FrSky

FrSky HORUS X12S carbon Transmitter tray

FrSky HORUS X12S carbon Transmitter tray

FrSky HORUS X12S carbon Transmitter tray

The desk is made of high quality, 2mm thick carbon composite material with support bars made of stainless steel, the radio can be worn optimally.

The transmitter tray is suitable for transport in any standard aluminum case.

This radio tray fits:

  • Horus (FrSky)

Specifications:

  • Material: carbon composite material
  • Dimensions: 340 x 170 x 125 mm
  • Weight: 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

*Transmitter Horus NOT included!

 

€89.90

Inc. VAT
FrSky R-XSR EU-LBT 16/8 ch Receiver with Telemetry

FrSky R-XSR EU-LBT 16/8 ch Receiver with Telemetry

FrSKy R-XSR LBT telemetry receiver. Has the same functionality as the normal XSR,  but at only 1/3 of the weight and the size it is much smaller. Offers 16 channels through S-BUS and 8 channels through (C)PPM.

FrSky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver. The R-XSR is a standalone receiver with all the functions of XSR, in addition, it’s almost 1/3 size and 1/3 weight of XSR receiver. Moreover, there redundancy function is integrated into this tiny receiver ensures the security, and the IPEX connector makes it more convenient for you to replace antennas.

Uses the smaller MHF4 type antennas. Spare antennes are available here.

Attention! New LBT (listen before talk) firmware for Europe. This product is compliant to the new ETSI guidelines. In order to use this receiver your transmitter has to run LBT firmware also.

  • Ultra mini size and light weight
  • Support telemetry and Smart Port enabled
  • Full range
  • Switchable SBUS/ CPPM signal output
  • Supports redundancy function
  • IPEX connector, replaceable antennas
  • Dimension: 16*11*5.4mm (L*W*H)
  • Weight: 1.5g
  • Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
  • Operating Voltage Range: 4~10V
  • Firmware Upgradable
  • Compatibility: FrSky X Series modules and radios in D16 mode

€24.90

Inc. VAT
FrSky R9 Slim+ Low Latency Long range receviver EU LBT

FrSky R9 Slim+ Low Latency Long range receviver EU LBT

As the second receiver of the series R9, R9 Slim+ includes all the benefits of the old receiver long-range R9. Besides that, the R9 Slim+ has the lowest latency and offers the best compatibility with all transmitters FrSky. The function of redundancy ensures the safety of your plane, and form tiny and the reduced weight allows it to be mounted in any device.

Technical Characteristics :

Dimension: 30 * 13.5 * 5mm (L × W × H)
Weight: 3.2 g
Number of channels: 6 channels (channel outputs conventional)
Working voltage range: DC 3.5 V ~ 10V
Operating current: 100mA @ 5V
Operation range: up to 10 km or more
Compatibility: module R9M

Features :

868MHZ (EU version)
small and conveniently put in place
Low-latency and high-precision
Function redundancy support
Smart Port enabled, and support transmission of telemetry data
Detection of battery voltage

  • Operating Voltage Range: 4.0~10V
  • Operating Current: 100mA@5V
  • Number of Channels: 6CH (1~6CH from conventional channel outputs)
  • Measurement Range: ±4g

 

€37.90

Inc. VAT
Quantity
FrSky R9 Slim+ OTA Low Latency Long range receviver EU LBT

FrSky R9 Slim+ OTA Low Latency Long range receviver EU LBT

The R9 Slim+ OTA receiver implements the ACCESS protocol and supports wireless firmware updates over the air making binding to receivers even easier. As well as the convenience of checking the current receiver firmware version.

The R9 Slim+ OTA is designed with dual antennas to improve signal strength. With a compact form factor design, it also features 6 PWM outputs, and this long range receiver with the flexibility to work with more external devices by incorporating the inverted SBUS and S.Port outputs.

As the second receiver of the series R9, R9 Slim+ includes all the benefits of the old receiver long-range R9. Besides that, the R9 Slim+ has the lowest latency and offers the best compatibility with all transmitters FrSky. The function of redundancy ensures the safety of your plane, and form tiny and the reduced weight allows it to be mounted in any device.

Technical Characteristics :

Dimension: 32 * 13.5 * 5mm (L × W × H)
Weight: 4.3 g
Number of channels:LBT Version: 6/16CH (Telemetry) / 6/16CH (No Telemetry)
Working voltage range: DC 3.5 V ~ 10V
Operating current: 100mA @ 5V
Operation range: up to 10 km or more
Compatibility: module R9M

Features :

868MHZ (EU version)
small and conveniently put in place
Low-latency and high-precision
Function redundancy support
Smart Port enabled, and support transmission of telemetry data
Detection of battery voltag

 

€44.90

Inc. VAT
Quantity
FrSKY Receiver antenna 150mm 2,4GHz for X4R/X4RSB/S6R

FrSKY Receiver antenna 150mm 2,4GHz for X4R/X4RSB/S6R

FrSKY Receiver antenna 150mm 2,4GHz for X4R/X4RSB/S6R

€3.00

Inc. VAT
Quantity
FrSky RX8R Pro 2.4G ACCST 8/16CH SBUS Telemetry Receiver EU-LBT

FrSky RX8R Pro 2.4G ACCST 8/16CH SBUS Telemetry Receiver EU-LBT

FR-SKY X8R 8 channels ACCST S-BUS Recveiver with antenna PCB

Specification:

  • SBUS Port (from 1 to 16 channels)
  • Smart Port (telemetry)
  • RSSI Port
  • PWM 8 channels
  • Posssibility of combine 2 X8R for 16 channels PWM (mode D16)
  • Size : 46.25x26.6x14.2mm
  • Wheight : 12.1g
  • Tension : 4.0V-10.0V
  • Amp use : 100mA
  • Range (>1.5km) 

€49.90

Inc. VAT
FrSky S.Port Tool Kit - STK

FrSky S.Port Tool Kit - STK

FrSky S.Port Tool Kit - STK

The S.Port Tool Kit or STK allows configuration of the S6R receiver from your computer.

€15.90

Inc. VAT
Quantity
FrSky S6R 6ch Receiver w/ 3-Axis Stabilization + Smart Port Telemetry

FrSky S6R 6ch Receiver w/ 3-Axis Stabilization + Smart Port Telemetry

FrSky S6R 6ch Receiver w/ 3-Axis Stabilization + Smart Port Telemetry

FrSky has combined the popular FrSky receiver technology with a super stable 3-axis system for fixed wing aircraft.
The S6R is based on the STM32 platform, with both receiver and flight control functions.
The S6R includes a three-axis gyroscope and three-axis accelerometer sensor module, with settings that are programmable via FrSky radios or the PC configuration tool (with FrSky STK).
Besides six-channel receiver function, the S6R also has stability augmentation, automatic level, crane, sideward flight, and shutdown functions of conventional airfoils.
Delta wing (flying wing) and V-tail models only support stability augmentation, automatic level and shutdown functions.

Features:

  • Built-in 3-axis gyro and 3-axis accelerometer sensor module
  • Has RSSI PWM output (0~3.3V) onboard
  • Built-in battery voltage sensor
  • Smart Port enabled

Compatibility:     

  • FrSky Taranis X9D/ X9D Plus/X9E/Horus X12S/XJT in D16 mode
  • S6R-EU only work with FrSky Tatanis X9D-EU/ X9D Plus-EU / X9E-EU / Horus X12S-EU / XJT-EU in D16 mode

Model:    

  • 6CH receiver with buil-in 3-axis gyro and 3-axis acceleration

Specifications:

  • Dimension: 47.42*23.84*14.7mm(L*W*H)
  • Weight: 12.1g
  • Operating Range: full range
  • Operating Voltage Range: 4.0~10V
  • Operating Current: 100mA@5V
  • Number of Channels: 6CH (1~6CH from conventional channel outputs)
  • Measurement Range: ±4g

 

€46.90

Inc. VAT
FrSky SBUS to CPPM Decoder with Pins

FrSky SBUS to CPPM Decoder with Pins

FrSky SBUS to CPPM Decoder with Pins

The FrSky SBUS & CPPM Decoder can be used to decode SBUS or CPPM signals and converts them to PWM signals for use with conventional analog and digital servos.  
This decoder is compatible with receivers that feature the SBUS port.
A few examples are the FrSky TFRSB 9TFR4SB, TFR8SB) and X series (X8R, X6R) receivers and the Futaba S.BUS receivers (R6208SB, and others) as well as tools like the FrSky SBUS Servo Channel Changer and the Futaba SBC-1.

Specification:

  • Channel Output Cable Lengths: 210mm
  • Total length: 350mm
  • Operating Temperature Range: -10-80℃
  • Operating Voltage Range: 4-10V
  • Compatibility for SBUS Connection Port: FrSky SBUS Servo Channel Changer, FrSky TFR8SB receiver, Futaba SBC-1 or Futaba S.BUS receivers (R6208SB, etc.)
  • Compatibility for PWM Connection Ports: digital servos

€16.90

Inc. VAT
Quantity
FrSky SCC Servo channel changer (SBUS, CPPM)

FrSky SCC Servo channel changer (SBUS, CPPM)

FrSky SCC Servo channel changer (SBUS, CPPM)

The FrSky Servo Channel Changer is a tool designed for setting the channel of FrSky S.BUS & CCPM compatible servos (e.g. D12MB, Futaba S.BUS servos and the FrSky S.BUS to PWM Decoder).
Simply connect the servo or decoder to the servo connection port of this device and a power source to the battery connection port.
Then use the roller switch to change and set the channel numbers accordingly.

Specification:

  • Dimensions: 48x67x22mm
  • Weight: 6.7g
  • Operating Voltage: 3~16V
  • Operating Temperature: -10~45°C
  • Compatibility: FrSky S.BUS & CCPM compatible servos, Futaba S.BUS servos, FrSky S.BUS to PWM Decoder

€39.90

Inc. VAT
Frsky Super 8 High Gain 3dBi Antenna for R9M / R9M Lite Module

Frsky Super 8 High Gain 3dBi Antenna for R9M / R9M Lite Module

The super 8 antenna from Frsky will make your R9M module even better and guaranteed to increase range over the stock duck antenna. Using a specialized antenna design in the figure of 8, this antenna is made to send your RF signals with high efficiency to improve your range and signal quality. TO fit this super 8 antenna, you simply just unscrew the stock one and screw the new one on via the SMA connector.

Specifications

Brand: FrSky

Item Name: FrSky Super 8 Antenna

Frequency Range: 860 – 930MHz ( LBT)

Peak Gain: 3dBi@900Mhz

Feed Impedance: 50 ohm

RF Cable: RG405 Semi-flexible

Connector: SMA internal screw hole

Compatible with modules: R9M / R9M Lite

Kit Contents

1 x FrSky Super 8 Antenna

€15.95

Inc. VAT
Quantity
FrSky Taranis X9D Plus 2.4GHz ACCST Radio Transmitter Only Silver Color

FrSky Taranis X9D Plus 2.4GHz ACCST Radio Transmitter Only Silver Color

FrSky Taranis X9D Plus 2.4GHz ACCST Radio Transmitter Only

This is the FrSky Taranis RC X9D Plus radio system. The radio also includes a Haptic Vibration Feedback System which provides an alternative feedback system to the existing voice and sound. If you are a club member this is a welcome addition without annoying your fellow club members. The Plus also includes a dual color LCD back-lit screen, allowing you to adjust from white to blue. Each radio ships with the newest firmware version to support the new haptic vibration feedback system.

Note: The SWR check of the transmitter antenna is no longer available.

When it comes to possibilities the Frsky TARANIS sets a new standard. FrSky is well known for their frequency hopping ACCST technology, that takes advantage of the entire 2.4GHz band, resulting in excellent range and reliability, they now offer their first full transmitter system.

The TARANIS mixes the  power of the “OPEN TX” open-source software with an unbelievable ergonomic case with 8 programmable switches, two twist knobs and two easy to get to lateral 'slider' pots, and not to mention the ultra-smooth quad bearing gimbals.

The TARANIS utilizes Voice Alerts from an internal speaker, versus just an annoying beeper. For things like; audible Count down timers, low voltage warnings, landing gear down warnings etc., just about anything can be programmed, you can even use your own voice. The SD card slot offers unlimited memory options and a USB port for upgrades even a headphone jack.

One of the best features of the TARANIS is its full telemetry capability, as well as RSSI signal strength feedback, there are 3 different programmable fail-safe modes and receiver lock, so no more crashes due to selecting the wrong model. If you have stock in other brand receivers or BNF’s, no worries the TARANIS has a JR style RF module slot, so you have the option of other brand modules such as the Orange DSM2/DSMX or Open LRS 433mhz module, or pop in another Frsky module to expand the transmitters capabilities even more with duel RF.

When you put it all together, between FrSky ACCST technology and the power of “OPEN TX” software and community, a ergonomic case with ultra-smooth smooth ball bearing gimbals and a large back-lit LCD with a included battery pack. You have versatility and power at an unprecedented value.

Features:

  •  Haptic Vibration Feedback System
  •  Adjustable Screen colors (White to Blue)
  •  Newest Firmware
  •  RSSI alarms (warns you of reception problems before it becomes an accident)
  •  16 channels (more when combined with external module)
  •  64 mixers, 9 flight modes
  •  16 custom curves with 3-17 points each, 32 logic switches
  •  Self-test of the transmitter antenna
  •  60 Model memory (expandable via a SD card)
  •  Audio Speech outputs
  •  USB and SD card slot for unlimited memory, and firmware upgrades, sound editing.
  •  Long range system capable of up to 3 times the range of current systems
  •  Quad bearing gimbals that are silky smooth
  •  State-of-the-art open source software (open TX)
  •  Super low latency for ultra-quick response (9ms)
  •  Large back-lit display
  •  Real-time data logging
  •  Receiver lock (program locked to aircraft)
  •  JR Style module bay for additional RF modules
  •  Processor: STM32 ARM Cortex M3 60MHz

Specifications:

  •  Model name: Taranis X9D Plus
  •  Number of Channels: up to 16
  •  Operating Voltage Range:6-15v (2s, 3s Lipos are acceptable)
  •  Operating Current: 260mA maximum (both RF module and backlit are on)
  •  Operating Temperature: -10~60C
  •  Backlit LCD Screen: 212*64 Monochrome
  •  Model Memories: 60 (expandable by SD card)
  •  Compatibility: FrSky X series, D series and V8-II series receivers
  •  Stick mode: Mode 2  (Left hand throttle)

Includes: 

    1x FrSky Taranis X9D PLUS 2019 ACCESS 2.4G transmitter

    1x Neck strap

    1x USB cable

€289.00

Inc. VAT
Quantity
Frsky Taranis X9D Plus SE 2019 Version EU-LBT 24CH OpenTX Transmitter Carbon

Frsky Taranis X9D Plus SE 2019 Version EU-LBT 24CH OpenTX Transmitter Carbon

The FrSky Taranis X9D Plus 2019 is a redesigned version with additions like an additional momentary button placed on the top left shoulder making it ergonomically friendly for DLG pilots to activate launch mode, and features a program scroll wheel making it even easier to navigate the menus. The upgraded MCU is used in conjunction with a redesigned mainboard that further increases the computing capability and increases the data storage. The upgrades not only improve the running of LUA scripts, it also optimizes overall performance like voice speech outputs.

The 2019 version uses the latest ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency with a highspeed module digital interface. Along with the new spectrum analysis function added to the OpenTX firmware, it is now possible to check the airwaves for RF noise. This version will give you a further improved experience based on the classic Taranis remote control. Additionally, tons of extra upcoming features that ACCESS brings will make this an ideal transmitter for any skill level.

The SE 2019 version is installed with the upgraded switches and M9 hall sensor gimbals and features the addition of a PARA wireless trainer function which makes them compatible with the FrSky Free Link App and AirLink S.

Main Features:

  • Classic Taranis form factor design
  • Easy launch momentary button
  • Program navigation button
  • Highspeed module digital interface
  • Installed with ACCESS protocol
  • Supports spectrum analyzer function
  • Supports SWR indicator warning
  • Haptic vibration alerts and voice speech outputs
  • Supports wired training function
  • Supports PARA wireless training function
  • Compatible with FrSky Free Link App and AirLink S via mobile devices
  • M9 hall sensor gimbal and upgraded switches

Specifications:

  • Dimension: 200*194*110mm (L*W*H)
  • Weight: 700g (without battery)
  • Operating system: OpenTX
  • Number of channels: 24 channels
  • Internal RF module: ISRMSX9
  • Operating voltage range: 6.5 – 8.4V
  • Operating current: 130mA@8.2V (Typ)
  • Operating Temperature: 10℃ ~ 60℃ (14℉ ~ 140℉ )
  • Backlit LCD resolution: 212*64
  • Smart Port, Micro SD card slot and DSC Port
  • Mini USB interface: supports 2S Libattery balancing charge
  • Model memories: 60 models (expandable by Micro SD card)
  • Compatibility: ACCST D16 and ACCESS receivers

Package Included:

  • Frsky Taranis X9D Plus SE 2019 Version 2.4G 24CH OpenTX Transmitter x 1
  • TX strap
  • EVA carry bag

€289.00

Inc. VAT
Quantity
FRSKY USB UPDATE dongle for X series receivers

FRSKY USB UPDATE dongle for X series receivers

FRSKY USB UPDATE dongle for X series receivers,This is the SPC cable that works with the FrUSB-3 upgrading cable and allows it to connect to Smart Port devices including XJT, X8R, X6R and smart port sensors.

€4.90

Inc. VAT
Quantity
FrSky X4R 4ch 2.4Ghz ACCST Receiver with Telemery

FrSky X4R 4ch 2.4Ghz ACCST Receiver with Telemery

FrSky X4R 4ch 2.4Ghz ACCST Receiver with Telemery

Features:

  • RSSI (PWM) output
  • Lighter weight and physically smaller than D8R-II & D6FR
  • Two selectable failsafe setting options - native failsafe or user programmable failsafe
  • External analog telemetry port (AD2)

 Specification:

  • Number of Channels: 4ch
  • Operating Voltage Range: 4V~10V
  • Operating Current: 100mA
  • Operating Range: Full Range (>1.5km)
  • Dimension: 40x22.5x6mm
  • Weight: 5.8g
  • Compatibility: FrSky X-series modual (XJT, etc) & Taranis X9D in D16 Mode)

*Note: Does not work with D-series module.

€36.00

Inc. VAT
FrSky XM+ Ultra Mini SBUS Receiver, ONLY 1.6g

FrSky XM+ Ultra Mini SBUS Receiver, ONLY 1.6g

FrSky XM+ Ultra Mini SBUS Receiver, ONLY 1.6g

Specification:

  • Dimension: 21.5x12x3.5mm(LxWxH)
  • Weight: 1.6g
  • Number of Channels: Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
  • Operating Voltage Range: 3.7~10V
  • Operating Current: 30mA@5V
  • Operating Range: FULL range
  • With RSSI output on board: Analog 0~3.3V
  • Firmware Upgradeable
  • Compatibility: FrSky D16 mode
  • No Telemetry

Includes:

  • 1 X FrSky XM+ SBUS Mini Receiver

€18.90

Inc. VAT
Quantity