Field Use tools

Field Use tools

Tools used on the field, mostly need items when you go to fly. Dont get caught without those.

Products


  • Pinion Gear remover

    Pinion Gear remover

    Pinion Gear remover for Small pinions
      SKU: EA019
      €15.00
      inc. VAT

       IN STOCK
    • Pitch gauge 250-500 size

      Pitch gauge 250-500 size

      Pitch gauge for Helis , measuring :+-12 degrees

      Fits Helis from 250-500 size

      SKU: EA-038
      €5.00
      inc. VAT

    • Pouch for Windmaster

      Pouch for Windmaster

      A water-resistant protective nylon bag is available for windmaster .The bag has a Velcro ® fastener for ease of opening and a practical belt loop enabling you to carry Windmaster with you at any time.

      SKU: SKU14757
      €8.00 €11.00
      inc. VAT

       IN STOCK
    • Pro Glow driver

      Pro Glow driver

      Glow plug wrench, features lightweight diamond cut grip with cap. Long reach, great for large engine heads and helicopters .Handle can be use to store glow plugs or screws and etc.

      SKU: HTPVA043
      €9.00
      inc. VAT

    • Professional Slim Wire Cutting Pliers Tool

      Professional Slim Wire Cutting Pliers Tool

      Great for jewelers, cutting, beading and electrical repair ,Designed to wires up to 3mm, for very precise work. a must to have tool in your fieldbox
      Has PVC grips for comfort holding and antislip
      Box joint construction maintains alignment of jaws, even under stress
      They measure approximately 100 mm long

      SKU: SKU51531
      €15.00
      inc. VAT

       LOW STOCK
    • Prolux Easy Glow Ignitor with Led Indicator

      Prolux Easy Glow Ignitor with Led Indicator

      Prolux Easy Glow Ignitor w/ Led Indicator

      Features:

      • High tecnology regulator application, output voltage: 1.5V
      • Switching transfer (low heat dissipation)
      • All kinds of 3.5-20V batteries can be used
        • NI-CD/NI-MH
        • LI-PO
        • LEAD-ACID
      • With LED indicator
      • Input reverse protection

      Operating Instructions:

      1. Connect the Easy-Glow to a DC 3.5V-20V power source.
      2. Squeeze the spring-loaded clip and place it onto the glow plug. Release clip to hold.
      3. When the LED turns red, the glow ignitor is working. If the LED is off, it means the battery connection is faulty or the glow plug is burned out.
      SKU: PX2201
      €20.95
      inc. VAT

       LOW STOCK
    • Prolux Li-po Glow Ignitor with Led Indicator & EU Charger

      Prolux Li-po Glow Ignitor with Led Indicator & EU Charger

      Prolux Li-po Glow Ignitor with Led Indicator & EU Charger

      Included charger will allow you to operate the Lipo Glow Ignitor from any 110V AC outlet.

      Features:

      • Charge rate: 230mA
      • LED will be solid red during charging till removing the batteries
      • LED will turn off as the batteries are full charged and there will be slight charge rate 10mA
      SKU: PX2202B
      €24.95
      inc. VAT

       IN STOCK
    • Prop Balancer

      Prop Balancer

      Quick, easy and inexpensive propeller balancer.

      Perfect for quick, accurate balancing at home or even at the field

      Fingertip Propeller Balancer 1 pc.

      SKU: HTPVT001
      €6.00
      inc. VAT

       IN STOCK
      NEW
    • Ratchet Glow plug wrench

      Ratchet Glow plug wrench

      The solution to those hard to reach glow plugs.

      Outstanding universal glow plug wrench for removal or installation. Rigid CNC aluminum construction, with one way bearing, and will virtually last forever.
      This essential tool comes with long and short adapters. Slip the adapter on one end to loosen the glow plug. Slip it on the other end to tighten.

      SKU: HTPT017
      €19.50
      inc. VAT

       LOW STOCK
    • RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

      RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

      RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

      This RC CellMeter-8 digital battery capacity checker is able to be used for LiPo LiFe Li-ion NiMH Nicd batteries.

      Features:

      • Support Battery Type:LiPo, LiFe, Li-ion, NiCd, NiMH
      • Servo Test Mode:Manual adjustment, Auto Matic, Neutral
      • Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz
      • Display Mode: Battery cell voltages, Total Voltages, Lowest cell voltage, Highest cell voltage, Voltage gap between highest cell voltage and Lowest cell voltage, Remaining battery capacity(%).
      • Discharge, Fast discharge

      Specifications:

      • Item size: 8.5 * 5 * 1.6cm
      • Item Weight: 40g
      • Package size: 10.5 * 10 * 2cm
      • Package Weight: 55g

      Package including:

      • Digital batteryt checker x1
      SKU: CELLM8
      €14.90
      inc. VAT

       IN STOCK
    • Remote Tachometer

      Remote Tachometer

      The Remote Tach can be used to remotely measure the rotor speed of a RC helicopter in flight.Taching is accomplished by viewing the helicopter though the viewing shutter and adjusting the speed of the shutter until the main blades of the Helicopter appear to stop.

      The shutter speed can be increased or decreased using the buttons at the back of the tach.
      The shutter speed range corresponds to 1000 to 3190 rpm of the helicopter head speed.The tach automatically shuts off after 30 seconds of inactivity. It will remember the last set RPM. After wakeup, allow 3 seconds for the shutter RPM to stabilize.

      RPM Range1000 – 3190 rpm
      Accuracy +/- 2.5rpm
      Operating Battery Drain 29mA @ 9V
      Sleep Battery Drain 70uA @ 9
      VSleep Time 30 Seconds
      Battery 6LR61 Alkaline 9V

      SKU: RCTA-001
      €86.00
      inc. VAT

       IN STOCK
    • SAB Tool Kit for RC Helicopters

      SAB Tool Kit for RC Helicopters

      First aid kit for your helicopter.

      Includes:

      • 1pc - Comfort Grip Hex tool 1.5
      • 1pc - Comfort Grip Hex tool 2.0
      • 1pc - Comfort Grip Hex tool 2.5
      • 1pc - Comfort Grip Hex tool 3.0
      • 1pc - SAB Tool Case

      SAB Comfort Grip Hex tools are our solution in matter of tools.

      Features:

      • Shaped for ideal torque
      • Adjustable Tip Length
      • Color coded for easy size recognize
      • Comfortable handle and strong grip
      SKU: HM054
      €49.90
      inc. VAT

       IN STOCK
      NEW
    • Savox tool 12 in 1

      Savox tool 12 in 1

      This is the Savox 12 in 1 tool that is made from quality materials and brings Savox attention to detail to RC tools.
      The driver includes 12 tools; Popular Hex, Phillips, slot, etc...

      Includes:

      • Hex - 1.5mm
      • Hex - 2mm
      • Hex - 5.5mm
      • Hex - 3mm
      • Hex - 1/16"
      • Hex - 3/32"
      • Slot - 1.5mm
      • Slot - 2.5mm
      • Phillips - #1 (PH00)
      • Phillips - #2 (PH0)
      SKU: ST-1001
      €25.90
      inc. VAT

       IN STOCK
    • Scorpion High Performance Tools Pack (10 pieces)

      Scorpion High Performance Tools Pack (10 pieces)

      Good news to all RC enthusiast, let us introduce to you: Scorpion High Performance Tools.

      We understand how important it is for RC enthusiast to have the tools with you guys on the field. Swapping parts on and off, getting the right parts and setting for your RC car, helicopter or airplane to get the best performance. Scorpion High Performance Tools is designed with RC enthusiast in our mind, the hollow core with aluminum alloy design allow us to make the tools very light weight without losing strength and durability.

      Included in the bag:

      • Scorpion High Performance Tools  1.5mm Hex Driver x1
      • Scorpion High Performance Tools  2.0mm Hex Driver x1
      • Scorpion High Performance Tools  2.5mm Hex Driver x1
      • Scorpion High Performance Tools  3.0mm Hex Driver x1
      • Scorpion High Performance Tools  4.0mm Hex Driver x1
      • Scorpion High Performance Tools  5.5mm Nut Driver x1
      • Scorpion High Performance Tools  7.0mm Nut Driver x1
      • Scorpion High Performance Tools  4.0mm Flat Screwdriver x1
      • Scorpion High Performance Tools  5.0mm Phillips Screwdriver x1
      • Scorpion High Performance Tools  2.0mm Round Head Hex Driver x1

      Specifications:

      Tools bag:

      • 600 Denier Polyester
      • #5 Zipper
      • Velcro Construction
      • PVC Binding
      • Included 10 pcs tools
      • Product Size: 235 x 110 x 30mm (folded)

      Tools:

      • Ultra light weight hollow core design
      • Handle made by Aluminum Alloy
      • Screwdriver head made by HSS(High Speed Steel), build for wear and distortion
      • Anodized aluminum handles with knurled grip
      • Professional quality

      Weight including packaging:

      • 560g
      SKU: TOOLS_PACK_10
      €119.00
      inc. VAT

       IN STOCK
      NEW
    • Simple Link tool

      Simple Link tool

      Great Low cost tool, adjusting the Ball links without investing lots of force.Hex ends will allow to use with spanners for easier moveSet of 2

      SKU: HTT014
      €3.00 €4.00
      inc. VAT

       IN STOCK
    • Smart Guard battery-tester

      Smart Guard battery-tester

      This device will know eveyr battery you connect to it , it shows kind of battery ( LiPo , LiFe , NimH , Nicd) and give you information about the charging status of every single cell ( LiPo LiFe)in the pack .
      It shows voltage and capacity of each batterypack and even each single cell ( LiPo, LiFe). It works from LIXX 2-7 cells ( 7,4-26V LiPo and LiFe) and 4 - 7 cells NiCd and NiMH to check a receiver battery).

      SKU: FS-BC01
      €20.00
      inc. VAT

       72HR STOCK
    • Training Gear 300-450

      Training Gear 300-450

      A must for a pilot, save your heli from unwanted crashes , excellent item for beginners

      An enlarged landing gear is a real advantage for the first attempts at learning to hover. It stops the tendency for the model to tip-over when landing at an angle or when travelling forward. The large balls, mounted at the ends of the struts, also improves the visibility of the model orientation in flight. The landing gear is designed for mini and middle sized models.

      SKU: RB-S2709
      €9.90 €13.00
      inc. VAT

       IN STOCK
    • Wiha Inomic VDE Side cutter

      Wiha Inomic VDE Side cutter

      Inomic Cutter From Wiha -The Ergonomic Choice For Cutter, insulated, powerfull, and lifetime warranty

      • Advanced Ergo Design, Tool Head Mounted at Optimal 23º Off set 
      • For Natural Hand & Wrist Alignment, Reduces Fatigue & Injury Risk
      • Grip is Low Weight Fiber-Glass Reinforced With Soft Palm Zone
      • Heads Are Drop Forged Premium Chrome Vanadium Tool Steel
      • Long Life Induction Hardened Cutting Edges and Jaws
      • Each Tool Has a Convenient Jaw Lock and Grip Return Spring
      • Inomic Meets ASTM, CSA, EN/IEC, NFPA, OSHA Insulation Specs
      • Professional Quality, Design Award Excellence
      • Made By Wiha Germany
      SKU: WI-32854
      €27.00
      inc. VAT

       LOW STOCK

    Manufacturers

    Back