DJI 1345s Quick-Release Propellerss for Inspire 1 is a two pack that features one clockwise (CW) and one counterclockwise (CCW) prop. The props include the Quick Release Rotor Adapter. This part screws onto the motor and remains attached to the aircraft. The props can then be snapped on or off as needed without being unscrewed. Please refer to the user guide to ensure that you replace the CW prop with a new CW prop and a CCW prop with a CCW prop. Improper installation will lead to the props becoming unscrewed in-flight. These are specifically for the DJI Inspire 1 quadcopter and should not be installed on other aircraft.
Each Pack Contains Two Propellers
One CW Self-Tightening Propeller
One CCW Self-Tightening Propeller
Compatible with DJI Inspire 1 Quadcopter
Requires Quick Release Rotor Adapter
Note: These rotors require the Quick Release Rotor Adapters (available separately), which must be installed before installing the props. Additionally, the self-tightening props cannot be used with the Quick Release Rotor Adapters in place.
DJI's Focus is a wireless follow focus that integrates natively with the Zenmuse Z5 series of camera/gimbals systems and can be mounted on rigs equipped with 15mm or 19mm rods - including the Ronin and Ronin-M gimbals. The Focus features a handheld remote controller (transmitter) with a focus knob to give to the feel of a traditional mechanical follow focus. The wireless system sports a range of up to 330' line-of-sight with a delay of only 14ms.
Control accuracy of ±0.002°
Self-contained drive unit combines brushless motor and receiver in a single module - simplifying installation and requiring only a single power source
Use with Inspire 1 Quadcopter carrying Zenmuse X5 or X5R camera
Adjustable endpoints - ideal for lenses, such as photo lenses, that lack "hard" stops
Programmable focus points and other parameters adjustable through controller menu
OLED display on controller for menu access and status display
Compatible with DJI's Ronin and Ronin-M gimbals
Works with third-party gimbals or rigs that have 15mm or 19mm rod support
Dual communication ports for future upgrades
Built-in rosette for greater mounting flexibility
When in flight, your remaining battery power is shown live on the dji app, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back. The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your DJI Inspire 1 in the air and flying for years to come.
Name - Intelligent Flight Battery
Model - TB47
Capacity - 4500 mAh
Voltage - 22.2 V
Battery Type - LiPo 6S High voltage battery
Energy - 99.9 Wh
Net Weight - 570 g
Operating Temperature Range -20° to 40° C
Storage Temperature Range - Less than 3 months: -20° to 45° C
Quick Release Props from DJI are required by the 1345s Quick-Release Props. The adapters screw onto the motor, where they permanently reside. They allow the props to be toollessly twisted on or off.
The adapters work with the Inspire 1 motors as well as the motors for the E800 Tuned Propulsion System.
A pair is included, one for a clockwise (CW) and one for a counterclockwise (CCW) motor.
When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera.
The Inspire 1 Pro Vibration Absorbing Board is made from shock-resistant magnalium which effectively absorbs vibrations.
Please refer to the DJI Tutorial video for how to mount the new vibration absorbing board.
(The Zenmuse X5 Vibration Absorbing Board is included in the Inspire 1 Pro kit. It is not included with the Zenmuse X5 kit and needs to be purchased separately.)