OXY heli by Lynx

Lynx Oxy 3 Helicopter Kit 255 mm with Main Blades

Oxy 3 is the first helicopter in the Oxy Helicopter range.
It is a 250 mm blade electric heli, with belt driven tail rotor, suitable for all micro servos.
It is designed to handle high rpms (up to 4500), and in the future can grow with a stretch kit up to 280mm blades.
Special upgrades will be available to run 3 or 4 blade heads, and a full fuselage to satisfy the requirements of all users

Main features:

• Heli designed for intense 3D performance:
• Ultra rigid frame
• Triple main shaft supports
• Quality injection molded plastics
• Lightweight, high visibility and high-end airbrush canopy from Canomod
• Autorotation integrated into main gear hub

Main rotor:

• Semi rigid DFC head system (default Head) for precise performance and optional parts for easy FBL head system conversion.
• Thrust bearings in main and tail grips
• Oversize hardened spindle
• Ball raced 120° CCPM serviceable swash plate
• Swashplate linkages optimized geometry

Tail system:

• Belt drive tail (low parts count and low crash cost)
• Innovative delta box tail boom with no requirement for boom supports
• Tail optimized to minimize vibration and servo load at high tail speed
• CNC tail pulley with pretension pulley system
• Rigid carbon fiber 3mm diameter tail push rod for the increased tail control
• Electronics & Power system
• Battery tray fits a variety of battery packs 3s -4s (1300 to 1600 mAh) , 6s  (800 to 950 mAh) max length 75mm.
• ESC support suitable for 35 to 50A ESC – suggested: CC Talon 35 – HW 40 – HW 50
• Motor Options: Any motor for 300 to 450 class with 3.17 motor shaft and KV form 1900 to 4100 in function your battery set up (3 and 4S 3900 to 4100 KV – 6S 1900 to 2600 KV) – suggested EOX by Lynx 2214 to 2222 series – Scorpion 2213 to 2221 series – X Nova 2600 KV Tareq Edition.
• Hardened Steel Pinion included in the kit: 11T and 14T 3.17mm Shaft (optional pinions: 10-11-12-13-14-15)
• Suitable for most micro cyclic and tail servos – suggested combo:  4 x KST215MG – 3 x Servo King 995 + 1 x 995i – MKS 3 x D92A + 1 x 95i – BK Servo BK DS3001HV or any servo for 300 to 450 heli class.
• Smart and clean electronic wiring set up.
• Smart and protected FBL unit position – suggested FBL MSH Brain – IKON – Mikado mini VB / Neo Spartan – Micro Beast – AR7200

Specifications:

• Length: 530mm Height: 175mm Width: 80mm
• Main rotor blade length: 255mm
• Tail blade length: 47mm and 50mm in std kit for different tail authority need (suggested 47mm for Hard 3D Set-Up) – Black Color
• Slant main gear: 140T 0.5 Mod
• Wide head speed range: 3000 for sport flying a to 5000 for insane 3D
• Tail gear ratio 3.933 (15T pulley) , optional Tail Shaft Pulley 14T for low Head Speed set up
• Approximate RTF weight: 580g with 3s 1300mAh battery– suitable for 3.5 minutes of intense 3D at 4000rpm

OXY3–255 KIT CONTENTS:

1 x Oxy 3 Kit with DFC Head System.
1 x Oxy 3 Canomod Canopy – Orange Yellow Schema
1 x set ZEAL CF Main Blade 255mm – Carbon / White color
1 x Oxy Heli by Lynx Service Towel Black
1 x Swash Plate Lever Tools with Zero Pitch function
1 x set Plastic Tail Blade 47mm, Black
1 x set Plastic Tail Blade 50mm, Black
1 x set Colored Tail Fin Sticker (Yellow – White – Orange)
1 x CD Rom User Manual

Oxy 3 Helicopter Kit (OXY3-255) with Zeal blades, Canomod canopy, made by Division of Lynx, Full CNC aluminum and carbon fiber kit w/ DFC Head
Motor EOX 2214 V2 - 4100KV Black Edition
ESC 40A Hobbywing OEM OXY3

Free lipo pack from Optipower or Gens 3s or 4s( specify your wish)

This Version includes:

• Kit - FG Canomod Canopy
• Main Blade CF 255 Zeal - Tail Blade plastic 47 and 50 mm
• Motor EOX 2214 - 4100 KV
• ESC Hobbywing 40A Platinum

Main features

• Heli designed for intense 3D performance:
• Ultra rigid frame
• Triple main shaft supports
• Quality injection molded plastics
• Lightweight, high visibility and high-end airbrush canopy from Canomod
• Auto-rotation integrated into main gear hub

Main rotor

• Semi rigid DFC head for precise performance
• Thrust bearings in main and tail grips
• Oversize hardened spindle shaft
• Fixable swash plate Ball raced 120° CCPM (can be disassembly and repair)
• Optimized geometry swashplate linkages

Tail system

• Belt drive tail (low parts count and low crash cost)
• Innovative delta box tail boom with no requirement for boom supports
• Optimized tail case and tail rotor design to minimize vibration and servo load at high tail speed
• CNC tail pulley with pretension pulley system
• Rigid 3mm diameter carbon fiber tail push rod for good tail control

Electronics & Power system

• Battery tray fits a variable battery packs from 3S -4S (1300 to 1600 mAh) , 6S  (800 to 950 mAh)  max length 75mm
• ESC support suitable for 25 40A ESC and more
• Kit Motor: EOX 2214 Black Edition 4100KV 3.17mm Shaft suitable for 3s and 4s battery packs
• Hardened Steel Pinion included in the kit: 11T suitable for 4s 4100 kV motors and 14T suitable for 3s 4100 kV motors(optional pinions: 12-13-15)
• Suitable for most micro cyclic and tail servos
• Smart and clean electronic wiring set up

Specifications

• Length: 530mm, Height: 175mm, Width: 80mm
• Main rotor blade length: 255mm
• Tail blade length: 47mm
• Slant main gear: 140T 0.5 Mod
• Wide head speed range: 3000 for sport flying a to 4500 for insane 3D
• Tail gear ratio 4.214 (14T pulley) for 3800 4500rpm (optional 13T pulley available for low head speed 3000-4000 rpm)
• Approximate RTF weight: 580g with 3s 1300mAh battery suitable for 3.5 minutes of intense 3D at 4000rpm

OXY 3 Tareq Edition Lynx Heli Innovation Super combo set  comes with 4 or 6s versions, and including:

4S version for Sport and 3D flyers

OXY 3 Tareq Edition with Zeal blades, Canomod canopy.
Motor Scorpion HKv2 2221-6
ESC 40A Heli version, Hobbywing
3 x Micro Servo SAVOX 0255 or KST
1 x Micro Servo Savox Tail 0262/0257/KST
1 x Lipo alarm device
1 x Helicopter Carry Bag
1 x Lipo Optipower or gens ace 4S 1300Mah

6S version is for crazy pilots only, be sure you understand this Insane Setup

OXY 3 Tareq Edition with Zeal blades, Canomod canopy.
Motor Scorpion HKv2 2221-2010
ESC 40A Heli version, Hobbywing
3 x Micro Servo sAVOX 0255 /kst
1 x Micro Servo Savox Tail 0262/0257 servo/kst
1 x Lipo alarm device
1 x Helicopter Carry Bag
1 x Lipo Optipower or gens ace 6s 900-1000mah

OXY3 Combo

• Helicopter Kit
• Carry Bag (SP-OXY3-096)
• ECOXY3-003 Set:
• with Motor 2214-4100KV, ESC, 4 x Servos KST DS215MG-V3

The OXY 3 Tareq Edition Electric Helicopter Kit was designed by Oxy Heli and Lynx for Tareq Alsaadi. The OXY 3 - Tareq Edition is the diamond standard of the OXY 3 line. Tareq has helped with testing since the inception of the OXY 3, and thanks to his experience and insane 3D skills, he has helped to create an OXY 3 that is worthy of wearing the Tareque Alsaadi signature edition badge. The OXY 3 Tareq Edition Kit is not only more capable than the standard OXY 3, but it has been equipped to handle more power and stand up better to hardcore 3D punishment.

OXY 3 Tareq Alsaadi Edition Features:

•     Increase the size of the standard Oxy 3 from a 255 up to 285mm main blade using a Stretch Kit
•     Increased 4500 rpm Head Speed
•     Replace standard kit plastic parts with precision CNC aluminum parts and increase rigidity and wear resistance
•     Redesigned Canopy with a low volume design to increase speed and reduce drag
•     100% 3K Carbon Fiber composite canopy is 30% lighter than the standard OXY canopy
•     Unique look using high quality materials, and a Sky Dubai Orange / Black / Carbon color scheme

Oxy 3 Tareq Edition – Specifications:

    Frame & Canopy:

•         Canopy: 100% 3K Carbon Fiber Epoxy construction
•         Landing Gear: Carbon Fiber / Aluminum CNC support
•         Main Gear: CNC POM Copolymer
•         Motor Mount: CNC Sandwich Stiffener System Lock
•         Pulley Guide Belt: CNC Aluminum
•         Tail Boom Clamp: CNC Aluminum, CNC Sandwich Stiffener System Lock
•         Canopy Mount: CNC Aluminum
•         Anti-Rotation Guide: Plastic-Carbon

    Head System:

•         Main Blade: Carbon Fiber Zeal Energy Orange 285mm
•         Head System: DFC with CNC Aluminum Arm.
•         FBL Alu Head orange anodized

    Tail System:

•         Boom: Stretch – max main blade 285mm
•         Tail Servo Support: CNC Aluminum
•         Tail Push Rod: Reinforced Design with Carbon Fiber and Aluminum terminals
•         Tail Case: Reinforced System with Carbon Fiber and Aluminum parts
•         Tail Pitch Slider: CNC Aluminum
•         Tail Bell Crank: CNC Aluminum
•         Tail Blades: 47 and 50mm Plastic Black

Includes:

•     Autographed Tareq Oxy 3 Picture
•     Oxy Towel
•     Swash Plate Leveler Tool
•     4mm Reamer Linkage Tool
•     11 and 14T Pinions
•     Vertical Fins Colored Stickers
•     Landing Gear skid Colored Stickers

Needed To Complete:

•     6-Channel Helicopter Transmitter System
•     (3) Micro cyclic servos
•     (1) Micro tail servo
•     (1) Flybarless System
•     (1) 3S-4S (1300 to 1600mAh), or 6S (800 to 950mAh) LiPo Battery – max length 75mm
•     (1) 2214-4100Kv (4S) or 2214 – 2600Kv (6S) Motor
•     (1) 40A/50A Helicopter ESC
•     Compatible Battery Charger