Compass

Compass

Products


  • Compass Model Tail Boom

    Compass Model Tail Boom

    Compass Model Tail Boom

    This is a replacement Compass Model Tail Boom, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:

    • Compass 7HV

     

    SKU: CPS09-7072
    €11.50
    inc. VAT

  • Compass Model Tail Fin

    Compass Model Tail Fin

    Compass Model Tail Fin

    This is a replacement Compass Model Tail Fin, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:
    Compass 7HV

    SKU: CPS09-7007
    €16.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Gear Box

    Compass Model Tail Gear Box

    This is a replacement Compass Model Tail Gear Box, and is intended for use with the Compass Model Atom 7HV.

    Part Compatibility:
    Compass 7HV

    SKU: CPS09-7051
    €61.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Guide Wheel Set

    Compass Model Tail Guide Wheel Set

    This is a replacement Compass Model Tail Guide Wheel Set, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:
    Compass 7HV

    SKU: CPS09-7066S
    €10.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Link Rod

    Compass Model Tail Link Rod

    Compass Model Tail Link Rod

    This is a replacement Compass Model Tail Link Rod, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:

    • Compass 7HV
    SKU: CS09-7012S
    €9.90
    inc. VAT

     LOW STOCK
  • Compass Model Tail Pitch Arm

    Compass Model Tail Pitch Arm

    This is a replacement Compass Model Tail Pitch Arm, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-7048
    €12.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Pitch Lever Set

    Compass Model Tail Pitch Lever Set

    This is a replacement Compass Model Tail Pitch Lever Set, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-8023
    €22.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Pitch Plate w/Ball Bearing

    Compass Model Tail Pitch Plate w/Ball Bearing

     Compass Model Tail Pitch Plate w/Ball Bearing

    Part Compatibility:

    • Compass Odin 90
    • Compass 3D Plus
    • Compass Sport X
    • Compass 6HV
    • Compass 7HV

    SKU: CPS02-1211
    €18.50
    inc. VAT

     72HR STOCK
  • Compass Model Tail Pitch Slider

    Compass Model Tail Pitch Slider

    This is a replacement Compass Model Tail Pitch Slider, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-7023
    €7.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Pitch Slider w/Ball Bearing

    Compass Model Tail Pitch Slider w/Ball Bearing

     Compass Model Tail Pitch Slider w/Ball Bearing

    Part Compatibility:

    • Compass Odin 90
    • Compass 3D Plus
    • Compass 6HV
    • Compass 7HV


    SKU: CPS05-0229S
    €11.90
    inc. VAT

     72HR STOCK
  • Compass Model Tail Pulley

    Compass Model Tail Pulley

    Compass Model Tail Pulley

    This is a replacement Compass Model Tail Pulley, and is intended for use with the Compass Model 7HV helicopter.

    Part Compatibility:
    • Compass 7HV


    SKU: CPS09-7075
    €8.95
    inc. VAT

     72HR STOCK
  • Compass Model Tail Rotor Hub Assembly

    Compass Model Tail Rotor Hub Assembly

    Compass Model Tail Rotor Hub Assembly

    Part Compatibility:

    • Compass Odin 90
    • Compass 3D Plus
    • Compass Sport X
    • Compass 6HV
    • Compass 7HV
    SKU: CPS02-0209
    €15.95
    inc. VAT

     72HR STOCK
  • Compass Model Upgrade Tail Assembly

    Compass Model Upgrade Tail Assembly

     Compass Model Upgrade Tail Assembly

    This is an optional Compass Model Upgrade Tail Assembly, and is intended for use with the Compass Model 7HV helicopter kit. To better provide their customers with the highest quality product possible, Compass Model has developed this upgraded tail assembly for the 7HV. With increased durability and performance at super high RPM's, this beefier tail assembly is superior in the sense that the stronger parts negate any tail blade balance, flex issues or broken parts.

    Includes:

    •   Tail Assembly -upgrade tail hub with one piece tail grips
    •   Metal Tail Arm Set
    •   6mm Tail Pulley
    •   Metal Tail Hinge
    •   6mm Tail Pitch Control Unit
    •   6mm tail shaft
    •   6mm Flanged Bearings (6x13x5)




    Part Compatibility:

    • Compass 7HV


    SKU: CPS09-8000
    €120.90
    inc. VAT

  • Compass Model Upper Servo Mount

    Compass Model Upper Servo Mount

    This is a replacement Compass Model Upper Servo Mount, and is intended for use with the Compass Atom 7HV helicopter.

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-7041
    €49.90
    inc. VAT

     72HR STOCK
  • Compass Model V2 Metal Tail Arm Set

    Compass Model V2 Metal Tail Arm Set

    This is a replacement Compass Model V2 Metal Tail Arm Set, and is intended for use with the Compass Model 7HV helicopter. Additionally, these parts are required to upgrade the V1 7HV with the V2 tail assembly (CPS09-5204).

    To upgrade your 7HV V1 with the V2 assembly, you will need to add the following parts:

    •   CPS09-5204
    •   CPS09-7075N
    •   CPS09-7079N
    •   CPS09-8205
    •   CPS61-6135

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-7048S
    €24.90
    inc. VAT

     72HR STOCK
  • Compass Model V2 Metal Tail Hinge

    Compass Model V2 Metal Tail Hinge

    This is a replacement Compass Model V2 Metal Tail Hinge, and is intended for use with the Compass Model 7HV helicopter. Additionally, these parts are required to upgrade the V1 7HV with the V2 tail assembly (CPS09-5204).

    To upgrade your 7HV V1 with the V2 assembly, you will need to add the following parts:

    •   CPS09-5204
    •   CPS09-7048S
    •   CPS09-7075N
    •   CPS09-8205
    •   CPS61-6135

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-7079N
    €14.90
    inc. VAT

     72HR STOCK
  • Compass Model V2 Tail Assembly

    Compass Model V2 Tail Assembly

    This is a replacement Compass Model V2 Tail Assembly, and is intended for use with the Compass Model 7HV V2 helicopter.

    To upgrade your 7HV V1 with the V2 assembly, you will need to add the following parts:

    •   CPS09-7048S
    •   CPS09-7075N
    •   CPS09-7079N
    •   CPS09-8205
    •   CPS61-6135

    Part Compatibility:

    • Compass 7HV
    SKU: CPS09-5204
    €55.90
    inc. VAT

  • Compass SZ 4926 Brushless Motor (510kV)

    Compass SZ 4926 Brushless Motor (510kV)

     Compass Model SZ 4926 Brushless Motor (510kV)

    This is the Compass Model SZ 4926 510kV Brushless Motor, and is intended for use with the Compass Model Atom 7HV helicopter.

    Specifications:
    Stator Diameter: 49mm (1.93in)
    Stator Thickness: 26mm (1.02in)
    Stator Sheet Thickness: 0.2mm (0.00787in)
    Outside Diameter: 59mm (2.32in)
    Body Length: 61mm (2.4in)
    Motor kV: 505-515kV RPM/Volt
    Weight: 480g (16.93oz)
    Shaft: 7.98mm (0.314in) to 5.89mm (0.24in)
    Overall Shaft Length: 98mm (3.86in)
    Free Shaft Length: 34mm (1.34in)
    Maximum Li-Po Cell: 14S
    Maximum Peak Current: 200A (3 seconds)
    Maximum Continues Current: 140A
    Number of Stator Slots: 12
    Number of Poles: 10
    Motor Wind: 14 turn YY
    Motor Wire: 1.4mm Single-strand
    Drive Frequency: 8kHZ


    Part Compatibility:

    • Compass 7HV

    SKU: CPSC-4926-510
    €305.90
    inc. VAT

  • Compass Tail Boom Brace Connectors

    Compass Tail Boom Brace Connectors

     Compass Model Tail Boom Brace Connectors w/Bolts (4pcs)

    Part Compatibility:

    • Compass 3D Plus
    • Compass Sport X
    • Compass 6HV
    • Compass 7HV
    SKU: CPS02-0813S
    €6.50
    inc. VAT

     72HR STOCK
  • Compass Warp 360 inc Motor & Blades

    Compass Warp 360 inc Motor & Blades

    Compass Warp 360 Kit inc Motor & Blades Red/White Canopy WARP360WR

    The Compass Warp 360 is the newest helicopter to the Compass Model product line.  The Warp 360 is a low-maintenance, aggressive, powerful and quiet 450 size electric helicopter!

    The Compass Warp 360 utilizes a single-stage direct belt drive which allows for an extremely quiet and efficient drive-train. The rotor head is comprised of a nearly rigid design by Compass Model. This head design provides a level of precision and aggressive response more commonly associated with the larger 90 size electrics, to the 450 size market.

    The Warp 360 will fly on batteries ranging from 3s to 6s LiPo.  The recommended power setup is a 6s LiPo in the 1000-1300MAh range.  The kit with a motor and blades will come with a 6s motor from Compass Model along with 350mm carbon fiber rotor blades.  The belt has been designed for a maintenance free and extremely efficient setup.  Belt hop or skipping has been eliminated with the large guide pulleys and reenforced belt design.

    Compass Model did not stop in its pursuit of developing world class r/c model helicopters on its newest model.  Compass knew it had to provide its customers the most powerful and precise 450 size helicopter ever developed.  To aid in this challenge they turned to a high voltage power plant.  The 6s high-voltage LiPo reduces the current load on the electronics. As the voltage is doubled to a 6s LiPo, the current drops as well as wasted energy, in the form of heat. The energy saved due to the lower heat output allows for the longer flight times compared to a 450s standard 3-cell LiPo system. The Warp 360 is proving to be the best 450 size electric helicopter ever developed.

    Features:

    •   Lightweight design for extreme 3D flights
    •   Fully Rigid rotor head without feathering shaft and dampeners
    •   Special ECPPM 120 degrees swashplate
    •   Aluminum / Carbon Fiber tail rotor
    •   Extremely strong Carbon frame
    •   7mm wide motor belt system
    •   4mm S2M belt system
    •   17mm tail boom
    •   6mm main shaft
    •   4mm tail shaft

    Technical Specs:

    •   Length - 689mm
    •   Height - 220mm
    •   Rotor diameter - 800mm
    •   Pinion size - 18T
    •   Main Gear - 150T
    •   Gear Ratio - 8.33:1:4.8
    •   All up weight - app. 850/950g with battery
    •   Lipo size - 3S (1800-2500MAh) -6S (1000-1300MAh)
    •   Main blades - 325-360mm
    SKU: WARP360WR
    €399.00
    inc. VAT

  • Guide Pin Bolt

    Guide Pin Bolt

    Product Name:  

    •  Guide Pin Bolts

    Model Number:  

    •  06-0222

    Product Specification:

    • 2 pcs/bag

    Suitable to Use on:  

    • Atom 500E, Atom 500E-r, 3DPlus
    SKU: 06-0222
    €5.00
    inc. VAT

     IN STOCK
  • One Block Tail Blade Holder Compass

    One Block Tail Blade Holder Compass

    One Block Tail Blade Holder Compass


    Item Description
    CS09-7208

    For the Compas 7HV

    SKU: CS09-7208
    €15.90
    inc. VAT

     72HR STOCK
  • Quick releaser Button

    Quick releaser Button

     Quick releaser Button 2 pcs

    SKU: CS04-8703
    €8.90
    inc. VAT

     72HR STOCK
  • Rotor Hub

    Rotor Hub

    Rotor Hub, 1 set/bag

    SKU: CS10-0005
    €12.90
    inc. VAT

     LOW STOCK

Manufacturers