner

    OXY2 - Damperner

    Description:

    OXY2 - Damperner

    Packing List:

    • 1 Set x OXY2 - Damperner
    SKU: SP-OXY2-003
    €4.90
    inc. VAT

     IN STOCK
  • OXY2 - DFC Pin Screw

    OXY2 - DFC Pin Screw

    Description:

    OXY2 - DFC Pin Screw

    Packing List:

    • 1 Set x  OXY2 - DFC Pin Screw
    SKU: SP-OXY2-058
    €4.45
    inc. VAT

     LOW STOCK
  • OXY2 - Main Grip Black, 3Pc

    OXY2 - Main Grip Black, 3Pc

    OXY2 - Main Grip Black, 3Pc

    PACKING LIST:

    • 3 x Oxy2 - Main Grip Set - Black Color

    Note:

    • The Main Grip Used on Oxy 2 Cube System are the same used on the STD Oxy 2 FE Edition.
    SKU: OSP-1255
    €35.90
    inc. VAT

     72HR STOCK
  • OXY2 - Plastic DFC Arm

    OXY2 - Plastic DFC Arm

    Description:

    OXY2 - Plastic DFC Arm

    Packing List:

    • 2 Set  x OXY2 - Plastic DFC Arm
    SKU: SP-OXY2-004
    €5.00
    inc. VAT

     IN STOCK
  • OXY2 - Qube 3 Blade Center Hub

    OXY2 - Qube 3 Blade Center Hub

    OXY2 - Qube 3 Blade Center Hub

    PACKING LIST:
    1 x Oxy2 - 3 Head System Center Hub with hardware

    SKU: SP-OXY2-087
    €14.90
    inc. VAT

     72HR STOCK
  • OXY2 - Qube 3 Blade Holder, Black

    OXY2 - Qube 3 Blade Holder, Black

    OXY2 - Qube 3 Blade Holder, Black     

    PACKING LIST:
    1 x Oxy2 - 3 Head System Blade Holder 3D Printed TPU - Black

    SKU: SP-OXY2-098
    €5.90
    inc. VAT

     72HR STOCK
  • OXY2 - Qube 3 Blade Ultra Swashplate, Red

    OXY2 - Qube 3 Blade Ultra Swashplate, Red

    OXY2 - Qube 3 Blade Ultra Swashplate, Red

    PACKING LIST:
    1 x Oxy2 - 3 Head System Swashplate, red

    SKU: SP-OXY2-090
    €22.90
    inc. VAT

     72HR STOCK
  • OXY2 - Qube DFC Arm Set

    OXY2 - Qube DFC Arm Set

    OXY2 - Qube DFC Arm Set

    PACKING LIST:
    1 Set x Oxy2 - 3 Head System DFC Arm

    SKU: SP-OXY2-089
    €5.90
    inc. VAT

     72HR STOCK
  • OXY2 - Qube Spindle Shaft Assembly, 3pc - set

    OXY2 - Qube Spindle Shaft Assembly, 3pc - set

    OXY2 - Qube Spindle Shaft Assembly, 3pc - set  

    PACKING LIST:
    3 x Oxy2 - 3 Head System Preassembled Spindle Shaft

    SKU: SP-OXY2-091
    €24.90
    inc. VAT

     72HR STOCK
  • OXY2 - Qube Spindle Shaft only, 6pc - set

    OXY2 - Qube Spindle Shaft only, 6pc - set

    OXY2 - Qube Spindle Shaft only, 6pc - set  

    PACKING LIST:
    6 x Oxy2 - 3 Head System Spindle Shaft Only

    SKU: SP-OXY2-092
    €17.90
    inc. VAT

     72HR STOCK
  • OXY2 - Spindle Shaft

    OXY2 - Spindle Shaft

    Description:

    OXY2 - Spindle Shaft

    Packing List:

    • 2 Set  x OXY2 - Spindle Shaft
    SKU: SP-OXY2-008
    €7.50
    inc. VAT

     72HR STOCK
  • OXY2 190 Sport - Main Shaft Bearing Block, Set

    OXY2 190 Sport - Main Shaft Bearing Block, Set

    OXY2 190 Sport - Main Shaft Bearing Block, Set

    Techno Polymer Main Shaft Bearing Block pre-assembled with Bearings.

    PACKING LIST:
    1 Set - OXY 2 190 Sport - Main Shaft Bearing Block with Bearing.

    NOTE:
    This part can used in any OXY 2 Edition.

    SKU: SP-OXY2-114
    €15.90
    inc. VAT

     LOW STOCK
  • OXY2 190 Sport - Swashplate

    OXY2 190 Sport - Swashplate

    This Swash Plate have Techno Polymer Base and Aluminum CNC Upper Ring.
    Come pre-assembled with Bearing and Swivel Ball

    PACKING LIST:
    1 Set - OXY 2 190 Sport - SwashPlate

    NOTE:
    This part can used in any OXY 2 Edition.

    SKU: SP-OXY2-113
    €19.90
    inc. VAT

     72HR STOCK
  • OXY2 190 Tail Boom

    OXY2 190 Tail Boom

    OXY2 190 Tail Boom

    SKU: OSP-1207
    €6.35
    inc. VAT

     LOW STOCK
  • OXY2 38mm Tail Blade Orange

    OXY2 38mm Tail Blade Orange

    Description:

    OXY2 38mm Tail Blade Orange

    Packing List:

    • 1 Set x OXY2 - 38mm Tail Blade, Orange

     

    SKU: SP-OXY2-074
    €4.50
    inc. VAT

     IN STOCK
  • OXY2 38mm Tail Blade Yellow

    OXY2 38mm Tail Blade Yellow

    Description:

    OXY2 38mm Tail Blade Yellow

    Packing List:

    • 1 Set x OXY2 - 38mm Tail Blade, Yellow

     

    SKU: SP-OXY2-102
    €4.50
    inc. VAT

     IN STOCK

Manufacturers

Back