Chargers

Chargers From gel cell and NiMH, to lipo battery charger, find the RC battery chargers you've been looking for, we have them all

Products


  • Spindle with O-rings and Hardware nCP X/CP S

    Spindle with O-rings and Hardware nCP X/CP S

    BLH3313 Feathering Spindle with O-rings and Hardware


    Blade Nano nCP X/CP S Parts

    SKU: BLH3313
    €6.00
    inc. VAT

  • Tail Rotor MCPX2/Nano nCP X/CP S

    Tail Rotor MCPX2/Nano nCP X/CP S

    Tail Rotor for Blade MCPX2/Nano nCP X/CP S

    SKU: BLH3603
    €3.90
    inc. VAT

     72HR STOCK
  • Top Equalizer 6 Cells 300

    Top Equalizer 6 Cells 300

    The Top-Equalizer 6S 300 mA is designed for equalizing (balancing) series-wired LiIo / LiPo / LiFe cells.
    The LiPo TOP Equalizer is connected between the LiPo charger and the LiPo battery.

    During the charge process the unit automatically brings the voltage of individual series-wired LiPo cells within a battery pack up to the same level. This is necessary, since the individual cells tend to be discharged to different voltages (states of charge) when in use. The Equalizer prevents overcharging or deep-discharging, which can result in permanent cell damage.

    The final charge voltage and charge current parameters are set on the battery charger. In contrast to earlier voltage controller devices, the Equalizer starts correcting the cell voltages immediately, when the charge process is initiated.

    TOP function -> permits the display of individual cell voltages on the integral screen of suitable battery chargers (e.g. Power Peak Compact and Infinity 3), or on a PC.

    Over-voltage cut-off: the device features a safety function in the form of over-voltage termination, which is triggered if the voltage of any one cell in the pack rises to 4.3 Volts (LiPo), 4.2 Volts (LiIo) or 3.9 Volts (LiFe). If used in conjunction with suitable battery chargers, the Equalizer automatically reduces the charge current when the cells reach a voltage of 4.25 V (4.15 V / 3.85 V). The battery must be connected to the TOP Equalizer using a sensor lead. robbe LiPo batteries are already fitted with the appropriate connector (JST-EHR).

    Features:

    2 ... 6 LiIo cells (3.6 V / cell), LiPo cells (3.7 V / cell) or LiFe batteries (3.3 V / cell) with a suitable LiPo charger, e.g. Power Peak Compact, Infinity 3.
    The Equalizer function can also be used separately, i.e. without a battery charger.

    Load current: 10.00 A
    Weight: 95 g

    SKU: Robbe8492
    €39.00
    inc. VAT

     LOW STOCK
  • Transmitter Outlet Charger 150

    Transmitter Outlet Charger 150

    Wall Outlet Charger TX-Rx 150/150 for Futaba radios

    Charging current : 150ma TX, and 150ma RX

    SKU: Robbe8282
    €12.00
    inc. VAT

     LOW STOCK
  • Tx LiPo charger 8.4 V / 500 mA T8/12FG

    Tx LiPo charger 8.4 V / 500 mA T8/12FG

    Tx LiPo charger 8.4 V / 500 mA T8/12FG

    Mains charger with 8,4V output and charge current of 500 mA.
    Connector plug 1,7 mm inside diameter and cable length of 1 m.

    SKU: RB8298
    €14.00
    inc. VAT

     LOW STOCK
  • Ultra Power Charger & power supply UP500AC Touch 2x500W 12V/220V

    Ultra Power Charger & power supply UP500AC Touch 2x500W 12V/220V

    Ultra Power Charger & power supply UP500AC Touch 2x500W 12V/220V

    Specification:

    • Input voltage: AC 110V or 220V / DC 15.0-24.0V
    • Charge power:2X500W (1000W)
    • Discharge power: 2X25W (50W)
    • Charge current range: 0.1-25.0A
    • Discharge current range:0.1-8.0A
    • LiIo/LiPo/LiFe/LiHv cell count:1~6 series
    • NiCd/NiMH battery cell count: 1 - 15cells
    • Pb battery voltage: 2V~20V (1-10cells)
    • Weight:3.3KG
    • Dimension: 255X139X123mm

    Package included:

    • 1 x UP500AC Touch Charger
    • 1 x Charging Cable Kit
    SKU: UP500AC-TOUCH
    €379.90
    inc. VAT

     LOW STOCK
  • UltraPower UP300AC Touch Multi Charger Built-in Power Supply

    UltraPower UP300AC Touch Multi Charger Built-in Power Supply

    UltraPower UP300AC Touch Multi Charger Built-in Power Supply

    • Terminal voltage control in 4.18V to 4.30V
    • Delta-peak sensitivity (NiMH/NiCd)
    • Individual cell balancing charge & discharge
    • Battery meter function
    • Touch one button to reserve factorysetting
    • Data storage (6 profiles in memory)
    • USB Ports for PC Control & FirmwareUpgrade

    Specifications:

    • Input voltage: AC 100-240V  /  DC 11.0-18.0V
    • Charge power: Max. 300W
    • Discharge power: Max. 25W     
    • Charge current range: 0.1~20.0A
    • Discharge current range: 0.1~5.0A     
    • LiIo/LiPo/LiFe cell count: 1~6 series
    • NiCd/NiMH battery cell count:     1 - 15cells     
    • Pb battery voltage: 2V~20V (1-10cells)
    • Current drain for balancing LiPo: 500mA/cell     
    • Weight: 1.2KG
    • Dimension: 180*139*60mm           

    Content:

    • 1 Ultra Power UP300AC Touch Charger
    • 1 Power Cable
    • 1 Connecting Line
    SKU: UP300AC
    €170.99
    inc. VAT

     72HR STOCK
  • Yellow RC EASY CHARGE+

    Yellow RC EASY CHARGE+

    Yellow RC EASY CHARGE+   

    This professional digital charger is the perfect charger for all battery types available.
    The display gives you all the required data from your packs and is easy to use.  

    Specification:

    • AC/DC Fast charger
    • Charge current 0.1-5.0A
    • NIMH/NICAD 1-15 Cells
    • LiPo  (1-6 Cells)
    • Integrated Balancer
    • Multiple connectors included
    • Easy to use interface
    • Input voltage AC: 100-240V
    • input voltage DC: 11.0-18.0V
    SKU: YEL4005
    €64.95
    inc. VAT

     72HR STOCK
  • Yuneec 12V DC Automobile Accessory Socket / Cigarette Lighter Receptacle Adapter

    Yuneec 12V DC Automobile Accessory Socket / Cigarette Lighter Receptacle Adapter

    Yuneec 12V DC Automobile Accessory Socket / Cigarette Lighter Receptacle Adapter

    SKU: YUNSC100
    €4.90
    inc. VAT

     LOW STOCK
  • Yuneec A10 Lipo Charger for Tornado H920

    Yuneec A10 Lipo Charger for Tornado H920

    Yuneec A10 Lipo Charger for Tornado H920

    SKU: YUNA10EU
    €149.00
    inc. VAT

     72HR STOCK
  • Yuneec PS1205 100-240V AC to 12V DC Adapter EU

    Yuneec PS1205 100-240V AC to 12V DC Adapter EU

    Yuneec PS1205 100-240V AC to 12V DC Adapter, 5.0-Amp Power Supply, EU Plug

    SKU: YUNPS1205EU
    €26.90
    inc. VAT

     LOW STOCK
  • Yuneec PS501 100-240V AC to 5V DC USB Adapter EU

    Yuneec PS501 100-240V AC to 5V DC USB Adapter EU

    Yuneec PS501 100-240V AC to 5V DC USB Adapter, 1.0-Amp Power Supply/Charger, EU Plug

    SKU: YUNPS501USBEU
    €9.90
    inc. VAT

     IN STOCK
  • Yuneec SC3500-3 3-Cell / 3S 11.1V LiPo, 3.5A DC Balancing Smart Charger

    Yuneec SC3500-3 3-Cell / 3S 11.1V LiPo, 3.5A DC Balancing Smart Charger

    Yuneec SC3500-3 3-Cell / 3S 11.1V LiPo, 3.5A DC Balancing Smart Charger

    SKU: YUNSC35003
    €31.90
    inc. VAT

     LOW STOCK

Manufacturers

Back