Goblin 570 / 570 Sport

• Aluminum Servo Support x 1pc
• ABEC-5 Bearing 8 x 16 x 5 x 1pc

Use for Goblin 500/570

Includes:

• Aluminum Spacer 28mm x 3pcs

Use for Goblin 500/570

• Aluminum Spacer 54mm x 6pcs

Use for Goblin 500/570

• Battery Velcro Strap 440mm L 20mm W x 3pcs

Use for Goblin 500/570

Includes:

• Aluminum Sensor Support x 2pcs
• Carbon Fiber Flybarless Support x 1pc
• DIN 12.9 Socket Head Cap M2,5x8 x 4pcs

Use for:

• Goblin 500/570

H0249-S Carbon Fiber Tail Locking Element

For The SAB Goblin 500/570

DIN 12.9 Cup Point Set Screws M3x8 (5pcs) - Goblin 500 [HC148-S]

Includes:

• DIN 12.9 Cup Point Set Screws M3x8 x 5pcs

Use for:

• Goblin 50/570

DIN 12.9 Cup Point Set Screws M4x15 (5pcs) for Goblin 500/570

DIN 12.9 Flat Head Socket Cap M3x5 (5pcs) for Goblin 500/570

Oring Dampener (4pcs) for Goblin 500/570

H0234-S Plastic Bell Crank Leveler for The SAB Goblin 500/570

 Self Tapping screws M3x10 (5pcs) for Goblin 500/570

SHIMS 10X16X0,1 (5pcs) for Goblin 500/570

SPACER 8x12,5x05 (2pcs) for Goblin 500/570

H0287-S Spacer Set for The SAB Goblin 500/570

Spacer Ø4 x Ø18 x1 (4pcs) for Goblin 500/570

Spring Set for Goblin 500/570

Includes:

• Spring de 3 / df 0,53 / LL 35 x 2pcs
• Spring de 5 / df ,3 / LL 6 x 2pcs

H0237-S Steel Main Linkage HPS for The SAB Goblin 500/570

Steel Spindle Shaft for The SAB Goblin 500/570

H0227-S Steel Tail Shaft for The SAB Goblin 500/570

H0220-S Steel Tail Spindle Shaft for The SAB Goblin 500/570
 

H0233-S Tail Pitch Slider Assembly for The SAB Goblin 500/570

Washer Ø6,1 x Ø12 x 1 (10pcs) for Goblin 500/570

DIN 12.9 Shouldered Socket Head Cap M3x22 screw, Special (5pcs)

For The SAB Goblin 500/570/630/700/770

Goblin 570 Canomod Airbrush Canopy White/Grey

Includes:

• Canomod Airbrush Canopy Yellow/Orange x 1pc
• Canopy Grommet x 2pcs
• Canopy Mousse x 1pc
• Canopy Edge Protection x 1pc
  

Use for:

Goblin 570

• Carbon Fiber Tail Boom Red x 1pc
• Nylon Screw M8 x 14 x 2pcs
• Metric hex locknut Nuts M3 H4 x 6pcs
• Carbon Fiber Tail Locking Element x 2pcs
• Double Side Tape x 2pcs
• Tail Boom M3 Block Nut x 1pc
• Double Side Tape x 2pcs

Socket Head Cap M3x12 (5pcs) for Goblin 630/700/770

Socket Head Cap M3x16 (5pcs) for Goblin 630/700/770

Socket Head Cap M3x22 (5pcs) for Goblin 630/700/770

• Aluminum Tail Blade Grip x 2pcs
• ABEC-5 Bearing 4 x 9 x 2,5 x 4pcs
• Spacer 7 x 9 x 0,5 x 2pcs
• Thrust bearing 4 x x 4 x 2pcs
• DIN 12.9 Socket Head Cap  M3x6 x 2pcs
• DIN 12.9 Button Head Cap M2x6 x 2pcs

Use for Goblin 500/570

New Swash Plate Set Goblin 500/570 2 blades head Black Matte

Includes :

• New Swashplate Set x 1
• Unibal M3 x 4 5 H18 x 1pc
• Unibal M3 x 4 5 H13 x 1pc

Use for:
Goblin 500/570 2 blades Head

Includes:

• Canopy Mousse x 1pcs
• Canopy Orange G570 x 1pcs
• Canopy Grommet x 2pcs
• Canopy Safe 80cm x 1pcs

Use for:

• Goblin 570 Sport

Specific for Goblin 570 three-blade.
Flight type: acrobatic sports / 3D

Technical data:
Length: 540 [mm]
Chord: 43 [mm]
Root: 10 [mm]
Hole: 4 [mm]

The new 540mm BlackLine blade is the last product that SAB Heli Division offers for 3D flight in the world of three blade rotors. This solution offers an high agility thanks to weight and dimensions reduction maintaining all BlackLine performances.
"Tapered tip has three effects: reduces rotor aerodynamic drag, gets the center of gravity close to rotation axis and reduces noise.
"The symmetric profile has lower thickness and little chord. It offers better reaction to flybarless systems and it maintains high aerodynamic and structural performances.
"The reduced weight and the center of gravity position are chosen in order to get a better rotor response from pilot's control.
Every feature is chosen in order to take advantage of three--blade rotor qualities.

High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

Length: 105 [mm]
Width: 27/30 [mm]
Root: 5 [mm]
Bolt Hole: 3 [mm]

Includes:

• Plastic Servo Horn x 4pcs

Use for:

• Futaba servos
• Savox servos
• Align servos
• BK servos
• Outrage servos
• MKS servos

Thanks to the variable chord, the "Thunderbolt Bladest" tail rotor blades offer a more reactive response to the pilot command. That means that the tail moves more rapidly and can allows faster maneuvers, but at the same time the blades offer a better controllability of the helicopter.
Each helicopter requires the best possible matching combination of main and tail rotor blades.
Therefore, we have designed the perfect tail rotor blades to suit all your needs.
High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

Length: 105 [mm]
Width: 27/30 [mm]
Root: 5 [mm]
Bolt Hole: 3 [mm]