Connectors & Cables

Connectors & Cables

We are the #1 provider of high performance connectors in the R/C market place.

Products


  • Heat Shrink Tube 2.4mm, 1meter long, Red or black

    Heat Shrink Tube 2.4mm, 1meter long, Red or black

    Heat Shrink 2.4mm, can shrink up to 50%( 2:1)  to use in servo wires,extensions , batteries, and any other application
    Pack of 1 meter
    Color black or Red

    SKU: MU61520/1
    €2.50
    inc. VAT

     IN STOCK
  • Heat Shrink Tube 3.2mm, 1meter long, Red or black

    Heat Shrink Tube 3.2mm, 1meter long, Red or black

    Heat Shrink 3.2mm, can shrink up to 50%( 2:1)  to use in servo wires,extensions , batteries, and any other application
    Pack of 1 meter
    Color black or Red

    SKU: MU61530
    €2.50
    inc. VAT

     IN STOCK
  • Heavy Duty HXT 6MM Bullet Connector Mega Pack

    Heavy Duty HXT 6MM Bullet Connector Mega Pack

    Rated up to 180 amps, 6mm gold connector, with Housing, to avoid reverse polarity by mistake and also accidental shortcuts.

    Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

    Rated to around 180A , Excellent for high current systems., and High voltage setups.
    Mega pack allows you over 20% saving over single pack price.

    10 x sets( each set includes 2 male, 2 female, 2 housings)

    SKU: HXT6MM-MEGA
    €39.00
    inc. VAT

     IN STOCK
  • Heavy Duty Servo Lead

    Heavy Duty Servo Lead

    Excellent quality made in Europe, those cable made from PVC 3x 0.35mm cable, length 20 cm
    Fits Futaba / Jr Provided Quality!
    This cable is produced and tested with most modern procedures.
    Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.
    Those cables provided with 3 years warranty

    SKU: SKU11221
    €4.00
    inc. VAT

     72HR STOCK
  • HITEC TX connector

    HITEC TX connector

    2P wire 0.30mm - Molex, fit Hitec Male White TX Pigtail

    SKU: KRL652
    €4.00
    inc. VAT

     IN STOCK
  • Hubsan- Losi -Walkera 2 pin Battery Male Connector (1pc)

    Hubsan- Losi -Walkera 2 pin Battery Male Connector (1pc)

    Hubsan/ Losi/ Walkera 2 pin Battery Male Connector with silicone wire 22AWG, 10CM long.
    Perfect to make your own battery pack.

    Set of 1 wire with connector.

    SKU: WKCONN
    €2.00
    inc. VAT

     IN STOCK
  • iCharger Junsi JST-XH Adapter Board CB1010-XH

    iCharger Junsi JST-XH Adapter Board CB1010-XH

    Charger JST-XH Adapter Board CB1010-XH

    Junsi iCharger adapter board suitable for 2S - 6S Lipos

    Suitable for use in combination with iCharger:

    • 4010 Duo
    • 406 Duo
    • 308 Duo
    • 3010B
    • 106B
    • 1010B+
    • 208B
    • 306B
    • 206B

    Please make sure that correct balance wires are used for your specific charger.

     

    SKU: CB1010-XH
    €9.99
    inc. VAT

  • Jeti AFC Anti-Spark Connectors 4,0mm

    Jeti AFC Anti-Spark Connectors 4,0mm

    The Jeti Model AFC 4.0mm connectors eliminate the flashes often witnessed when connecting controllers and battery packs.

    Size of 4.0mm the female plug sports a SMD resistor that does away with the usual flashed that occur during connection and that can harm the surface of both the male and female plug. The sets contain two male connectors, a usual female and an AFC female connector together with red and black shrink wrap.

    Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark

     

    SKU: JMS-ASC4
    €9.90
    inc. VAT

     72HR STOCK
  • Jeti AFC Anti-Spark Connectors 5.5mm (150A)

    Jeti AFC Anti-Spark Connectors 5.5mm (150A)

    The Jeti Model AFC 150 amps. connectors eliminate the flashes often witnessed when connecting controllers and battery packs. Size of 5.5mm the female plug sports a SMD resistor that does away with the usual flashed that occur during connection and that can harm the surface of both the male and female plug. The sets contain two male connectors, a usual female and an AFC female connector together with red and black shrink wrap.

    Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark

    Maximum current 150 amps.

    SKU: JMS-ASC5
    €12.90
    inc. VAT

  • JR screened jack

    JR screened jack

    JR screened jack plug in a metal barrel with coiled spring cable relief sleeve.

    Perfect for Simulator or make your own Trainer cable.

    SKU: SKU40932
    €6.00
    inc. VAT

     IN STOCK
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • JR-Spektrum trainer DIY

    JR-Spektrum trainer DIY

    DIY Trainer cord/buddy cable for JR and Spektrum radios

    Delivered : 2 connectors, Cable 2 meters,soldering lead, instructions

    Save $$$ by DIY, assembly time- 15 minutes

    SKU: JRTRKIT
    €9.00
    inc. VAT

     IN STOCK
  • JST Square connectors

    JST Square connectors

    JST connectors set Male+Female 170mm. Good for up to 10 amps.

    SKU: KRL0657
    €3.00
    inc. VAT

     IN STOCK
  • Kontronik Anti Spark Connector 5.5mm

    Kontronik Anti Spark Connector 5.5mm

    This new item is the Kontronik Anti Spark Connector 5.5mm which is supplied as two pairs of connectors to be used as a pair on a battery and a pair on your ESC.
    One of the female bullets includes 3 flat resistors which will reduce or even completely eliminate sparking while connecting the batteries to the ESC
    The complete package includes 2 male and 2 female connectors along with red and black heatshrink in various sizes.

    SKU: KO-9055
    €13.50
    inc. VAT

  • Large Heat Shrink( heatshrink) PVC, flat ,Made in germany

    Large Heat Shrink( heatshrink) PVC, flat ,Made in germany

    Thise Shrink is to use as a holding over a battery pack, or wrapping over larger items, like receiver pack and more.

    Sizes (flat) avaliable:

    33 mm fits diameters from 15 till 21 mm
    40 mm fits diameters from 17 till 25 mm
    69 mm fits diameters from 21 till 42 mm
    90mm fits diameters from 25 till 60 mm
    95 mm fits diameters from 32 till 69 mm
    115 mm fits diameters from 33 till 75 mm
    120 mm fits diameters from 37 till 78 mm
    165 mm fits diameters from 80 till 115mm

    included PVC of 1 meter

    SKU: HEATSHRINK1
    €3.00
    inc. VAT

     IN STOCK
  • Lipo Balance male-male EXTENSION Connector XH 6s

    Lipo Balance male-male EXTENSION Connector XH 6s

    Lipo Balance male-male EXTENSION Connector XH 6s, 30cm

    SKU: SKU14466
    €4.00
    inc. VAT

     IN STOCK
  • Male Deans-T to female XT60 adapter

    Male Deans-T to female XT60 adapter

     Deans-T type male to XT60 female adapter.

    This adapter is very helpful when you need to connect heterogeneous connectors

    SKU: XT60DEAN
    €2.00
    inc. VAT

     IN STOCK
  • Male-Male Patch cable adaptor

    Male-Male Patch cable adaptor

    Male to male Patch cable adaptor, fits All Flybarless systems, Data port , connecting a Futaba S.Bus receiver .Gold plated Futaba connectors

    Length+-15cm

    SKU: MU58138
    €4.00
    inc. VAT

     IN STOCK
  • Micro Parallel Board - mCPX & nCPX

    Micro Parallel Board - mCPX & nCPX

    Micro Parallel Charging Board - Unlimited Flight at Your Fingertips. Safe Parallel Charge Board for mCPX & Pico

    One of the best ways to extend your day of flying is multiple batteries, and with this Micro Parallel Charging Board, you can now charge up to (6) Ultra Micro Batteries, and (6) Nano CPX style batteries, allowing you to take flight times to new limits.

    Compatible with UMX style batteries found in aircraft like the Blade mSR, and NCPX batteries found in aircraft like the Blade nCPX, this parallel board can charge up to (12) batteries at once, allowing you to spend more time flying, and far less time waiting for your batteries to charge. Further, this micro parallel board is protected by self resettable fuses to prevent shorts when charging batteries in parallel.

    Specifications

    • Input Charge Connector: Male 4mm Banana Plug
    • Output Connector: 6x 1S Female JST-PH; 6x Female Pico
    • Wire Type: 18 AWG Silicone Charge Lead
    • Max Charge Rating: 1.5A per battery
    • Fuse Rating: 1.5A
    • Wire Length: 8"


    When charging in parallel, it is best to be sure that the batteries being charged are close in overall voltage. Charging multiple batteries that are far out of balance with each other can limit the batteries potential and shorten battery life.

    SKU: PH2-UMXNCP
    €7.00
    inc. VAT

     IN STOCK
  • mini JST - Female

    mini JST - Female

    2P Female connector Thin - mini JST, 23cm long
    SKU: KRL641
    €1.50
    inc. VAT

     IN STOCK
  • mini JST CONNECTOR

    mini JST CONNECTOR

    2P male connector Thin . 23 cm long

    SKU: KRL621
    €1.50
    inc. VAT

  • MT60 3.5mm 3 pole Soldering protected Motor connector set

    MT60 3.5mm 3 pole Soldering protected Motor connector set

    MT60 3.5mm 3-pin Motor connector set.

    Made from high-temp Nylon and 3.5mm gold plated spring connectors.

    Includes:

    • 1x male connector
    • 1x female connector
    • 2 x wire guiding sleeves

    SKU: MT60CONN
    €2.50
    inc. VAT

     IN STOCK
  • Multi harness cable 15cm for receiver and flybarless system or multicopters FC

    Multi harness cable 15cm for receiver and flybarless system or multicopters FC

    Multi harness cable 15cm for receiver and flybarless system or multicopters Flight controllers


    Package includes:

    • 1 multi harness cable lead 15cm.
    SKU: MU58139
    €4.90
    inc. VAT

     IN STOCK
  • Multi-Port Safe Parallel Adapter for EC5 XH/EH/HR

    Multi-Port Safe Parallel Adapter for EC5 XH/EH/HR

    Working with big 6S packs? Cut the clutter and get the one board that's designed specifically for your application.

    Designed from the ground-up with one purpose, this board is as straightforward as we could make it, with EC5 and 6S JST-XH connectors for up to four packs in parallel. With fuse protection on both the main and balance connections, you can rest easy knowing that all your gear is protected from any short circuits. 40A blade fuses on the main circuits are easily replaceable if needed, while the balance circuits have self-resetting poly-fuses built into the board.

    With both main and balance cables included to connect to whatever charger you're using, this is a true plug-and-play solution.

    SKU: MPL-EC5
    €55.00
    inc. VAT

     IN STOCK

Manufacturers

Back