Connectors & Cables

Set of Male+Female with 15cm wire attached.

• Locking device, patented.
• Use is where you want to be safe your battery doesnt disconnect in flight.

JST-XH 3s Lipo Balance Extension Lead (JST-XH) 30cm This extension made from 24awg cable. produced in Germany

JST-XH 5s Lipo Balance Extension Lead (JST-XH) 30cm
This extension made from 24awg cable. produced in Germany

 6mm RCPROPLUS Supra X Gold Bullet Connectors 10 pair,(10M,10F)

These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together. Excellent for motors, ESC's, batteries, power-meters and chargers.

Features:

• High voltage
• High current
• Large surface contact
• Recessed wire cavity
• Solder window
• Positive "Click" when pushed together

Specs:

• Peak current: 240A
• Continuous current: 200A
• Suits wire: 8 ~ 10AWG
• Finish: 24K Gold Plated 3 microns
• Quantity: 3 male / 3 female connectors

3.5mm gold Connectors for connecting to your battery, speed control, charger, power meter or similar applications!!

These have low resistance, and gives the best electric flow.

• Diameter: 3.5mm
• Current: 80Amp Max
  
• Weight: 2.19gr/set

Included:

•  2 x Red Casing
  
•  2 x Male 3.5mm Gold Bullet
•  2 x Female 3.5mm Gold Bullet

This connector features an insulated tip to stop big sparks from higher voltage applications.

This coupled with the plastic self insulating shroud offers a safe and affective connector package with no shrink tube needed.

Note:

•   When powering on, please connect the plug without yellow collar first, and then connect the plug wth yellow collar.
•   There is a Aniti Spark Protector in plug with yellow collar. (Please refer to the picture below.)

Features:

• Patented anti-spark design
• Open side for easy soldering
• Low resistance cladding
• Reusable threaded end design, easy to insert / take off from protect case
• Tightening ring on Female side to prevent losses after long time use

Specification:
 

•   Ø7mm (Male Pin) continuance current: 150A
•   Peak current: 200A

This jack easily mounts and contains a solder point for connection. 4mm opening to accept banana plugs.
Set of 2 (Black and Red)

Excellent quality connectors, made in Germany

The cable made from Silicone 2 x0.50mm .Fits Futaba or Jr ( per choice) .

This cable is produced and tested with most modern procedures. Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.
Those cables provided with 3 years Guarantee.

Set of long receiver wiring leads for the MICROBEAST flybarless system.

Length of 15cm and intended to be used to connect the MICROBEAST to your receiver.

Package includes:

• 3 multi conductor receiver leads, each 15cm in length.

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

This unique design serves as both a charging and balancing cable for your 2S battery pack. Connect to your battery with the JST-XH connector, as used in the T-Rex 150. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. Top-quality silicone wire gives you the flexibility you need to easily get everything connected.

Specifications

•   Input Charge Connector: Male 4mm Banana Plug
•   Input Balance Connector: Male 2S JST-XH
•   Output Connector: Female 2S JST-XH
•   Wire Type: 22 AWG Silicone
•   Length: 20CM

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

Directly connect to your charger with Banana 4mm bullet connectors, and bare wires to connect any of your desired connectors.
50cm of heavy-duty 12 AWG silicone wire gives you the flexibility to work in any charging setup.

Specifications

•   Input Connector: Male 4mm Banana Plug
•   Output Connector: Bare wires
•   Wire Type: 12 AWG Silicone
•   Length: 50cm