Glue

Glue

In this section you can find different sorts of Glue

Products


  • ZAP 30m EPOXY

    ZAP 30m EPOXY

    Uses:

    30 MINUTE Z-POXY is a premium high strength two part epoxy adhesive. The 30 minute cure time allows a greater working time and increased pot life. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. Use it on all fire wall and engine mount installations, its perfect for attaching bulkheads and formers in epoxy glass fuselages and boat hulls. It does not get brittle with age and its easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for all types of wood working and furniture repair.

    Helpful Hints:

    30 MINUTE Z-POXY does fully cure in approximately 30 minutes, that means you will have about 15 minutes working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of 30 MINUTE Z-POXY is possible in smaller ratios, thinning too much will alter the cured properties and may not produce an adequate bond. It is best to test the thinned epoxy, let it cure and adjust as need. Mix Z-POXY in a plastic cup or on a non porous surface like a piece flexible plastic. Only mix enough epoxy as needed, any excess epoxy cannot be saved after it has been mixed. Pot life and cure time will vary when the epoxy is thinned. Since epoxies cure by an exothermic chemical reaction, ( give off heat ) and heat can speed the cure of epoxy, mixing large amounts can shorten the pot life if not spread out right away. For a quick cure epoxy, use Z-POXY QUICK SET 5 MIN. FORMULA part numbers PT-37 and PT-38.

    PT-39
    8oz. (227.2ml) Z-POXY 30 Minute

    SKU: ZAPPT39
    €19.90
    inc. VAT

     IN STOCK
  • ZAP 5m EPOXY

    ZAP 5m EPOXY

    Uses:

    5 MINUTE Z-POXY is a premium high strength two part epoxy adhesive. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. Use it on all fire wall and engine mount installations, its perfect for attaching bulkheads and formers in epoxy glass fuselages and boat hulls. It does not get brittle with age and its easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for all types of wood working and furniture repair.

    Helpful Hints:

    5 MINUTE Z-POXY does fully cure in approximately 5 minutes, that means you will have about 2 minutes working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of 5 MINUTE Z-POXY is possible in smaller ratios, thinning too much will alter the cured properties and may not produce an adequate bond. It is best to test the thinned epoxy, let it cure and adjust as need. Mix Z-POXY in a plastic cup or on a non porous surface like a piece flexible plastic. Only mix enough epoxy as needed, any excess epoxy cannot be saved after it has been mixed. Pot life and cure time will vary when the epoxy is thinned. Since epoxies cure by an exothermic chemical reaction, ( give off heat ) and heat can speed the cure of epoxy, mixing large amounts can shorten the pot life if not spread out right away.

    PT-38
    8oz. (227.2ml) Z-POXY 5 Minute

    SKU: ZAPPT38
    €20.90
    inc. VAT

     IN STOCK
  • ZAP A GAP CA+ 1 OZ (Green)

    ZAP A GAP CA+ 1 OZ (Green)

    SUPERIOR GAP FILLING FORMULA
    MEDIUM VISCOSITY
    ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING
    AVERAGE OF 20 SECONDS FOR CURING
    WORKS ON OILY SURFACES
    USE ZIP KICKER TO ACCELERATE CURE TIME
    AVAILABLE IN 5 CONVENIENT SIZES

    Uses:

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequalled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Some uses besides hobbies and crafts include; jewelry manufacturing and repair, taxidermy, pool cue tips, darts, archery, knife making, mold and pattern making, furniture refinishing and antique repair, auto detailing, dental molds and patterns, ceramic repair, and for fishing, fly line splicing and fly tying. For manufacturing, the ability to bond metal and / or plastic parts allows for fast simple fixturing and positioning for assembly or machining. Wood turners and manufactures of custom wood products appreciate the ability of ZAP-A-GAP CA+ to help save their projects by filling in and bonding cracks that often occur in expensive hard woods. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    Helpful Hints:

    A little goes a long way! More glue doesn’t always mean a stronger joint. Only apply enough glue to evenly coat the area to be bonded when the parts are joined. Many times glue needs to be applied only to one part. Working or positioning time will vary depending on the material. Even though ZAP-A-GAP CA+ is a gap filling formula, some of it will wick into porous materials. For porous products you may have to apply more glue to get the strongest bond, it would be best to try bonding some test pieces to determine the proper amount. For modeling applications where a small fillet is desirable, bond the parts and let the glue set, then go back and create the fillet, use kicker to immediately set the glue. For critical applications test sample joints for the designed strength requirements.

    SKU: ZAPPT02
    €7.90
    inc. VAT

     IN STOCK
  • ZAP A GAP CA+ 1 OZ (Pink)

    ZAP A GAP CA+ 1 OZ (Pink)

    SUPERIOR GAP FILLING FORMULA
    liquid viscosity
    ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING


    Uses:

    ZAP-A-GAP CA+ Is the best selling instant glue in the world. The ability to bond virtually anything to anything with consistency unequalled by any other brand makes it the favorite adhesive across many varied disciplines. Widely used throughout the hobby industry, it is the absolute best and most consistent performing glue for model building and crafting. Some uses besides hobbies and crafts include; jewelry manufacturing and repair, taxidermy, pool cue tips, darts, archery, knife making, mold and pattern making, furniture refinishing and antique repair, auto detailing, dental molds and patterns, ceramic repair, and for fishing, fly line splicing and fly tying. For manufacturing, the ability to bond metal and / or plastic parts allows for fast simple fixturing and positioning for assembly or machining. Wood turners and manufactures of custom wood products appreciate the ability of ZAP-A-GAP CA+ to help save their projects by filling in and bonding cracks that often occur in expensive hard woods. Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help solve many tough bonding problems.

    Helpful Hints:

    A little goes a long way! More glue doesn’t always mean a stronger joint. Only apply enough glue to evenly coat the area to be bonded when the parts are joined. Many times glue needs to be applied only to one part. Working or positioning time will vary depending on the material. Even though ZAP-A-GAP CA+ is a gap filling formula, some of it will wick into porous materials. For porous products you may have to apply more glue to get the strongest bond, it would be best to try bonding some test pieces to determine the proper amount. For modeling applications where a small fillet is desirable, bond the parts and let the glue set, then go back and create the fillet, use kicker to immediately set the glue. For critical applications test sample joints for the designed strength requirements.

    SKU: ZAPPT08
    €7.90
    inc. VAT

     IN STOCK
  • ZAP Foam Safe Kicker

    ZAP Foam Safe Kicker

    Safe on most foam products Compatible with most other Foam Safe CAs Works on Balsa, Spruce, Plywood, Plastic and Metals, etc Forces most CAs to cure in 10 seconds or less Increases Gap filling and fillet forming compatibility None-fuming formula INCLUDES: One bottle of Pacer Foam Safe Kicker One pump REQUIRES: Use with CA glues SPECS: 2oz (59.1ml)

    SKU: ZAPPT28
    €7.60
    inc. VAT

     IN STOCK
  • ZAP Foam safe Odorless

    ZAP Foam safe Odorless

    •   Odorless "no more tears" formula
    •   Safe for all hobby foams
    •   Medium thick, cures in 15 seconds
    •   20-gram bottle

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds.
    Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker.

    Works best on:

    • Carbon Fiber
    • Cell Foam
    • Ceramics
    • EPS Foam
    • Foam Board
    • Polystyrene
    • Wood

     

    SKU: ZAPPT25
    €10.00
    inc. VAT

     IN STOCK
  • ZAP kicker refill

    ZAP kicker refill

    ZAP Zip Kicker (CA Glue Accelerators)
    FORCES IMMEDIATE CURE OF CYANOACRYLATE GLUE
    BEST ACCELERATOR FOR ZAP AND ALL OTHER SUPER GLUES
    EXPANDS GAP FILLING CAPACITY
    SOLVES MOST TOUGH TO BOND MATERIAL COMBINATIONS


    Uses:

    ZIP KICKER Is the best way to accelerate the cure time of all brands of super glues. When sprayed directly on a glued joint it forces the immediate cure of the CA glue. Thick or slow style glues form an instant hard outer shell when sprayed with ZIP KICKER, the catalytic action begins curing the remaining liquid CA at an accelerated rate from the outside in, creating a strong bond.This action allows the creation of small to very large fillets and the ability to fill large gaps or cracks.Wood turners love this ability and often are able to progressively fill in large cracks and save the piece they are working on. ZIP KICKER will not harm most materials making perfect to use not only on wood but various plastics, metals, paints, and fabrics.

    Helpful Hints:

    A little goes a long way!Because ZIP KICKER cures CA glue by a chemical reaction, you can precisely control how fast the glue sets up.Use a small amount to start the reaction at one spot and it will continue until the glue is set.The more ZIP KICKER you apply to the glue, the faster it will cure. Once the entire surface of the glue has been sprayed with kicker and the reaction has started, adding more kicker will not speed up the cure rate.In hard to reach areas or when trying to join parts that are not porous you can pre-treat one of the parts to be joined with ZIP KICKER, apply ZAP GLUE to the other and join the two together.When working with balsa wood spraying ZIP KICKER on the back side of thin sheeting can set the CA underneath.Even a part treated with ZIP KICKER and allowed to dry will speed the cure time of any CA that comes in contact with it.DO NOT SPRAY ZIP KICKER AROUND YOUR BOTTLES OF CA,A SMALL AMOUNT OF KICKER ON THE OPENING OF YOUR CA BOTTLE CAN AND WILL SET OFF AND HARDEN THE ENTIRE BOTTLE.Although ZIP KICKER will work on most materials and paints, always test on samples for compatibility.For critical applications test sample joints for the designed strength requirements.

     

    SKU: ZAPPT29
    €14.00
    inc. VAT

     72HR STOCK
  • ZAP SLO-ZAP CA- 1 Oz

    ZAP SLO-ZAP CA- 1 Oz

    Thick and strong for high-stress areas. Ideal for laminating and forming fillets.
    Allows you 30 seconds to position; cures in 60 sec.
    1-oz /28.3gr bottles

    SKU: ZAPPT20
    €8.00
    inc. VAT

     IN STOCK
  • ZAP Slo-Zap CA-56gr

    ZAP Slo-Zap CA-56gr

    Thick and strong for high-stress areas. Ideal for laminating and forming fillets.
    Allows you 30 seconds to position; cures in 60 sec.
    2-oz /56gr bottles

    SKU: ZAPPT33
    €14.90
    inc. VAT

     LOW STOCK
  • ZAP Threadlocker Z-71 (Red)

    ZAP Threadlocker Z-71 (Red)

    RED THREAD LOCKER
    PREMIUM GRADE
    FORMULATED FOR METAL TO METAL
    DISASSEMBLE WITH HEAT
    PREVENTS LOOSENING DUE TO VIBRATION


    PT-71
    .20oz. (6ml) Z-71 Red Threadlocker

    SKU: ZAPPT71
    €4.50
    inc. VAT

     IN STOCK
  • ZAP Z-42 Blue Thread Locker

    ZAP Z-42 Blue Thread Locker

    Medium strength general purpose thread locker Locks threaded fasteners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt) Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip

    Comments:
    This bottle of glue will appear big in context to the glue. The reason being is the glue requires a large amount of oxygen or the glue will dry out. All one would need to do once you have the glue is shake the bottle and turn upside down, if the tip turns Blue then the glue is present. To some the bottle may appear empty.

    Application:
    * Please remove all grease, moisture glue and apply the adhensive to the surface to be adhered, (Not Plastic Bolts)
    * Wait for 1 ~ 10 minutes before exerting force to stabilize the adhensive grip.
    * Excessive glue may result in extended gluing time.
    * Seals Metal Parts Against Vibration, Parts Can Later Be Separated Using Hand Tools
    SKU: ZAPPT42
    €4.50
    inc. VAT

     72HR STOCK
  • ZAP Zip Kicker Aerosol

    ZAP Zip Kicker Aerosol

    ZIP KICKER is the best way to accelerate the cure time of all brands of super glues. When sprayed directly on a glued joint it forces the immediate cure of the CA glue. Thick or slow style glues form an instant hard outer shell when sprayed with ZIP KICKER, the catalytic action begins curing the remaining liquid CA at an accelerated rate from the outside in, creating a strong bond. This action allows the creation of small to very large fillets and the ability to fill large gaps or cracks. Wood turners love this ability and often are able to progressively fill in large cracks and save the piece they are working on. ZIP KICKER will not harm most materials making perfect to use not only on wood but various plastics, metals, paints, and fabrics. A little goes a long way! Because ZIP KICKER cures CA glue by a chemical reaction, you can precisely control how fast the glue sets up. Use a small amount to start the reaction at one spot and it will continue until the glue is set. The more ZIP KICKER you apply to the glue, the faster it will cure. Once the entire surface of the glue has been sprayed with kicker and the reaction has started, adding more kicker will not speed up the cure rate. In hard to reach areas or when trying to join parts that are not porous you can pre-treat one of the parts to be joined with ZIP KICKER, apply ZAP GLUE to the other and join the two together. When working with balsa wood spraying ZIP KICKER on the back side of thin sheeting can set the CA underneath. Even a part treated with ZIP KICKER and allowed to dry will speed the cure time of any CA that comes in contact with it. DO NOT SPRAY ZIP KICKER AROUND YOUR BOTTLES OF CA, A SMALL AMOUNT OF KICKER ON THE OPENING OF YOUR CA BOTTLE CAN AND WILL SET OFF AND HARDEN THE ENTIRE BOTTLE. Although ZIP KICKER will work on most materials and paints, always test on samples for compatibility. For critical applications test sample joints for the designed strength requirements.

    SKU: ZAPPT15
    €7.00
    inc. VAT

     IN STOCK
  • ZAP Zip Kicker Pump

    ZAP Zip Kicker Pump

    Super glue accelerator. Best working accelerator for ZAP and all other super glues you'll find! Sets in just a few seconds. 2-oz pump bottle.

    ZAP Zip Kicker (CA Glue Accelerators)
    FORCES IMMEDIATE CURE OF CYANOACRYLATE GLUE
    BEST ACCELERATOR FOR ZAP AND ALL OTHER SUPER GLUES
    EXPANDS GAP FILLING CAPACITY
    SOLVES MOST TOUGH TO BOND MATERIAL COMBINATIONS


    Uses:

    ZIP KICKER Is the best way to accelerate the cure time of all brands of super glues. When sprayed directly on a glued joint it forces the immediate cure of the CA glue. Thick or slow style glues form an instant hard outer shell when sprayed with ZIP KICKER, the catalytic action begins curing the remaining liquid CA at an accelerated rate from the outside in, creating a strong bond.This action allows the creation of small to very large fillets and the ability to fill large gaps or cracks.Wood turners love this ability and often are able to progressively fill in large cracks and save the piece they are working on. ZIP KICKER will not harm most materials making perfect to use not only on wood but various plastics, metals, paints, and fabrics.

    Helpful Hints:

    A little goes a long way!Because ZIP KICKER cures CA glue by a chemical reaction, you can precisely control how fast the glue sets up.Use a small amount to start the reaction at one spot and it will continue until the glue is set.The more ZIP KICKER you apply to the glue, the faster it will cure. Once the entire surface of the glue has been sprayed with kicker and the reaction has started, adding more kicker will not speed up the cure rate.In hard to reach areas or when trying to join parts that are not porous you can pre-treat one of the parts to be joined with ZIP KICKER, apply ZAP GLUE to the other and join the two together.When working with balsa wood spraying ZIP KICKER on the back side of thin sheeting can set the CA underneath.Even a part treated with ZIP KICKER and allowed to dry will speed the cure time of any CA that comes in contact with it.DO NOT SPRAY ZIP KICKER AROUND YOUR BOTTLES OF CA,A SMALL AMOUNT OF KICKER ON THE OPENING OF YOUR CA BOTTLE CAN AND WILL SET OFF AND HARDEN THE ENTIRE BOTTLE.Although ZIP KICKER will work on most materials and paints, always test on samples for compatibility.For critical applications test sample joints for the designed strength requirements.

     

    SKU: ZAPPT715
    €8.00
    inc. VAT

     72HR STOCK
  • ZAP-A-DAP-A-GOO

    ZAP-A-DAP-A-GOO

    ALL -PURPOSE ADHESIVE & SEALANT
    BONDS VIRTUALLY EVERYTHING
    DRIES CLEAR
    REMAINS FLEXIBLE
    WORKS WHERE OTHERS WON'T


    Uses:

    Strong flexible adhesive/sealer. Bonds anything. Bonds can be cut with a razor knife. ZAP GOO is an excellent adhesive for today's high tech composite airplane, boat, and car hobby products, and great for all of those fix-it, mend-it, seal-it, and stick-it jobs around the house. 1 fl oz tube. Works best on: Aluminum Ceramic China Clay Cloth Fiberglass Metal Most Plastics Plaster Pottery Rubber Wood

    SKU: ZAPPT12
    €6.90
    inc. VAT

     72HR STOCK

Manufacturers

Back