Flybarless controllers

Flybarless controllers

Flybarless combos and controllers

Products


  • Mikado VBar NEO + Gyro 6.1 Express

    Mikado VBar NEO + Gyro 6.1 Express

    VBar NEO + Gyro Sensor, with 6.1 Express Software (available end of May)

    Our new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access, and the usage of Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models. Pro implicitely includes the VPlane license.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.1 control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

    Specifications:

    • Dimensions: 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight: 13,5 g / 0,47 oz
    • Supply Voltage: 3,5 - 8,4 V (2S Lipo)

    Content:

    • Mini USB cable
    • Boot Plug, Patch cable
    • Gyro pad 10 x 50 x 1,2 mm
    • Internal multi-axis sensor array plus external Premium 3-Axis Gyro with Silicon Sensing Ring Sensor Technology
    • Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • 6.1 Express Software with Electric Governor and Bank Switching


    Hardware Requirements:

    • Radio with min. 5 channels, digital single line receiver (e.g. SBus, MLink, HoTT SUMD, JR XBus mode B) or Spektrum satellites
    SKU: MIK-4946
    €299.00
    inc. VAT

     72HR STOCK
  • Mikado VBar NEO 6.1 Express

    Mikado VBar NEO 6.1 Express

    VBar NEO with built-in VLink receiver, with 6.1 Express Software

    The new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains the latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access, and the usage of Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models. Pro implicitely includes the VPlane license.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.1 control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

    Specifications:

    • Dimensions: 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight: 13,5 g / 0,47 oz
    • Supply Voltage: 3,5 - 8,4 V (2S Lipo)

    Includes:

    • Mini USB cable
    • Boot Plug, Patch cable
    • Gyro pad 10 x 50 x 1,2 mm
    • Internal multi-axis sensor array, additional 3 axis sensor can be connected (not included)
    • Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • 6.1 Express Software with Electric Governor and Bank Switching

    Hardware Requirements:

    • Radio with min. 5 channels, digital single line receiver (e.g. SBus, MLink, HoTT SUMD, JR XBus mode B) or Spektrum satellites
    • Availbale software upgrades     PRO Software, PRO Software with Rescue function (purchase via App Store on www.vstabi.info)
    SKU: MIK-4945
    €189.00
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO Aluminium Case - Blue

    Mikado VBar NEO Aluminium Case - Blue

    Mikado VBar NEO Aluminium Case - Blue

    For devices of the 2nd Generation (V2) only.

     

     

    SKU: MIK-5125
    €34.99
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO Aluminum case, grey

    Mikado VBar NEO Aluminum case, grey

    Mikado VBar NEO Aluminum case, grey

    For devices of the 2nd Generation (V2) only.

     

     

    SKU: MIK-05250
    €34.99
    inc. VAT

     72HR STOCK
  • Mikado VBar NEO VBasic Receiver

    Mikado VBar NEO VBasic Receiver

    Mikado VBar NEO VBasic Receiver

    VBar NEO VBasic (VBasic) is an innovative receiver for VBar Control, setting new standards with regard to range of features, and fit for the future with updates and function extensions.

    Features:

    • Easy setup via VBar Control Setup Wizard and clearly structured menus in VBar Control
    • Using Presets and the Setup Wizard you get ready for flight quickly—for almost any application, like R/C-cars, boats, planes, jets, as a receiver for a multi-rotor flightcontrol, as a receiver for other flybarless systems
    • Competition-ready since it does not use gyros
    • 5 analog control functions and programmable switching functions
    • 9 physical outputs (servo connectors)
    • 3 parameter banks (flight modes/-conditions)
    • 6 mixers with 5 inputs, differential mix, servo-throw adjustment, servo-travel limit
    • expo, trims and multi-rate per parameter bank and control input
    • throttle channel with idle trim (via rotary knob) and throttle idle for each parameter bank
    • innovative, self-learning trim concept without help of gyros (trim while you control the model), optional trim by means of rotary knobs, EDS dial on VBar Control
    • Buddy-boxing ready, also cross-over-buddy-boxing ready (VBar Control together with a radio of a different brand)
    • Model Sharing (bind and fly)
    • Ready for VBar Control telemetry sensors or ­Kontronik® TelMe
    • Event Log
    • Macrocells offer freely programmable mixers, 7-point curves, sequencers e.g. for retracts
    • Multiprotocol Single Line Receiver: connect to other systems via proprietary or open protocols like Futaba® S.Bus, Spektrum® satellite protocol simulation, Universal Digital Interface (UDI), analog PPM8 or PPM12 (8/12 channels), with variable update rate, both as input and output possible
    • Connect multiple VBasic and/or VBar NEO devices via Interbus to get a multi-redundant diversity receiver setup (up to 4 diversity receivers/8 antennae), with up to 23 physical outputs (servo connectors)
    • Ready for updates as they come available—with software updates you can enable VBasic for other purposes, for more complex airplanes (VPlane), for helicopters (VBar), for multi-rotors (VCopter), and VBar and VCopter of course with the tried and tested Rescue feature—all required sensors are already on board

    Specifications:

    • Dimensions     45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight     14 g
    • Supply Voltage     3,5 - 8,4 V (2S Lipo)
    • Content
    • USB cable     Mini USB Cable, Boot Plug
    • main unit     Multiprotocol Single Line Empfänger (Vlink,UDI, S-Bus, Spektrum, PPM)
    • Gyrosensor     Internal multi-axis sensor array (inactive in VBasic, enabled by software updates with cost)
    • Manual     Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • Software     VBasic Receiver Firmware, VExtender
    SKU: MIK-5054
    €119.00
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO VLink + Gyro 6.1 Express

    Mikado VBar NEO VLink + Gyro 6.1 Express

    VBar NEO with built-in VLink receiver + Gyro sensor, with 6.1 Express Software

    Our new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access, and the usage of Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models. Pro implicitely includes the VPlane license.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.1 control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

    Specifications:

    • Dimensions: 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight: 25,3g / 0,85oz
    • Supply Voltage: 3,5 - 8,4 V (2S Lipo)

    Includes:

    • Mini USB cable
    • Boot Plug and Patch cable
    • Gyro pad 10 x 50 x 1,2 mm
    • Gyrosensor    ( Internal multi-axis sensor array plus external Premium 3-Axis Gyro with Silicon Sensing Ring Sensor Technology)
    • Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • 6.1 Express Software with Electric Governor and Bank Switching

    Hardware Requirements:

    • VBar Control Radio
    SKU: MIK-4950
    €349.00
    inc. VAT

     72HR STOCK
  • Mikado VBar NEO VLink 6.1 Express

    Mikado VBar NEO VLink 6.1 Express

    VBar NEO with built-in VLink receiver, with 6.1 Express Software

    The new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains the latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access, and the usage of Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models. Pro implicitely includes the VPlane license.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.1 control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

    Specifications:

    • Dimensions: 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
    • Weight: 25,3g / 0,85oz
    • Supply Voltage: 3,5 - 8,4 V (2S Lipo)

    Includes:

    • Mini USB cable
    • Patch cable (Boot Plug, Patch cable)
    • Gyro pad 10 x 50 x 1,2 mm
    • Gyrosensor: Internal multi-axis sensor array, additional 3 axis sensor can be connected (not included)
    • Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
    • 6.1 Express Software with Electric Governor and Bank Switching

    Hardware Requirements:     

    • VBar Control Radio

     

    SKU: MIK-4949
    €248.00
    inc. VAT

     LOW STOCK
  • Mikado VBar NEO VLink 6.x Express RED

    Mikado VBar NEO VLink 6.x Express RED

    VBar NEO with built-in VLink receiver, with 6.x Express Software

    The new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access.
    With VBar Control, Pro also provides access to Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models.
    Pro implicitely includes the VPlane firmware license for fixed wing models, which can be used with VBar Control exclusively.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.x control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    SKU: MIK-05309
    €248.00
    inc. VAT

     72HR STOCK
  • Mikado VBar NEO VLink 6.x Express, Black

    Mikado VBar NEO VLink 6.x Express, Black

    VBar NEO with built-in VLink receiver, with 6.x Express Software

    The new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains latest sensor technology and top processing power.

    The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.

    The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.

    VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.

    Pro configuration contains extended parameter access.
    With VBar Control, Pro also provides access to Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models.
    Pro implicitely includes the VPlane firmware license for fixed wing models, which can be used with VBar Control exclusively.

    The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.

    To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.

    Even Express contains a updated 6.x control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!

    SKU: MIK-05308
    €248.00
    inc. VAT

     72HR STOCK
  • Mikado VBar Silverline 6.0 PRO with RX-Satellite

    Mikado VBar Silverline 6.0 PRO with RX-Satellite

    Mikado VBar Silverline 6.0 PRO with RX-Satellite

    SKU: MIK-4883
    €269.00
    inc. VAT

     72HR STOCK
  • NANOBEAST control unit for small RC model helicopters

    NANOBEAST control unit for small RC model helicopters

    NANOBEAST control unit for small RC model helicopters

    The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level.
    The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot. The steering feel can be adjusted from tame to extremely agile.
    Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional. Through a paid firmware upgrade, the system can be extended to "ProEdition".
    This offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsafe attitude, as well as a bank switching, which allows to switch between different parameter sets in flight.
    For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.
    This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.


    Supported receiver types / transmission protocols

    • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spektrum® SRXL
    • Futaba® SBUS
    • Single satellite (Spektrum® DSM2 / DSMX, JR® RJ-01 DMSS)
    • Jeti® EXBUS
    • ALIGN / FlySky iBus
    • PPM sum signal (SPPM)


    Technical specifications

    • Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM sum signal
    • Input voltage: 4.8V to 6.0V
    • Recommended helicopter size: 180 - 250 electric helmets
    • Dimensions: 32x20x10mm
    • Weight: 5.8g


    Delivery:

    • 1x NANOBEAST control unit
    • 1x patch cable for sum signal receiver
    • 2x adhesive pad
    • 1x manual
    • 1x decal sheet
    SKU: BXM76900
    €89.90
    inc. VAT

     IN STOCK
  • NANOBEAST control unit Servo Connection Kit

    NANOBEAST control unit Servo Connection Kit

    Adaptation kit to use servos equipped with conventional connectors (JR) with Flybarless BeastX Nanobeast.

    Specifications:
    Connectors: JST micro / JR
    Length: 50mm
    5 cables

    SKU: BXA76901
    €10.70
    inc. VAT

     LOW STOCK
  • NANOBEAST PRO-EDITION control unit for small RC model helicopters

    NANOBEAST PRO-EDITION control unit for small RC model helicopters

    NANOBEAST PRO-EDITION control unit for small RC model helicopters

    The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level.
    The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot.
    The steering feel can be adjusted from tame to extremely agile.
    Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional.
    This ProEdition offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsteady attitude, as well as a bank switching, which makes it possible to switch between different parameter sets in flight.

    For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.
    This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.


    Supported receiver types / transmission protocols

    • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spektrum® SRXL
    • Futaba® SBUS
    • Single satellite (Spektrum® DSM2 / DSMX, JR® RJ-01 DMSS)
    • Jeti® EXBUS
    • ALIGN / FlySky iBus
    • PPM sum signal (SPPM)


    Technical specifications

    • Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM sum signal
    • Input voltage: 4.8V to 6.0V
    • Recommended helicopter size: 180 - 250 electric helmets
    • Dimensions: 32x20x10mm
    • Weight: 5.8g


    Delivery:

    • 1x NANOBEAST control unit
    • 1x patch cable for sum signal receiver
    • 2x adhesive pad
    • 1x manual
    • 1x decal sheet
    SKU: BXM76900PE
    €169.90
    inc. VAT

     LOW STOCK
  • RDU Phase Tachometer

    RDU Phase Tachometer

    This one is a beauty! Just attach inline on one of the three brushless motor wires (solder up a male/female connector adapter for convenience) and log motor rpm extremely accurately throughout the motor run.

    You need to know how many magnets are in your motor to configure the RDU, but even if you don't know the Emeter can be connected and RDU rpm compared with the Emeter tach. Makes it a snap to set it up right, every time... And this unit is NOT plagued by the problems found in some other brands. It's rock solid!

    SKU: MIK-4442
    €10.00
    inc. VAT

     72HR STOCK
  • RJX Bluetooth Module for Mikado V-bar

    RJX Bluetooth Module for Mikado V-bar

    RJX Bluetooth Module for V-bar

    This Module makes your setup of the V-bar very easy and secure. No need of cables and having the Helicopter near to you. Just plug the Module into the V-bar and make your setup or any other operation. Support Voltage: 6 - 8.4V

    DO NOT FLY WITH THE MODULE PLUGGED IN
    SKU: BT1002B
    €29.00
    inc. VAT

     IN STOCK
  • Signal Cable Set

    Signal Cable Set

    Suitable for 3GX Flybarless systems.
    • Red/Orange/Yellow 120mm x 1
    • Green/blue/Purple 120mm x 1
    • Red/White/black 120mm x 1
    SKU: HEP3GX02
    €17.00
    inc. VAT

     72HR STOCK
  • SPARTAN Gyro Metal plate

    SPARTAN Gyro Metal plate

    SPARTAN Gyro Metal plate
    Gyros are sensitive to high frequency vibrations. The metal plate helps isolate these vibrations and not allow these vibrations to be transmitted to the Gyro. If your gyro was working fine and then suddenly started to drift try to find the source of this possible vibration.

    We recommend to use the metal plate between the gyro pads.

    1 metal plate in a set

    SKU: RCT00251
    €1.80
    inc. VAT

     IN STOCK
  • SPARTAN Vortex Nano VX1 Flybarless System & DataPod

    SPARTAN Vortex Nano VX1 Flybarless System & DataPod

    Spartan Vortex Nano VX1n Complete System & DataPod

    Designed for 3D Pro pilots and beginner alike the Vortex VX1 and VX1n will amaze you with their performance, features and intuitive installation.

    Tail - Based on Spartan's market leading gyro technology the Vortex is capable of delivering exceptional tail hold and consistent yaw rates even at eye-blurring speeds of over three full turns per second.

    Rotor - The cyclic and collective controls are smooth and precise with a very solid feel and impressive response time. Factory calibrated sensors and Spartan's proprietary piro compensation technology enable your helicopter to remain locked in through piro moves.

    Governor - The built in governor provides Nitro and Electric* modes and support for both magnetic and phase sensors. Cross mixing and look-ahead algorithms ensure that power is delivered in time and not as a result of RPM decay.

    Receiver - The Vortex supports SBUS & PPM single wire receiver connections, 1 or 2 Satellites and individual channel connections to traditional receivers. Additional channels provided by SBUS, PPM & Satellite receivers can be routed to the three AUX outputs.

    Setup - Using the Spartan DataPod field programmer your new Vortex can be installed and configured in minutes. Adjustments can also be done at the field without the need to carry a computer. The DataPod also doubles as USB interface enabling the Vortex to receive firmware updates.

    Power - The Vortex operates at both classic 5V and high voltage 8.4V (2S) power systems. The DataPod port of the Vortex also doubles as secondary power connection point when additional current is needed for high torque servos.

    The easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Backed up with Spartan's industry-leading warranty and including 3 years free repair service and 50% RRP discounted crash replacements the Vortex offers market leading performance, exceptional value and reassurance.

    Key features:

    • Designed for all helicopters; from the smallest electric to the largest nitro
    • Market leading tail hold and pirouetting consistency
    • Small and lightweight
    • Suitable for normal, DFC, rigid and multi-bladed rotor heads
    • Compatible with all digital tail servos (760us, 960us and 1520us)
    • Compatible with digital and analog swash servos
    • Compatible with standard pulse, PPM, SBUS and 1 or 2 satellite receivers
    • Built in governor with Nitro and Electric* modes
    • Superior balanced ring MEMS sensor technology
    • Easy configuration and field adjustments via the Spartan DataPod. You can deploy a new system in minutes
    • Firmware upgradable
    • Four configuration memories that can be selected in-flight for different flying styles. They can be mapped to Normal, Idle1, Idle2 & Hold or as the user requires
    Key features:

    • Dimensions control unit: 34 x 23.8 x 11mm (1.34 x 0.94 x 0.43 inch)
    • Dimensions sensor: 20.6 x 20.6 x 9.6mm (0.81 x 0.81 x 0.36 inch)
    • Weight: 14 grams (combined control unit & sensor)
    • Sensor lead: 16cm long (6.3 inch)
    • Sensor Type: Balanced ring MEMS with digital interface
    • Governor: Selectable Nitro or Electric*
    • Control system: Proprietary PID with adaptive tuning
    • Supported tail servos: Digital 760us, 960us and 1520us centre pulse
    • Supported swash servos: Digital or analog 1520us centre pulse
    • Supported receivers: Standard pulse, PPM, SBUS, 1/2 Satellites
    • Standard setup: DataPod
    • Computer connectivity: DataPod Bridge Mode
    • Operating voltage: 3.8V to 8.4V
    • Current draw: <100mA
    Box contents:

    Spartan VX1 control unit
    Spartan VX1 sensor
    VX1 welcome card
    Receiver cable set
    Adhesive foam pads


    SKU: SRC-VX1NDT
    €325.90
    inc. VAT

     LOW STOCK
  • SPARTAN Vortex Nano VX1n Complete System & DataPod

    SPARTAN Vortex Nano VX1n Complete System & DataPod

    SPARTAN Vortex Nano VX1n Complete System & DataPod

    Designed for 3D Pro pilots and beginner alike the Vortex VX1 and VX1n will amaze you with their performance, features and intuitive installation.

    Tail - Based on Spartan's market leading gyro technology the Vortex is capable of delivering exceptional tail hold and consistent yaw rates even at eye-blurring speeds of over three full turns per second.

    Rotor - The cyclic and collective controls are smooth and precise with a very solid feel and impressive response time. Factory calibrated sensors and Spartan's proprietary piro compensation technology enable your helicopter to remain locked in through piro moves.

    Governor - The built in governor provides Nitro and Electric* modes and support for both magnetic and phase sensors. Cross mixing and look-ahead algorithms ensure that power is delivered in time and not as a result of RPM decay.

    Receiver - The Vortex supports SBUS & PPM single wire receiver connections, 1 or 2 Satellites and individual channel connections to traditional receivers. Additional channels provided by SBUS, PPM & Satellite receivers can be routed to the three AUX outputs.

    Setup - Using the Spartan DataPod field programmer your new Vortex can be installed and configured in minutes. Adjustments can also be done at the field without the need to carry a computer. The DataPod also doubles as USB interface enabling the Vortex to receive firmware updates.

    Power - The Vortex operates at both classic 5V and high voltage 8.4V (2S) power systems. The DataPod port of the Vortex also doubles as secondary power connection point when additional current is needed for high torque servos.

    The easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Backed up with Spartan's industry-leading warranty and including 3 years free repair service and 50% RRP discounted crash replacements the Vortex offers market leading performance, exceptional value and reassurance.

    Key features:

    • Designed for all helicopters; from the smallest electric to the largest nitro
    • Market leading tail hold and pirouetting consistency
    • Small and lightweight
    • Suitable for normal, DFC, rigid and multi-bladed rotor heads
    • Compatible with all digital tail servos (760us, 960us and 1520us)
    • Compatible with digital and analog swash servos
    • Compatible with standard pulse, PPM, SBUS and 1 or 2 satellite receivers
    • Built in governor with Nitro and Electric* modes
    • Superior balanced ring MEMS sensor technology
    • Easy configuration and field adjustments via the Spartan DataPod. You can deploy a new system in minutes
    • Firmware upgradable
    • Four configuration memories that can be selected in-flight for different flying styles. They can be mapped to Normal, Idle1, Idle2 & Hold or as the user requires

    Specifications:

    • Dimensions: 36.6 x 23.8 x 14.4mm (1.4 x 0.9 x 0.6 inch)
    • Weight: 11 grams
    • Sensor Type: Balanced ring MEMS with digital interface
    • Governor: Selectable Nitro or Electric*
    • Control system: Proprietary PID with adaptive tuning
    • Supported tail servos: Digital 760us, 960us and 1520us centre pulse
    • Supported swash servos: Digital or analog 1520us centre pulse
    • Supported receivers: Standard pulse, PPM, SBUS, 1/2 Satellites
    • Standard setup: DataPod
    • Computer connectivity: DataPod Bridge Mode
    • Operating voltage: 3.8V to 8.4V
    • Current draw: <100mA

    Box contents:

    • Spartan VX1n flybarless
    • Welcome card
    • Receiver cable set
    • Adhesive foam pads

     

    SKU: SRC-VX1ND
    €271.00
    inc. VAT

     72HR STOCK
  • SPARTAN Vortex VX1 Wire Set

    SPARTAN Vortex VX1 Wire Set

    SPARTAN Vortex VX1 Wire Set

    This pack includes a complete set of wires for connecting the Vortex to a standard receiver.
    The heavy gauge male-male wire can also be used for PPM or SBUS connections.
    This is the same set of wires supplied with the Vortex VX1 flybarless system.
    Servo-Servo wire length 90mm.
    Servo-Sat wire length 100mm.

    Suitable for: Vortex VX1, Vortex VX1n

    SKU: SRC-VXW
    €14.90
    inc. VAT

     LOW STOCK
  • SPARTAN Vortex VX1n Wire Set

    SPARTAN Vortex VX1n Wire Set

    SPARTAN Vortex VX1n Wire Set

    This pack includes a complete set of wires for connecting the Vortex to a standard receiver.
    The heavy gauge male-male wire can also be used for PPM or SBUS connections.
    This is the same set of wires supplied with the Vortex VX1n flybarless system.
    Servo-Servo wire length 145mm.
    Servo-Sat wire length 210mm.

    Suitable for: Vortex VX1, Vortex VX1n

    SKU: SRC-VXWL
    €14.90
    inc. VAT

     LOW STOCK
  • USB-Interface for MICROBEAST USB2SYS

    USB-Interface for MICROBEAST USB2SYS

    USB-Interface for MICROBEAST, Plus, Plus HD

    Included:

    - USB2SYS interface
    - Patchcable 1,8m

    SKU: BXA76007
    €24.90
    inc. VAT

     LOW STOCK
  • V-Bar Bluetooth Adapter

    V-Bar Bluetooth Adapter

    V-Bar Bluetooth Adapter
    SKU: MIK-4056
    €59.00 €119.00
    inc. VAT

     72HR STOCK
  • V-bar Control Panel

    V-bar Control Panel

    The days of carrying an expensive laptop to the flying field are over, the new V-Bar Control Panel is the easiest and most practical way of programming the V-Bar. The V-Bar Control Panel is connected directly to the V-Bar via cable and allows you to program the V-Bar with necessary data such as initial set-up and parameter adjustment right at the flying field. The panel features an ergonomically correct turning knob and push button which have been integrated for easy operation, an SD card for loading model data or updating set-up software, and a high-contrast display which is readable even in bright sunlight. The SD card can also be used to transfer model data to another pilot’s helicopter.
     

    •   Easy-to-use set-up software
    •   High-contrast graphics display
    •   Easy handling via turning knob and push button Loading and saving via SD card
    •   Updates via SD card (Supplied)
    SKU: MIK-4152
    €79.00 €109.00
    inc. VAT

     LOW STOCK

Manufacturers

Back