Carry Bags

Products


  • CARRYING BAG 2 PLASTIC DRAWERS

    CARRYING BAG 2 PLASTIC DRAWERS

    CARRYING BAG 2 CORRUGATED PLASTIC DRAWERS

    Team Corally - Carrying Bag is made to resist wear and endure all those trips to and from the track and beyond.
    The cover itself is made from a durable nylon thick enough to resist tearing and everyday use.
    Silk-screened printed factory team logos embody the bag throughout.

    The 2 corrugated plastic storage boxes keep your stuff secure and resist tearing and warping under the most extreme conditions. Each storage box includes an injection molded plastic handle insert and injection molded leading edge insert for easy sliding in and out of each box.

    Dimensions :

    • 540x335x325mm
    SKU: C-90240
    €41.90
    inc. VAT

     LOW STOCK
  • ETB Carry Bag for FPV and SmAll QUAD racers

    ETB Carry Bag for FPV and SmAll QUAD racers

    eTURBINE Carry Bag for mode 200-260 size racers, fit also other racers. very nice protection bag, must for every one

    SKU: ETB-PB1
    €27.00
    inc. VAT

     IN STOCK
    NEW
  • Fireproof LiPo carry and storage Safe Bag

    Fireproof LiPo carry and storage Safe Bag

    The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

    Size 23cm x 30cm - fits for 2 packs 6s 5000, however we recommend to use each pack with each bag.

    The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

    Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

    Instructions to use:

    Ensure that charger rate is properly set and polarity is correct

    1. Attach charging leads to battery
    2. Place battery in LiPo Safe towards the bottom
    3. Place LiPo Safe on non-flammable surface
    4. Route charge leads through vent at the top seam of the LiPo Safe
    5. Close top flap of LiPo Safe and press hook and loop closure fully closed
    6. Charge battery using proper charging practices
    7. Always practice extreme caution when charging and never leave a charging battery unattended

    Please check the Video showing the use of Lipo Safe

    SKU: SKU21065
    €12.00
    inc. VAT

     IN STOCK
  • Gens ace Lipo Safety pocket Box

    Gens ace Lipo Safety pocket Box

    The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

    Gens ace Lipo Safety Box - Dimensions: 185x60x75mm, Fit to packs up to 6s 5000.

    SKU: GENSLIPOBOX
    €9.90
    inc. VAT

     IN STOCK
  • Hardcase Rucksack backpack with insert foam for Yuneec Typhoon H

    Hardcase Rucksack backpack with insert foam for Yuneec Typhoon H

    Hardcase Rucksack with insert foam for Yuneec Typhoon H


    The stable protection for your Typhoon H. You keep certainly everything what on the way need and, besides, still comfortably on the back to carry.
    High-quality materials protect your Typhoon H against rough damages.
    However, all Inlays of every Typhoon H fit here there are two different versions.
    Version is laid out to this Hardcase for the rounded Inlay.
    But also the square version fits, here only little bit bigger columns exist.

    Specification:

    • Hardshell Backpack for Yuneec Typhoon H480
    • Good quality, durable, waterproof and shock-proof
    • Convenient and comfortable to take the case to outdoor or travelling
    • Insert foam for Typhoon H480 is included
    • Material: PC + Nylon
    • Net wight: 2.1kg
    • Backpack size: 35x54x46cm
    • Color: gray silver

    *illustrated Typhoon H incl. accessories are not a component of the product.

    SKU: ONE-39962-2
    €99.90
    inc. VAT

     LOW STOCK
  • Helicopter Carry Bag 450

    Helicopter Carry Bag 450

    Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round

    -450 size Heli carrying bag made of 620D Polyester.
    -Only bag on market holds450 Class helis with Blades and Canopy.
    -Water resistant PVC coating on back
    -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
    -Extra wide front opening , convenience to drop in heli without removing blades and canopy.
    -“Tail Boom” Zipper for even easier access to the Heli/Bag
    - Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting
    - Zipper coverage for extra protection against dust/water

    Color :Red-Yellow-Black

    Dimensions LxWxH:900 x 25 x35 mm for up to450 size

    SKU: HBAG450
    €39.00
    inc. VAT

     IN STOCK
  • Helicopter Carry Bag 500

    Helicopter Carry Bag 500

    Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round.

    -500 Heli carrying bag made of 620D Polyester.
    -Only bag on market holds up to 500 Class helis with Blades and Canopy.
    -Water resistant PVC coating on back
    -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
    -Extra wide front opening , convenience to drop in heli without removing blades and canopy.
    -“Tail Boom” Zipper for even easier access to the Heli/Bag
    -Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting.
    -Zipper coverage for extra protection against dust/water

    Color :Red-Yellow-Black

    Dimensions LxWxH: 1050x200x400mm for 500 size

    SKU: HBAG500
    €49.90
    inc. VAT

     IN STOCK
  • Helicopter Carry Bag 550

    Helicopter Carry Bag 550

    Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round.

    -550 Heli carrying bag made of 620D Polyester.
    -Only bag on market holds up to 550 Class helis with Blades and Canopy.
    -Water resistant PVC coating on back
    -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
    -Extra wide front opening , convenience to drop in heli without removing blades and canopy.
    -“Tail Boom” Zipper for even easier access to the Heli/Bag
    -Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting.
    -Zipper coverage for extra protection against dust/water

    Color :Blue-Yellow-Black

    Dimensions LxWxH: 1150x200x400mm for 550 size

    SKU: HBAG550
    €49.90
    inc. VAT

     IN STOCK
  • Helicopter Carry Bag 600

    Helicopter Carry Bag 600

    Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round

    -50 ( up to 600) size Heli carrying bag made of 620D Polyester.
    -Only bag on market holds 600 Class helis with Blades and Canopy.
    -Water resistant PVC coating on back
    -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
    -Extra wide front opening , convenience to drop in heli without removing blades and canopy.
    -“Tail Boom” Zipper for even easier access to the Heli/Bag
    -Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting
    -Zipper coverage for extra protection against dust/water

    Color :Red-Yellow-Black

    Dimensions LxWxH: 1400x250x500mm for up to 600 size

    SKU: HBAG600
    €55.00
    inc. VAT

     IN STOCK
  • LiPo Battery Fireproof Safety Guard  Bag  215 X 50 X 170MM

    LiPo Battery Fireproof Safety Guard Bag 215 X 50 X 170MM

    The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

    Dimensions:  215 X 50 X 170MM

    SKU: LIPOSAFE1
    €9.90
    inc. VAT

     IN STOCK
  • Lipo heating case with Lipo mounting plate and thermometer

    Lipo heating case with Lipo mounting plate and thermometer

    The heating is controlled via a digital thermometer which is visible and operable from the outside.
    If the temperature falls below the set temperature by 1 degree, the controller switches on again.
    The inside of the case is completely covered with insulating material. The floor slab was double insulated.
    It can be operated from the inside via a 3S Lipo, and from the outside via 2 existing 4mm sockets. (e.g. power supply, car battery)
    The cables that can be seen in the case are the temperature sensor and the internal power connection for 3S (no connector is installed on delivery, if you want to order HERE)
    The holding plates are screwed to the case and can be easily loosened at any time to thread new lipo straps.
    The color of the mounting plate may vary slightly.

    Specifications:

    • Operating voltage 11V - 14V
    • Economical 2A power at 12V
    • Inner dimensions (insulation already taken into account) 28cm X 20cm X 7cm
    • 2x 12V - 12Watt
    • 1x fan
    • Working area up to 70 degrees
    • Economical 2A electricity

    Contains:

    • 1 x Alu case
    • 1 x Lipo mounting plate
    SKU: SHCASE
    €186.00
    inc. VAT

     LOW STOCK
    NEW
  • Mikado Pocket bag black for VBar Control

    Mikado Pocket bag black for VBar Control

    Mikado Pocket bag black for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4927
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado Pocket bag brown for VBar Control

    Mikado Pocket bag brown for VBar Control

    Mikado Pocket bag brown for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4984
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado Pocket bag camouflage blue-grey for VBar Control

    Mikado Pocket bag camouflage blue-grey for VBar Control

    Mikado Pocket bag camouflage blue-grey for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4986
    €99.00
    inc. VAT

     72HR STOCK
  • Mikado Pocket bag camouflage blue-grey for VBar Control

    Mikado Pocket bag camouflage blue-grey for VBar Control

    Mikado Pocket bag camouflage blue-grey for VBar Control

    Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

    SKU: MIK-4987
    €99.00
    inc. VAT

     72HR STOCK
  • SAB Goblin 280 FIREBALL - MINI COMET Carry Bag

    SAB Goblin 280 FIREBALL - MINI COMET Carry Bag

    Instruction:

    • Use for Sab Goblin 280 ( FIREBALL - MINI COMET)

    Descriptions:

    • This red and black carry bag is specifically designed to hold and protect Goblin 280 helicopters, utilizing superior grade water resistant canvas.
    • The protection foams inside hold the helicopter securely in an upright position.
    • Extra thick padding ensures an excellent protection for your Sab Goblin helicopters.

    Important notice:

    • Please turn off your helicopter and radio before storing in bag to ensure safety during transport.
    SKU: HM062
    €54.00
    inc. VAT

     LOW STOCK
  • SAB Goblin 380 Carry Bag - Red

    SAB Goblin 380 Carry Bag - Red

    SAB Goblin 380 Carry Bag - Red

    Allows for safe transport and protects from minor bumps and scratches.

    Instruction:

    • Use for Sab Goblin 380
    Descriptions:

    This carry bag is specifically designed to hold and protect Goblin 380 helicopters, utilizing superior grade water resistant canvas.
    The protection foams inside hold the helicopter securely in an upright position.
    Extra thick padding ensures an excellent protection for your Sab Goblin helicopters.

    Dimensions:

    • Length: 80 cm
    • Width: 20 cm
    • Height: 25 cm

    Important notice:
    Please turn off your helicopter and radio before storing in bag to ensure safety during transport.

    SKU: HM056
    €64.90
    inc. VAT

     72HR STOCK
  • Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour

    Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour

    Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour

    This carry bag by SAB is specifically designed to hold and protect Goblin 630/700/770/Urukuay Competition/Speed/KRAKEN helicopters, utilizing superior grade water resistant canvas.

    The protection foams inside hold the helicopter in an upright position ensuring the best safety.

    Extra thick padding provides an excellent protection for your Sab Goblin helicopters.


    Dimension (In cm) LENGTH*HIGH*WIDTH
    Bag  140*42*24
    Inner pocket 35*18*9

    Important notice:

    Please turn off your helicopter and radio before storing in bag to ensure safety during transport.

    SKU: HM060
    €100.00
    inc. VAT

     72HR STOCK
  • Scorpion RC Travel Pit Bag carry case

    Scorpion RC Travel Pit Bag carry case

    • Compact size 540mm x 300mm x 525mm for 1/10th vehicle, but also for other machines, great to keep tools and parts in.
    • Extra tough fabric, handle and straps, heavy-duty stitching throughout
    • 3 x Composite inner drawers 470mm x 215mm x 140mm (inner size) with handles
    • Full-length composite inner liner
    • Removable tool organizer can stow drivers snug inside elastic loops and easily go from the bag to your workbench or pit space at the track
    • External pockets for extra storage
    • Net weight : 4.1kgs (shipping volume weight: 10kgs)
    SKU: RC_Travel_Pit_Bag
    €112.00

     LOW STOCK
  • Shockproof Bag Carry Case for Rc transmitter

    Shockproof Bag Carry Case for Rc transmitter

    Perfectly fits DJI ,Futaba Remote Control,JR , Radiolink, Spektrum, and many others

    Great for Chargers

    Specification:

    •  Dimensions: 31*20*11cm
    •  Weight: 0.7kg

    Package contents:

    1 X Transmitter Bag Case (Transmitter not included)

    SKU: TXBAG
    €35.00
    inc. VAT


Manufacturers

Back