Digital Servos

Digital Servos

You'll find Savox , alturn, Futaba, Robbe-  Standard Digital High Torque Titanium Gear Servos in our range

Products


  • Jeti Digital Servo High voltage & torque DSHV 3D13T (13kg)

    Jeti Digital Servo High voltage & torque DSHV 3D13T (13kg)

    Jeti Digital Servo High voltage & torque DSHV 3D13T (13kg)

    The J3D13T is a precise full-metal digital servo for large models. "Mini" size.

    • High torque and speed
    • High voltage
    • Precision metal gearbox
    • Ball bearings
    • Watter proof
    • Aluminium case

    Specification:

    • Weight [g]     39,7
    • Supply Voltage [V]     3.8 > 8.4
    • Torque (6V) [kg/cm]     10.5
    • Torque (7.4V) [kg/cm]     13
    • Torque (8.2V) [kg/cm]     14
    • Speed (6V) [s]     0.17
    • Speed (7.4V) [s]     0.14
    • Speed (8.2V) [s]     0.13
    • Max. current (7.4V) [A]     2.4
    • Motor     Coreless DC
    • Waterproof     Yes
    • Ball bearings     2
    • Gearbox material     metal
    • Compatible horn (Ø6mm)     Futaba
    SKU: DSHV-3D13T
    €129.00
    inc. VAT

     72HR STOCK
  • Jeti Digital Servo High voltage DSHV 4A18.5T (18.5kg)

    Jeti Digital Servo High voltage DSHV 4A18.5T (18.5kg)

    Jeti Digital Servo High voltage DSHV 4A18.5T (18.5kg)

    The J4A18.5T is a precise full-metal digital servo for large models. Standard size.

    • High torque and speed
    • High voltage
    • Precision metal gearbox
    • Ball bearings
    • Watter proof
    • Aluminium case

    Specification:

    • Weight [g]     74
    • Supply Voltage [V]     4.8 > 8.4
    • Torque (6V) [kg/cm]     15
    • Torque (7.4V) [kg/cm]     18.5
    • Torque (8.2V) [kg/cm]     20.5
    • Speed (6V) [s]     0.10
    • Speed (7.4V) [s]     0.08
    • Speed (8.2V) [s]     0.07
    • Max. current (7.4V) [A]     5.8
    • Motor     BLCD
    • Waterproof     Yes
    • Ball bearings     2
    • Gearbox material     metal
    • Compatible horn (Ø6mm)     Futaba
    SKU: DSHV-4A18T
    €229.00
    inc. VAT

     72HR STOCK
  • Jeti Digital Servo High voltage HV DSHV 3D8.5T (8.5kg)

    Jeti Digital Servo High voltage HV DSHV 3D8.5T (8.5kg)

    Jeti Digital Servo High voltage HV DSHV 3D8.5T (8.5kg)

    The J3D8.5T is a precise full-metal digital servo for large models. "Mini" size

    • High torque and speed
    • High voltage
    • Precision metal gearbox
    • Ball bearings
    • Watter proof
    • Aluminium case

    Specification:

    • Weight [g]     39,7
    • Supply Voltage [V]     3.8 > 8.4
    • Torque (6V) [kg/cm]     6.9
    • Torque (7.4V) [kg/cm]     8.5
    • Torque (8.2V) [kg/cm]     9.5
    • Speed (6V) [s]     0.12
    • Speed (7.4V) [s]     0.10
    • Speed (8.2V) [s]     0.09
    • Max. current (7.4V) [A]     2.4
    • Motor     Coreless DC
    • Waterproof     Yes
    • Ball bearings     2
    • Gearbox material     metal
    • Compatible horn (Ø6mm)     Futaba
    SKU: DSHV-3D8T
    €129.00
    inc. VAT

     72HR STOCK
  • Jeti Digital Servo High voltage HV DSHV 4A23T (23kg)

    Jeti Digital Servo High voltage HV DSHV 4A23T (23kg)

    Jeti Digital Servo High voltage HV DSHV 4A23T (23kg)

    The J4A23T is a precise full-metal digital servo for large models. Standard size.

    • High torque and speed
    • High voltage
    • Precision metal gearbox
    • Ball bearings
    • Watter proof
    • Aluminium case

    Specification:

    • Weight [g]     74
    • Supply Voltage [V]     4.8 > 8.4
    • Torque (6V) [kg/cm]     18.5
    • Torque (7.4V) [kg/cm]     23
    • Torque (8.2V) [kg/cm]     25
    • Speed (6V) [s]     0.15
    • Speed (7.4V) [s]     0.12
    • Speed (8.2V) [s]     0.11
    • Max. current (7.4V) [A]     5.8
    • Motor     BLCD
    • Waterproof     Yes
    • Ball bearings     2
    • Gearbox material     metal
    • Compatible horn (Ø6mm)     Futaba
    SKU: DSHV-4A23T
    €229.00
    inc. VAT

     72HR STOCK
  • KO PROPO PDS-2413 ICS

    KO PROPO PDS-2413 ICS

    Low profile programmable digital servo.

    Speed: 0.10 sec /60
    Torque: 118 oz-inch (8.5Kg-cm)
    Size : 41x21x25.4mm
    Weight : 44.8gr

    SKU: RCM18695
    €89.00
    inc. VAT

     LOW STOCK
  • KST DS565X Metal Coreless Digital Tail Servo for 450-500 RC Helicopter

    KST DS565X Metal Coreless Digital Tail Servo for 450-500 RC Helicopter

    KST DS565X Metal Coreless Digital Tail Servo for 450-500 RC Helicopter

    Specification:

    • Operating Voltage: DC 6.0V-8.4V
    • Size: 35.50*15*32.70mm

    Torque:

    • 4.00Kg.cm@6.0V
    • 5.00Kg.cm@7.4V
    • 6.00Kg.cm@8.4V

    Speed:

    • 0.06sec/60°@6.0V
    • 0.05sec/60°@7.4V
    • 0.04sec/60°@8.4V

    Weight: 40g
    Working Frequence: 760us/560Hz,
    Motor: Φ15mm Coreless  Ball Bearing: 2BB

    Package included:

    • 1 x DS565X servo
    • 1 x Direct servo arm
    • 1 x Circle pan servo arm
    • 1 x Cross servo arm
    • 1 x Plum servo arm
    • Screws and washers
    SKU: KST-DS565X
    €59.90
    inc. VAT

     IN STOCK
  • KST Lynx DS215MG / DS213X Servo Combo Pack

    KST Lynx DS215MG / DS213X Servo Combo Pack

    We offer one of the best Full (Cyclic + Tail) Servo Combo for your OXY3 and 4.

    3 x DS215MG-V3 for Cyclic

    1 x DS213X for Tail

     

    DS 215MG-V3 Servo Specification:

    •  Operating Voltage: 4.5-7.4V
    •  Dimension: 22.90 * 12.27 * 27.30mm
    •  Torque: 2.50kg/cm - 4.8V   
    •           3.10kg/cm - 6.0V
    •           3.70kg/cm - 7.4V
    •  Speed: 0.07sec / 60° - 4.8V
    •          0.06sec / 60° - 6.0V
    •          0.05sec / 60° - 7.4V
    •  Motor: 12mm Coreless
    •  Working Frequence: 1520us / 333Hz
    •  Weight: 21g
    •  Ball Bearing: 2BB
    •  Originally Made in China by KST

     

    DS 213X Servo Specification:

    •  Operating Voltage: 6.5 - 7.4V
    •  Dimension: 22.90 * 12.27 * 24.50mm
    •  Torque: 3.00kg/cm - 6.5V
    •          3.60kg/cm - 7.4V   
    •                           
    •  Speed: 0.06sec / 60° - 6.5V
    •         0.04sec / 60° - 7.4V
    •  Motor: 12mm Coreless
    •  Working Frequence: 760us / 560Hz
    •  Weight: 21g
    •  Ball Bearing: 2BB
    •  Originally Made in China by KST

    IMPORTANT NOTE:
    DS213X Servo MUST is 760us Pulse Servo with 560 Hz Frequncy, wrong FBL Set Up can damage the servo.
    FBL Tail Servo Pulse and if request Frequency MUST set corectly before connect the Servo.


    PACKAGE LIST:

    • 3 X KST Lynx DS215MG-V3 Servo
    • 1 X KST Lynx DS213X - 760us Tail Servo
    • 8 x Oxy 3/4 Servo Arm
    SKU: LX2651
    €115.00
    inc. VAT

  • KST Lynx DS215MG-V3 Servo (3pcs)

    KST Lynx DS215MG-V3 Servo (3pcs)

    We offer one of the best Cyclic Servo Combo for your OXY3 and 4.

    3 x DS215MG-V3

    DS 215MG-V3 Servo Specification:

    • Operating Voltage: 4.5-7.4V
    • Dimension: 22.90 * 12.27 * 27.30mm
    • Torque:  2.50kg/cm 4.8V   
    •                3.10kg/cm 6.0V
    •                3.70kg/cm 7.4V
    • Speed:   0.07sec / 60° 4.8V
    •                0.06sec / 60° 6.0V
    •                0.05sec / 60° 7.4V
    • Motor: 12mm Coreless
    • Working Frequence: 1520us / 333Hz
    • Weight: 21g
    • Ball Bearing: 2BB
    • Originally Made in China by KST

     

    PACKAGE LIST:

    • 3 X KST Lynx DS215MG-V3 Servo
    • 6 x Oxy 3/4 Servo Arm
    SKU: LX2649
    €89.00
    inc. VAT

     72HR STOCK
  • KST Micro Cyclic Servo MS325 with Hall Effect (Contactless) Sensor

    KST Micro Cyclic Servo MS325 with Hall Effect (Contactless) Sensor

    KST Micro Cyclic Servo MS325 with Hall Effect (Contactless) Sensor

    No more scratchy, sketchy potentiometers. Hall effect sensors are taking their place.  Many of the glitches and quirks we face from our servos are due to the potentiometers becoming dirty or plain old, worn out. So here we have the new MS servo series from KST with its hall effect sensor and a carefully aligned magnet taking the place of the potentiometer. With this no contact, position sensing system we are a step closer to the day when sketchy, twitchy, double centering servos, will be no more.  

    Reliability and precision are the name of the game with these alloy cased, hardened steel geared, digital coreless servos. Its very high specs is appropriate for many high demand uses including high speed gliders, helicopters and sport planes.

    The KST servos are very high quality and will impress you. Great value for the price!

    Perfect cyclic servo for 450-480 class helicopter like Align T-Rex 450L, Gaui X3 or Goblin 380

    Features:

    • Contactless position sensor servo
    • Coreless motor
    • Hardened steel gear

    Specification:

    • Operation Voltage: DC6.0V-8.4V
    • Size: 23x12x27.50mm

    Torque:

    • 3.8Kg.cm@6.0V        
    • 4.6Kg.cm@7.4V          
    • 5.2Kg.cm@8.4V

    Speed:

    • 0.09sec/60°@6.0V     
    • 0.08sec/60°@7.4V      
    • 0.07sec/60°@8.4V

    Weight:20g

     

    SKU: KST-MS325
    €45.00
    inc. VAT

     LOW STOCK
  • KST MS589 Coreless Digital Servo

    KST MS589 Coreless Digital Servo

    The new KST MS589 is a very powerful high voltage contactless servo suitable for helicopter cyclic and all fixed wing aplications. At 15 mm thick and 38 g weight it is reasonably small and light, considering its excellent 9.2 kg.cm of torque and 0.08 sec/60° speed.

    Specifications :

    • Body dimensions: 35.5 mm wide x 15.0 mm thick x 32.5 mm high
    • Stall torque (6V): 6.5 kg.cm
    • Stall torque (7.4V): 8.0 kg.cm
    • Stall torque (8.4V): 9.2 kg.cm
    • Weight: 38.0 g     
    • Lead length: 21 cm
    • Operating speed (6V): 0.10 sec/60°
    • Operating speed (7.4V): 0.09 sec/60°
    • Operating speed (8.4V): 0.08 sec/60°
    • Operating voltage: 6.0V to 8.4V
    • Bearings: 2 ball bearing
    • Gear material: Hardened steel
    • Case material: Aluminium alloy
    • Motor type: Coreless
    • Working frequency: 333 Hz
    • Digital: Yes
    • Programmable: No
    • Position feedback: Contactless/magnetic
    • Operating temperature: -20 to +65 ºC
    SKU: KST-MS589
    €75.00
    inc. VAT

    NEW
  • KST X20-1035 HV Brushless Servo - 12Kg.cm 0.03s 70g 20mm

    KST X20-1035 HV Brushless Servo - 12Kg.cm 0.03s 70g 20mm

    KST X20-1035 HV Brushless Servo - 12Kg.cm 0.03s 70g 20mm

    The KST X20-1035 HV Brushless servo represents a new revolution in servo design. Being brushless it offers significantly longer life operation. With a far superior power to weight ratio and reduced motor burn-out susceptibility.

    It is an amazingly fast yet powerful and precise metal cased high voltage servo designed to be run directly from a 2S LiPo without needing a regulator.

    KST also advise unlike any other servo, the X20 generates no counter EMF in any working conditions. It has an all-new design of circuit board, so your heli flybarless system and receiver will not be interfered with and will not display any weird behavior as a result.

    The KST X20-1035 HV is approx standard size and has an output spline the same as similar Futaba servos, so many compatible output arms are available. Wirh an incredible 0.030 sec/60° speed and impressive 12 kg.cm torque the KST X20-1035 is appropriate for all fast large gliders, jets and helicopters on surfaces requiring very high speed response. This servo is also perfect for the tail rotor on 550 - 700 class helicopters.

    In addition to the four heavy duty plasic output arms, which are similar to futaba 25T splines, the servo is supplied with two attractive red annodised aluminium arms with M2 threaded holes.

    The extreme reliability and performance of these servos also makes them very suitable for use in film and motion picture industry special effect departments. They are also used in robotic, drone, UAV, UAS, academic research, military, and other highly demanding applications.

    Specification:

    • Body dimensions: 40.5 x 20.2 x 36.3 mm
    • Stall torque (6V): 8.5 kg.cm     118 oz.in
    • Stall torque (7.4V): 10.3 kg.cm     143 oz.in
    • Stall torque (8.4V): 12 kg.cm     167 oz.in
    • Weight:    70 g     2.47 oz
    • Lead length: 31 cm     12.3 in
    • Operating speed (6V):    0.040 sec/60°
    • Operating speed (7.4V):    0.035 sec/60°
    • Operating speed (8.4V):    0.030 sec/60°
    • Operating voltage: 6.0V to 8.4V
    • Bearings: 2 ball bearing
    • Gear material:    Metal
    • Case material:     Metal
    • Motor type: Brushless
    • Working frequency: 560 Hz
    • Pulse width:  900 - 2100 µs
    • Digital: Yes
    • Programmable: No

    Supplied accessories:

    • 2 x metal output arms
    • 4 x plastic output arms
    • 1 x arm retaining screws
    • 4 x mouning screws
    • 4 x rubber grommets
    • 4 x bushes

     

    SKU: KST-X20-1035
    €109.90
    inc. VAT

  • KST X20-2208MG HV Brushless Servo - 35Kg.cm 0.07s 69g 20mm

    KST X20-2208MG HV Brushless Servo - 35Kg.cm 0.07s 69g 20mm

    KST X20-2208MG HV Brushless Servo - 35Kg.cm 0.07s 69g 20mm

    The KST X20-2208MG HV Brushless servo is the brother of the X20-1035 but offers much greater torque. Being brushless it represents a new revolution in servo design. It offers significantly longer life operation, with a superior power to weight ratio, contributing to a reduced motor burn-out susceptibility. The servo features a nicely machined metal case and offerers high voltage capability, designed to be run directly from a 2S LiPo without needing a regulator.

    The servo is approx standard size and has an output spline the same as similar Futaba servos, so many compatible output arms are available. At 20mm thick and an impressive 35 kg.cm torque the KST X20-2208 is appropriate for all fast large gliders, jets and helicopters on surfaces requiring very high speed response. This servo is perfect for cyclic on 550 - 700 class helicopters.

    KST also advise unlike any other servo, the X20 generates no counter EMF in any working conditions. It has an all-new design of circuit board, so your heli flybarless system and receiver will not be interfered with and will not display any weird behavior as a result.

    In addition to the four heavy duty plasic output arms the servo is supplied with two attractive red annodised aluminium arms with M2 threaded holes.

    The extreme reliability and performance of these servos also makes them very suitable for use in film and motion picture industry special effect departments. They are also used in robotic, drone, UAV, UAS, academic research, military, and other highly demanding applications.

    .Specification:

    • Servo Type: Digital
    • Gear Type: Metal
    • Stall Torque: 18Kg.cm@6V, 22Kg.cm@7.4V, 25Kg.cm@8.4V
    • Speed: .o9sec/60°@6V, .08sec/60°@7.4V, .07sec/60°@8.4V
    • Voltage Rating: 6V to 8.4V
    • Dimensions: 40.5 mm wide x 20 mm thick x 38 mm high
    • Weight: 72g / 2.53oz
    SKU: KST-X20-2208
    €109.99
    inc. VAT

     LOW STOCK
  • MKS HBL6625 Servo - 10mm 29g 10.4Kg.cm

    MKS HBL6625 Servo - 10mm 29g 10.4Kg.cm

    The MKS HBL6625 Mini HV Brushless Servo is the new best mini wing servo currently available. Its unbelievably good geartrain, strong alloy case, brushless motor, efficient high voltage capability and excellent feedback system, all make this the wing servo of choice for many top level competion disciplines and all fast saiplanes.

    At only 10mm thick this superb wing-servo can easily fit in thin wings. With a good 6 kg.cm torque the HBL6625 Mini is appropriate for F3F, F3B, F3J, F5J and all fast gliders, racers, and jets.

    These are high voltage servos that can be safely operated from 4.8V to 8.4V, so can be powered by an unregulated 2S LiPo battery.

    The MKS hallmark CNC aluminium alloy case adds rigidity and crash resistance to the servo. The gears are pre-loaded to remove all slop or backlash from the geartrain, allowing a level of precision unequalled by other manufacturers.

     

    MKS HBL6625 Mini Specifications
    Body dimensions    30.0 mm wide x 10.0 mm thick x 30.5 mm high
    Stall torque (6V)    5.20 kg.cm    72 oz.in
    Stall torque (7.4V)    5.60 kg.cm    78 oz.in
    Stall torque (8.2V)    6.00 kg.cm    83 oz.in
    Weight    26.7 g    0.94 oz
    Lead length    22 cm    8.7 in
    Operating speed (6V)    0.14 sec/60°
    Operating speed (7.4V)    0.11 sec/60°
    Operating speed (8.2V)    0.10 sec/60°
    Operating voltage    3.5V to 8.4V
    Bearings    2 ball bearings
    Gear material    Chrome-titanium alloy
    Case material    CNC machined 6061 aluminium
    Motor type    10 mm brushless motor
    Working frequency    333 Hz
    Dead band    1 µs
    Driver type    FET
    Digital    Yes

     

    SKU: MKS-HBL6625
    €159.00
    inc. VAT

     72HR STOCK
  • MKS HBL950 High Voltage Brushless Cyclic Servo

    MKS HBL950 High Voltage Brushless Cyclic Servo

    This is the MKS HBL950 Brushless, Titanium Gear, High Torque, High Voltage Digital Servo for cyclic.

    HBL-950 Specifications:

    • Dead band: 0.0008ms (Default)   
    • Working frequency: 1520μs / 333hz   
    • (RX) Required Pulse: 3.5 ~ 7.2 Volt Peak to Peak Square Wave
    • Operating Voltage: 6.0 ~ 8.4 V DC Volts (2sLipo un-regulated)
    • Operating Temperature Range: -10 to + 60 Degree C
    • Operating Speed (6.0V): 0.12 sec/60° degrees at no load
    • Operating Speed (7.4V): 0.10 sec/60° degrees at no load
    • Stall Torque (6.0V): 174.7 oz/in (13.3 kg.cm)
    • Stall Torque (7.4V): 229.14 oz/in (16.5 kg.cm)
    • 360° Modifiable: NO   
    • Motor Type: Brushless Motor
    • Potentiometer Drive: Indirect Drive   
    • Bearing Type: Dual Ball Bearings
    • Gear Type: Chrome-Titanium alloy gear
    • Programmable: NO   
    • Connector Wire Length: 24.0cm (9.4")
    • Dimensions: 40x20x40mm (1.57x0.79x1.50")
    • Weight: 70.2g (2.48 oz)
    SKU: MKS-HBL950
    €136.99
    inc. VAT

     72HR STOCK
  • MKS HBL980 High Voltage Brushless Cyclic Servo

    MKS HBL980 High Voltage Brushless Cyclic Servo

    This is the MKS HBL980 Brushless, Titanium Gear, High Speed, High Voltage Digital Servo for tail / gyro / narrow band.

    HBL-980 Specifications:

    •   Dead band: 0.0008ms (Default)   
    •   Control System: +Pulse Width Control
    •   Working frequency: 760μs / 560hz   
    •   (RX) Required Pulse: 3.5 ~ 7.2 Volt Peak to Peak Square Wave
    •   Operating Voltage: 6.0 ~ 7.2 V DC
    •   Operating Temperature Range: -10 to + 60 Degree C
    •   Operating Speed (6.0V): 0.04 sec/60° degrees at no load
    •   Operating Speed (7.4V): 0.036 sec/60° degrees at no load
    •   Stall Torque (6.0V): 62.5 oz/in (4.5 kg.cm)
    •   Stall Torque (6.0V): 77.77 oz/in (5.6 kg.cm)
    •   360° Modifiable: NO   
    •   Motor Type: Brushless Motor
    •   Potentiometer Drive: Indirect Drive   
    •   Bearing Type: Dual Ball Bearings
    •   Gear Type: Titanium Gears
    •   Programmable: NO   
    •   Connector Wire Length: 24.0cm (9.4")
    •   Dimensions: 40x20x40mm (1.57x0.79x1.50")
    •   Weight: 70.2g (2.48 oz)
    SKU: MKS-HBL980
    €149.99
    inc. VAT

  • New Power XLC 56HMB HV Digital Servo (22.5 kg/0.10 sec)

    New Power XLC 56HMB HV Digital Servo (22.5 kg/0.10 sec)

    A high quality, high power, HV servo suitable for many different types of model. Equally at home as a car steering servo or in an aircraft/helicopter where torque, holding power and precision are the prime requirements.

    With anti-wear coated metal gears, twin ball races, a coreless motor, plus metal centre body for heat dissipation, the XLC-56HMB is a pure professional level servo for discering modellers. This servo has the advantage of being waterproof as well, not just water resistant.

    Specifications:

    • Weight: 56g
    • Electric Motor: Coreless
    • Dimensions: 40.2 x 20 x 37.6mm
    • Speed: 0.18secs @ 4.8v
    • Speed: 0.15secs @ 6v
    • Speed: 0.10secs @ 7.4v
    • Torque: 30 kg/cm @ 7.4v
    • Torque: 20 kg/cm @ 4.8v
    • Torque: 22.5 kg/cm @ 6v
    • Gear Type: Aluminium & Brass
    SKU: P-NEWXLC56HMB
    €61.99
    inc. VAT

     72HR STOCK
  • New Power XLD 02 Digital Servo (0.23 kg/0.09 sec)

    New Power XLD 02 Digital Servo (0.23 kg/0.09 sec)

    Those ultra small indoor models can now have the benefit of digital holding power as well as strong torque and good speed courtesy of the coreless motor. Even the leads have been optimised to reduce weight without increasing resistance.

    Specifications:

    • Weight: 2g
    • Electric Motor: Coreless
    • Dimensions: 16.3 x 8.3 x 18mm
    • Voltage: 3.7 - 4.8v
    • Gear Type: Plastic
    • Speed (4.8v): 0.09 secs 60Deg
    • Torque: 0.23Kg
    • Bearings: Plastic
    SKU: P-NEWXLD02
    €10.99
    inc. VAT

     72HR STOCK
  • New Power XLD 09HMB Digital Servo (3.5 kg/0.10 sec)

    New Power XLD 09HMB Digital Servo (3.5 kg/0.10 sec)

    Identical to the regular 09HMB version but with real, digital holding power.

    Specifications:

    • Weight: 11g
    • Bearings: Ballrace
    • Dimensions: 23.2 x 12 x 24.8mm
    • Gear Type: Metal
    • Speed (4.8v): 0.12 secs 60deg
    • Speed (6.0v): 0.10 secs 60deg
    • Torque (4.8v): 3kg
    • Torque (6.0v): 3.5kg
    • Voltage Range: 4.8v - 6.0v
    SKU: P-NEWXLD09HMB
    €12.50
    inc. VAT

     72HR STOCK
  • New Power XLD 100HMB Digital Servo (20 kg/0.16 sec)

    New Power XLD 100HMB Digital Servo (20 kg/0.16 sec)

    Specifications:

    • Weight: 120g
    • Bearings: Ballrace
    • Dimensions: 58.8 x 28.7 x 54.5mm
    • Gear Type: Metal
    • Speed (4.8v): 0.18secs 60Deg
    • Speed (6.0v): 0.16secs 60Deg
    • Torque (4.8v): 17Kg
    • Torque (6.0v): 20Kg
    • Voltage Range: 4.8 - 6.0v
    SKU: P-NEWXLD100HMB
    €34.99
    inc. VAT

     72HR STOCK
  • New Power XLD 17MB Digital Servo (2 kg/0.055 sec)

    New Power XLD 17MB Digital Servo (2 kg/0.055 sec)

    Similar to the standard 17HMB but with slightly reduced torque and much higher speed. Digital holding power and accuracy make this servo ideal for both cyclic and tail applications in helis as well as lightweight 3D models and gliders.

    Specifications:

    • Weight: 17.5g
    • Bearings: Ballrace
    • Dimensions: 29.5 x 11.6 x 30.2mm
    • Gear Type: Metal
    • Speed (4.8v): 0.07 secs 60deg
    • Speed (6.0v): 0.055 secs 60deg
    • Torque (4.8v): 1.8kg
    • Torque (6.0v): 2.0kg
    • Voltage Range: 4.8v - 6.0v
    SKU: P-NEWXLD17MB
    €17.99
    inc. VAT

     72HR STOCK
  • New Power XLD 25 HB Digital Servo (2.5 kg/0.045 sec)

    New Power XLD 25 HB Digital Servo (2.5 kg/0.045 sec)

    A Digital, mini size, super-fast servo that is great for helicopter tails or even cyclic. The digital holding power is particularly useful and precison comes courtesy of the twin ballraces plus speed from the coreless motor. Can be used in all types of model that require high speed operation from a compact size.

    Specifications:

    • Weight: 25g
    • Electric Motor: Coreless
    • Bearings: Twin Ballrace
    • Dimensions: 35.5 x 15 x 28.6mm
    • Gear Type: Plastic
    • Speed (4.8v): 0.065secs 60Deg
    • Speed (6.0v): 0.045secs 60Deg
    • Torque (4.8v): 2.2Kg
    • Torque (6.0v): 2.5Kg
    • Voltage Range: 4.8 - 6.0v
    SKU: P-NEWXLD25HB
    €27.99
    inc. VAT

     72HR STOCK
  • New Power XLD 25 HMB Digital Servo (3.8 kg/0.09 Sec)

    New Power XLD 25 HMB Digital Servo (3.8 kg/0.09 Sec)

    Digital, mini size servo that is suitable for aircraft (especially gliders), helicopters and small cars. The higher than average speed is particularly good for helicopters.

    Specifications:

    • Weight: 2g
    • Electric Motor: Coreless
    • Bearings: Twin Ballrace
    • Dimensions: 35.5 x 15 x 28.6mm
    • Gear Type: Metal
    • Speed (4.8v): 0.11secs 60Deg
    • Speed (6.0v): 0.09secs 60Deg
    • Torque (4.8v): 3.4Kg
    • Torque (6.0v): 3.8Kg
    • Voltage Range: 4.8 - 6.0v

     

    SKU: P-NEWXLD25HMB
    €31.50
    inc. VAT

     72HR STOCK
  • New Power XLD 37 HB Digital Servo (7 kg/0.14 sec)

    New Power XLD 37 HB Digital Servo (7 kg/0.14 sec)

    Digital, standard size, medium torque servo for use in sports and aerobatic aircraft and smaller speed boats

    Specifications:

    • Weight: 37g
    • Bearings: Ballrace
    • Dimensions: 39.9 x 19.8 x 37.6mm
    • Gear Type: Plastic
    • Speed (4.8v): 0.16secs 60Deg
    • Speed (6.0v): 0.14secs 60Deg
    • Torque (4.8v): 6.0Kg
    • Torque (6.0v): 7.0Kg
    • Voltage Range: 4.8 - 6.0v
    SKU: P-NEWXLD37HB
    €15.99
    inc. VAT

     72HR STOCK
  • New Power XLD 38 HMB Digital Servo (11 kg/0.14 sec)

    New Power XLD 38 HMB Digital Servo (11 kg/0.14 sec)

    Digital, standard size, high torque servo suitable for 1/10th off road cars, boats and larger aircraft.

    Specifications:

    • Weight: 42g
    • Bearings: Ballrace
    • Dimensions: 39.9 x 19.8 x 47mm
    • Gear Type: Metal
    • Speed (4.8v): 0.16secs 60Deg
    • Speed (6.0v): 0.14secs 60Deg
    • Torque (4.8v): 9.0Kg
    • Torque (6.0v): 11.0Kg
    • Voltage Range: 4.8 - 6.0v
    SKU: P-NEWXLD38HMB
    €19.50
    inc. VAT


Manufacturers

Back