MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.
Unit includes: support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s); supports 40A max charge/discharge rate; every port reverse polarity fuse protection of main battery wires; every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators; supports non-balanced charge of up to two 1s LiPos used with "indoor models"; supports 1 RX and 1 TX NiCd/NiMH battery pack. Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring. Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.
The parallel charge leads allow you to extend charge up to six battery packs simultaneously. Charging extension Cable for 5pcs walkera, Hubsan 1s Lipo
Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.
This unique design serves as both a charging and balancing cable for up to 5 of your 1S battery packs. Connect to your batteries with the connectors, as used in the walkera, Hubsan 1s lipos.. extension of 30cm, with Walkera Female 1s connector at the end.
The parallel charge leads allow you to charge up to six battery packs simultaneously.Charging Cable for 6pcs Walkera, Hubsan.. 1s Lipo Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.
This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the Walkera, Hubsan 1s lipos.. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2SJST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.
RCPROPLUS Pro-D5 Supra X Battery Connector Set. Featuring a unique patented banana plug lock design, these Pro-D5 connectors securely lock in place handling quick movements and vibrations, commonly found during extreme 3D flights, without coming apart. The stronger jacket and snaps extends the advantages of the previous generation of Supra X Connectors and makes them better.
These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free, while the sheath uses high temperature capable, impact-resistant plastic imported from Japan.
Features:
Patented lock design eliminates separation
Use with batteries, speed controllers and chargers
Recessed plug cavity and solder windows
Large, low resistance contact patch
Hassle free assembly
Specifications:
Peak Current: 140A
Continue Current: 100A
Applicable Wire: 10~12AWG
Finish Type: 24K Gold Plated
RCPROPLUS Pro-S6 Supra X Battery Connector (4 Sets) (8~10AWG)
This is a pack of six RCPROPLUS Pro-S6 Supra X Battery Connectors.
This set includes four male and four female black and red polarized connectors, as well as eight male and eight female bullet connectors and necessary hardware.
These connectors are a great solution for your high current and high voltage demands and are very similar to the PRO-X6 connectors, with the exception these lack the screw-on base and are square, not triangular.
The Pro-X6 connectors offer a large, low resistance surface patch for efficient power transfer, with a connector design that conceals all internals from outside exposure without the use of heat shrink.
Also, when the male and female ends are connected together, they ‘click’, letting you know they’re tightly joined and ready to perform.
In addition, the 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free.
This is a pack of four RCPROPLUS Pro-X6 Supra X Battery Connector. This set includes four male and four female black and red polarized connectors, as well as four male and four female bullet connectors.
Set including 3 sets, 6 Male+6 Female
These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The connectors also feature a base that screws onto the connector housing keeping all wires concealed, eliminating the need for heat shrink. Also, when the male and female ends are connected together, they ‘click’, letting you know they’re tightly joined and ready to perform.
In addition, the 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free.
Features:
Screw-on base eliminating any need for heat wrap
Use with batteries, speed controllers and chargers
These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together.These polarized connectors have many uses including batteries,power meters,charge leads and motors.
(Picture shows the male/female polarized connectors pushed together)
5 mm RCPROPLUS Supra X Gold Bullet Polarized Battery Connectors (20 pairs), 20M+20F
These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together.These polarized connectors have many uses including batteries,power meters,charge leads and motors.
(Picture shows the male/female polarized connectors pushed together)
6mm RCPROPLUS Supra X Gold Bullet Polarized Battery Connectors (20 pairs), 20M+20F
These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together.These polarized connectors have many uses including batteries,power meters,charge leads and motors.
(Picture shows the male/female polarized connectors pushed together)
This is a pack of 8 RCPROPLUS SUPRA-X REB6808 PRO D6 6mm Bullet Connector
Set including 8 PAIRS.
Featuring a unique patented banana plug lock design, these Pro-D6 connectors securely lock in place handling quick movements and vibrations, commonly found during extreme 3D flights, without coming apart. The stronger jacket and snaps extends the advantages of the previous generation of Supra X Connectors and makes them better.
These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free, while the sheath uses high temperature capable, impact-resistant plastic imported from Japan.
Cover material:IDEMITSU plastic
Banana connector diameter:6mm
Suggested Wires:8AWG-10AWG
Capacity (Continuous):200A
Capacity (Burst):240A
Banana connector material:Class A Cooper C54 Series
Plating:24K Gold / Flash
Features:
Connection between battery and ESC
Can be used for 4 batteries and 4 ESCs (or 4 charger cables)
Package Included:
4 x Set
8 x 6mm Female& Male Bullet Connector
Hook up your Charger to a lead-acid battery or a large power supply with these heavy duty alligator clips.
Two feet of 10 AWG wire give you plenty of flexibility to make your connection, and with clips rated for up to 60 amps, you can draw all the power you need for even the heaviest load. At the charger end of the cable, a female EC5 connector is ready to make an easy connection to your PL8 or PL6's input cable. can fit other chargers with a chance of the end connector
6mm RCPROPLUS Supra X Gold Bullet Connectors 10 pair,(10M,10F)
These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together. Excellent for motors, ESC's, batteries, power-meters and chargers.
MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.
Spcifications:
support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s);
supports 40A max charge/discharge rate;
every port reverse polarity fuse protection of main battery wires;
every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators;
supports non-balanced charge of up to two 1s LiPos used with "indoor models";
supports 1 RX and 1 TX NiCd/NiMH battery pack
Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring.
Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.
JST-SH Servo Plug Set for JR Servo side terminals .This a set of 10 Housings (plugs). Comes complete with 10 housings & 30 gold pins.
There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of female connectors provided which can be used to create/repair Female Servo leads which are usually found in extension leads
Great for servo replacements or for making your own servo extensions.
