Due the bad storage conditions in one of our warehouses, some of our bags got dirty. there is Absolutely no damage to zipper or material, its pure something can be washed.
We want you to benefit from it, so we offer the bags at Very special discount. Bear in mind its a limited offer.
Each bag is guarantied and will be checked again before shipping.
See choice of sizes.
Some of models can be delivered in RED-YELLOW-BLACK, or BLUE-YELLOW-BLACK, we can not guaranty the color, but in most cases it will be RED-YELLOW-BLACK
Handle and removeable shoulder strap High quality aluminium case for 300-400 size helis
Internal measurements - 685mm (L) x 275mm (W) x 190mm (H)
Removeable pre-cut foam inserts
Two clip locks
THE case for your DJI Phantom Copter.
The prefabricated foam insert fits the DJI Phantom 3, DJI Phantom 2, DJI Phantom 2 Vision and the DJI Phantom 2 Vision+ (Props have to be removed).
Carry case Large for your DJI Phantom 2 & 3 Multicopter
The case for your DJI Phantom Copter.
Features:
The prefabricated foam insert fits the DJI Phantom 2, DJI Phantom 2 Vision and the DJI Phantom 2 Vision+. NOW: Also available for the new DJI Phantom 3!
The necessary accessories such as a 7 inch monitor or the GoPro Actioncam also find space in this case
THE case for your DJI Mavic 2 Pro or Zoom + accessories! Thanks to its prefabricated foam insert it provides sufficient space for your DJI Mavic 2 and the accessories like the Fly More Kit and up to 4 ND-Filter. It is possible to insert and remove the batteries, when the foam for the batteries is set in. As a bonus, it is possible to charge the batteries in the case directly. It is very important to remove the foam for the batteries during the charging process. The optimal charging temperature for the power supply is 5-40°C. For higher temperatures it is recommended to use the power supply outside the inlay. A further point is the removable foam insert inside the spare compartment. If you have a bigger accessory just take out the foam to get more space. The lid pocket offers space for documents like drone insurance.
case shell made of polypropylene (PP)
certified with the STANAG 4280, DEF STAN 81-41 and ATA 300 standards
Waterproof Backpack for DJI Phantom You can take your DJI Phantom Quadcopter anywhere with this versatile waterproof lightweight backpack. Made with extra durable cloth it has adjustable straps to ensure a perfect fit. Low priced it is a must for any Phantom Owner
Features: Durable wear resistant Unique design creates an eye-catching visual effect. Durable and strong enough, keep your DJI RC toy secure. Large capacity, very useful and convenient to use. Unique adjustable shoulder strap design will give your shoulder comfortable touch. This backpack is good for outdoor use. Will not shrink or fade after washing, wear-resistant and waterproof. With side pockets for storing and holding mobile phones, cards or other RC accessories.
Description:
Item name: Waterproof Backpack
Color: black
Size: 48cm x 37cm x 21cm
Weight: 1700g
Usage: for Phantom 2 Vision+, Phantom 2 Vision, Phantom 2, Phantom 1 and Phantom FC40.
Extremely solid carrying case for the DJI Phantom II and the Phantom II Vision.
In the carrying case, you can store spare propellers, 3 batteries (one of them in the aircraft), the battery charger, the video goggles and additional parts at the same time.
Dimensions (inside): 550x460x256mm
Dimensions (outside): 620x520x275mm
Weight (empty): 7,55kg
UV proof, waterproof and tested at temperatures from -40 to +80 °C
enough space for your DJI Mavic Mini Fly More Combo. 30 year guarantee
The outdoor.case 2000 with inlay for DJI Mini 2 offers despite its compact size, space for a DJI Mini 2 or the extensive DJI Mini 2 Fly More Combo and additional equipment. Thanks to the prefabricated inlay, it is possible to safely transport 3 batteries (one of them in the copter) in the case. To transport the DJI Mini 2 Fly More Combo, the foam insert included in the delivery must be removed and replaced with the 3-compartment charging cradle. This increases the transport of the maximum number of batteries to 4 batteries. In order to ensure a faster deployment of the drone, the remote control with mounted sticks in the case is taken into account. A universal compartment (158 x 108 x 46 mm) offers additional storage space for other accessories, such as USB plugs, spare propellers and charging cables.
Extremely stable case: housing made of polypropylene (PP)
Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round
-450 size Heli carrying bag made of 620D Polyester. -Only bag on market holds450 Class helis with Blades and Canopy. -Water resistant PVC coating on back -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection. -Extra wide front opening , convenience to drop in heli without removing blades and canopy. -“Tail Boom” Zipper for even easier access to the Heli/Bag - Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting - Zipper coverage for extra protection against dust/water
Color :Red-Yellow-Black
Dimensions LxWxH:900 x 25 x35 mm for up to450 size
Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round.
-500 Heli carrying bag made of 620D Polyester. -Only bag on market holds up to 500 Class helis with Blades and Canopy. -Water resistant PVC coating on back -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection. -Extra wide front opening , convenience to drop in heli without removing blades and canopy. -“Tail Boom” Zipper for even easier access to the Heli/Bag -Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting. -Zipper coverage for extra protection against dust/water
Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round.
-550 Heli carrying bag made of 620D Polyester.
-Only bag on market holds up to 550 Class helis with Blades and Canopy.
-Water resistant PVC coating on back -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
-Extra wide front opening , convenience to drop in heli without removing blades and canopy.
-“Tail Boom” Zipper for even easier access to the Heli/Bag
-Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting.
-Zipper coverage for extra protection against dust/water
Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round
-50 ( up to 600) size Heli carrying bag made of 620D Polyester. -Only bag on market holds 600 Class helis with Blades and Canopy. -Water resistant PVC coating on back -9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection. -Extra wide front opening , convenience to drop in heli without removing blades and canopy. -“Tail Boom” Zipper for even easier access to the Heli/Bag -Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting -Zipper coverage for extra protection against dust/water
Color :Red-Yellow-Black
Dimensions LxWxH: 1400x250x500mm for up to 600 size
Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour
This carry bag by SAB is specifically designed to hold and protect Goblin 630/700/770/Urukuay Competition/Speed/KRAKEN helicopters, utilizing superior grade water resistant canvas.
The protection foams inside hold the helicopter in an upright position ensuring the best safety.
Extra thick padding provides an excellent protection for your Sab Goblin helicopters.
Dimension (In cm) LENGTH*HIGH*WIDTH
Bag 140*42*24
Inner pocket 35*18*9
Important notice:
Please turn off your helicopter and radio before storing in bag to ensure safety during transport.
Good news to all RC enthusiast, let us introduce to you: Scorpion High Performance Tools.
We understand how important it is for RC enthusiast to have the tools with you guys on the field. Swapping parts on and off, getting the right parts and setting for your RC car, helicopter or airplane to get the best performance. Scorpion High Performance Tools is designed with RC enthusiast in our mind, the hollow core with aluminum alloy design allow us to make the tools very light weight without losing strength and durability.
Included in the bag:
Scorpion High Performance Tools 1.5mm Hex Driver x1
Scorpion High Performance Tools 2.0mm Hex Driver x1
Scorpion High Performance Tools 2.5mm Hex Driver x1
Scorpion High Performance Tools 3.0mm Hex Driver x1
Scorpion High Performance Tools 4.0mm Hex Driver x1
Scorpion High Performance Tools 5.5mm Nut Driver x1
Scorpion High Performance Tools 7.0mm Nut Driver x1
Scorpion High Performance Tools 4.0mm Flat Screwdriver x1
Scorpion High Performance Tools 5.0mm Phillips Screwdriver x1
Scorpion High Performance Tools 2.0mm Round Head Hex Driver x1
Specifications:
Tools bag:
600 Denier Polyester
#5 Zipper
Velcro Construction
PVC Binding
Included 10 pcs tools
Product Size: 235 x 110 x 30mm (folded)
Tools:
Ultra light weight hollow core design
Handle made by Aluminum Alloy
Screwdriver head made by HSS(High Speed Steel), build for wear and distortion
