FingWing

FingWing

 Producer of Air titan and Penguin FPV planes

Products


  • Finwing 390 Pan + Tilt Module

    Finwing 390 Pan + Tilt Module

     390* Versatile FPV Pan module + Tilt Module

    Includes: Pan Module + Pre-built Tilt Module, 1PCS Heavy Duty Titanize Metal Digital Servo, and 1PCS 17g servo

    •   Servo Pulse width range: 1000-2000
    •   Pan moving range: 3900-4000  (Full range)
    •   Tilt moving range: 600-900 (Full range)
    •   Control angle may be subject to your equipment wires. Please check carefully before flight to prevent binding.
    •   Compatible with Gopro2/Gopro3/Gopro water housing/ General FPV cameras

    Camera is not included

    SKU: 390PANTILT
    €69.00
    inc. VAT

     LOW STOCK
  • Finwing FPV Air Titan airplane Kit

    Finwing FPV Air Titan airplane Kit

    Presenting the Air Titan from Finwing! These planes live up to their name, as they sport a wingspan that’s over 2.5 meters (99.2") and a massive amount of space inside for equipment and batteries. We ordered batteries specifically to go with this plane, and we’d recommend going with the 6s 10000mAh or 12400mAh batteries linked in the product listing along with a 15x8” APC prop. On our prototype model, it weighed over 12 lbs fully loaded and still was able to fly vertically with their power system. Yes…a 2.5M 12lb FPV plane that can fly vertical. It’s an amazing sight!

    This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight.

    Available and ready to ship now at eRCMARKET.COM the best place to get ALL your FPV and RC equipment!

    This is the kit version and doesn't include motor, esc, servos and other electronics.


    Specifications:

    •   Wingspan: 2520MM/ 99.2inch
    •   Kits Airplane weight:2.4kg(5.3IB) including all reinforcement parts
    •   Extra Payload:3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg
    •   Customized Brushless Power system:
    •   Customized Motor for Airtitan:  M60K/ Power 1500W (not included)
    •   Testing static thrust: 5.5-6.0kg (6S, 15" Prop) (not included)
    •   Propeller recommend: 15*6 / 15*7 (not included)
    •   ESC: Advanced 80A OPTO (without Built-in BEC) (not included)
    •   External UBEC: 5V/6A,5.5V/6A or 6V/6A (Switchable) (not included)
    •   Material of fuselage and Wing: EPO​

    Does not include propeller. We recommend APC 15x7-8

    Recommended Servos:

    •   3PCS - 6kg Torque/CM  Metal gear servo (For Aileron and steerable landing gear)
    •   1PCS - 2.5kg Torque/CM Metal Gear Servo (Elevator)
    •   2PCS - 2.2kg Torque/CM Plastic Gear Servo (Rudder)
    Battery Recommendations:

      Recommend 5S-6S Lipo 10000mah  (7S or more cells lipo battery is not advised)

    Flight recommendations:

    • *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power"
    • Payload 3.0Kg equal to total flight weight approximately 5.5kg
    • Payload 4.0kg equal to total flight weight approximately 6.5kg
    • *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots
    •  The heavier flight weight the better flying skills required.
    High Quality Reinforcement :

    •   Main-wing: built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing
    •   Control surface of Aileron and Elevator: carbon tube reinforced, no need further DIY
    •   Horizontal stabilizer: 2PCS carbon tube reinforced
    •   Tail-boom :1 PCS Carbon Tube combined with thick Plywood reinforced
    •   Stainless steel servo horn and Aluminum clevis
    SKU: FAD1302KIT
    €269.00

     LOW STOCK
  • Finwing Penguin Wing Set

    Finwing Penguin Wing Set

    Includes main wings with pre-installed reinforcement tubes and servo extensions and wood bases for servo arms. Also includes horizontal stabilizer with carbon fiber tube for reinforcing, plus vertical stabilizer.  Does not include servos or servo arms.

    SKU: UPP002
    €49.00
    inc. VAT

     LOW STOCK
  • Universeye FPV Penguin Advance ARF Airplane with electronics

    Universeye FPV Penguin Advance ARF Airplane with electronics

    Universeye FPV Penguin Advance set with :  ESC60A,SBEC/ Motor M2815/ 4 servos.

    The first FPV specific airplane design with rolling takeoff capabilities, specially designed with canopy to accomodate camera, with pan/tilt device, and extra FPV equipment needed.

    • Large fuselage space for lots of equipment!
    • Transparent canopy design allowing you to protect your FPV camera from the weather while offering a crystal clear view.
    • FPV Camera on top,  and camera opening on the bottom of the fuselage (optional plastic dome available for bottom). Great for aerial photography, you can place a high definition camera on the bottom pointing down, or an HD camera can be mounted on the outside of the canopy for a clear view forward.
    • Front gear and tail gear design, runway take off and landing available.  Ground handling great with just rudder control.
    • Metal servo horns and strong hardware for strong and stable flight control
    • Large battery mounting area with hook and loop tape, plus side hook and loop mounts for easy equipment mounting.
    • Designed with great pre-made positions to place your GPS, video transmitter, radio transmitter
    • Rear mounted propeller is out of view and protected from those "rough" landings.

    Specifications:

    • Wingspan: 1720MM/67.7inch
    • Length: 1230MM/48.5inch
    • Wing Area: 36dm/3.9ft2 (Mainwing Area)
    • Motor: Brushless motor  D28mm, 1200-1300 KV- included
    • ESC:  50-60A
    • Servo: 3pcs 17g servo+ 1pcs 9g servo.
    • Battery: Li-Po 11.1V 3s 2400-5000mah ( Not included)
    • ARF Weight:  0.98kg/34.6oz. not including battery and your extra FPV devices
    • Static Thrust:  Motor 28 1.95Kg/69.0oz.
    • Max.flight weight more than 2.2kg/77.0oz
    • Payload:  600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight)
    • Material:  EPO Wing and fuselage/ Wooden rib reinforcement with aluminum alloy Pipe/Carbon Fiber pipe

    Shipping- Due the size of box we might limit the shipping option to certain destination, check your destination with us before ordering.

    SKU: FUP1205ADVARF
    €269.00
    inc. VAT

     LOW STOCK
  • Universeye FPV Penguin Kit

    Universeye FPV Penguin Kit

    Universeye FPV Penguin Kit, no servos, electronics/motorization

    The first FPV specific airplane design with rolling takeoff capabilities, specially designed with canopy to accommodate camera, with pan/tilt device, and extra FPV equipment needed.

    • Large fuselage space for lots of equipment!
    • Transparent canopy design allowing you to protect your FPV camera from the weather while offering a crystal clear view.
    • FPV Camera on top,  and camera opening on the bottom of the fuselage (optional plastic dome available for bottom). Great for aerial photography, you can place a high definition camera on the bottom pointing down, or an HD camera can be mounted on the outside of the canopy for a clear view forward.
    • Front gear and tail gear design, runway take off and landing available.  Ground handling great with just rudder control.
    • Metal servo horns and strong hardware for strong and stable flight control
    • Large battery mounting area with hook and loop tape, plus side hook and loop mounts for easy equipment mounting.
    • Designed with great pre-made positions to place your GPS, video transmitter, radio transmitter
    • Rear mounted propeller is out of view and protected from those "rough" landings.

    Specifications* need to complete.

    • Wingspan: 1720MM/67.7inch
    • Length: 1230MM/48.5inch
    • Wing Area: 36dm/3.9ft2 (Mainwing Area)
    • Motor: Brushless motor  D28mm, 1200-1300 KV
    • ESC:  50-60A
    • Servo: 3pcs 17g servo+ 1pcs 9g servo.
    • Battery: Li-Po 11.1V 3s 2400-5000mah
    • ARF Weight:  0.98kg/34.6oz. not including battery and your extra FPV devices
    • Static Thrust:  Motor 28 1.95Kg/69.0oz.
    • Max.flight weight more than 2.2kg/77.0oz
    • Payload:  600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight)
    • Material:  EPO Wing and fuselage/ Wooden rib reinforcement with aluminum alloy Pipe/Carbon Fiber pipe

    Shipping- Due the size of box we might limit the shipping option to certain destination, check your destination with us before ordering.

    SKU: FUP1202KIT
    €159.00
    inc. VAT


Manufacturers