Chargers

Chargers From gel cell and NiMH, to lipo battery charger, find the RC battery chargers you've been looking for, we have them all

Products


  • Jeti Charger adapter DC-16 For Auto

    Jeti Charger adapter DC-16 For Auto

    Charger adapter DC-16 For Auto

    SKU: JMS-DC-CAR
    €12.90
    inc. VAT

     72HR STOCK
  • JUNSI ICHARGER 308 DUO 1300W/50A (800A/30A)

    JUNSI ICHARGER 308 DUO 1300W/50A (800A/30A)

    Need flexibility in your charging? Nothing beats the convenience of a dual-port charger. Two independent charging channels in one compact unit lets you simultaneously work with batteries of different cell count , charging at up to 30A simultaneously - or if you want to go all out, combine the two channels and charge at up to 50A!

    With two JST-XH balance boards included - one for each channel - you'll be ready to go right away.


     Specifications:

    • Maximum Charge Power: 1300W at >24V (800W max. per channel)
    • Charge Current Range: 5mA - 30A per channel (up to 50A in synchronous mode)
    • Discharge Current Range: 80W per channel (up to 120W in synchronous mode)
    • Input Voltage: 10 - 30V DC
    • Input Current: 60A (40A single channel maximum)
    • Maximum Discharge: 80W per channel (up to 140W in synchronous mode)
    • Maximum Regenerative Discharge: 800W per channel (up to 1300W in synchronous mode)
    • Maximum External Discharge: 050 W per channel (up to 2100W in synchronous mode)
    • Current Drain For Balancing: 1.2A per channel (up to 2.4A in synchronous mode)
    • Balance Accuracy: 10mV
    • LiPo/LiIo/LiFe: 1 - 8 series
    • NiCd/NiMh Cell Count: 1 - 25 series
    • Pb Battery Cell Count: 1 - 18 series
    • Battery Setup Memories: 64 user presets
    • Intelligent Temperature Control: Yes
    • USB Charging Port: 5V, 1A (1.2A current limiting protection)
    • PC Connectivity: Mini USB 2.0
    • Dimensions: 171x118x59mm
    • Weight: 910g
    • Warranty: 1 year

     

    SKU: JU-308DUO
    €319.00
    inc. VAT

     72HR STOCK
  • Junsi iCharger 4010 Duo Charger 2x1400W 10Sx2

    Junsi iCharger 4010 Duo Charger 2x1400W 10Sx2

    The 4010 DUO uses advanced high current and high-performance synchronous buck-boost DC/DC converter technology to deliver up to 2000W of charging power, with a maximum charge/discharge current of up to 40A per channel and two channels in Synchronous Mode up to 70A! Each channel supports 10S lithium batteries, while the impressive TFT LCD screen provides critical battery information including current, voltage, power, capacity, internal resistance, control status, time-consuming, temperature, and more. 64 parameters sets can be saved without repeat settings, simply import/export via an SD card. The 4010DUO applies a 1.2A balance current, and uses a unique "internal resistance correction" balance calculation, and the discharge features include discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. Plus, the 4010DUO can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of the individual cells within the battery.

    Internal temperature protection keeps the charger operating safely and efficiently. When the internal temperature exceeds the threshold, the output power is automatically reduced and the charger will shut down when the temperature exceeds the cut-temperature. The intelligent fan control senses the internal temperature and uses an internal temperature sensor to control the fan speed. The 4010DUO has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, time overrun, maximum power and more, while the multi-discharge features include discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. The hardware programming can be updated through the USB port. The 4010DUO also supports “Logview” software to display, plot and analyze the charge and discharge data. For detailed information about Logview, click here.
    Junsi iCharger 4010 DUO (2 x 1400W)

     Specifications:

    • Maximum charge power: 1400W per channel, or 2000W in synchronous mode
    • Charge current: 50mA-40A per channel, or up to 70A in synchronous mode
    • Discharge power: 130W per channel, or 200W in synchronous mode
    • Maximum regenerative discharge: 1400W per channel, or 2000W in synchronous mode
    • Maximum external discharge power capacity: 1600W @ 40V/40A, or 3200W in synchronous mode
    • Balance bleeding current: 1.2A per channel, or 2.4A in synchronous mode
    • Voltage readout resolution: 1mV (0.001V) Internal resistance readout resolution: 0.1 Omega Balance accuracy: 10mV
    • Input voltage range: 9-50V DC
    • Maximum Input current: 65A
    • Maximum LiPo/LiIo/LiFe(A123): 10S per channel and in synchronous mode
    • Maximum NiCd/NiMH battery cell count: 25 cells per channel
    • Maximum Pb battery cell count: 18 cells (36V) per channel
    • PC Connectivity: USB port
    • Dimensions: 210x140x80 mm
    • Weight: 1470g

    Extra functions:

    • Battery internal resistance measurements
    • Servo test
    • Pulse test
    • Store and read data from micro SD (TF) card

    SKU: MT1856
    €399.00
    inc. VAT

     72HR STOCK
  • KingKong Quadcopter Spare Parts USB Charger 1s

    KingKong Quadcopter Spare Parts USB Charger 1s

    KingKong Quadcopter Spare Parts USB Charger 1s

    SKU: KK-USB-CHARGER1S
    €3.90
    inc. VAT

     IN STOCK
  • Main Blade Grips Nano nCP X/CP S

    Main Blade Grips Nano nCP X/CP S

    Main Blade Grips w/Bearings: nCP X/CP S

    SKU: BLH3314
    €12.99
    inc. VAT

     LOW STOCK
  • MQR06 Charger with 4AA eneloop

    MQR06 Charger with 4AA eneloop

    MQR06 Charger with 4x AA  eneloop

    The microprocessor controlled quick-charger MQR06 is perfectly made for the demanding user. The plug is molded to the case for direct use into an A/C wall socket. If you take off the European plug, you will be able to use the US-plug, which is placed behind it. A very special feature is the individual charging, whereas each single cell gets charged on its own. The charging progress gets checked and ended for each single cell via Peak-Cut-Control.

    • Peak-Voltage-Detection: yes
    • Timer & Temperature Control :yes
    • Dry Cell Charge Protection: yes
    • Charging Possibilities   :1, 2, 3 or 4 rechargeable AA/AAA
    • Universal Voltage Power Supply:   yes
    • Input   AC 100-240V ~, 50-60Hz, 7W:

    Approx. charging time for eneloop AA & AAA   

    • 1 x AA: 75 min, 2 x AA: 110 min, 4 x AA: 220 min
    • 1 x AAA: 65 min, 2 x AAA: 100 min, 4 x AAA: 200 min

    Size & Weight   

    68 x 112 x 64 mm, approx. 116 g

    SKU: F734S1217
    €48.00
    inc. VAT

     72HR STOCK
  • MQR06 Charger with 4AA XX eneloop

    MQR06 Charger with 4AA XX eneloop

    MQR06 Charger with 4x AA XX 2500 eneloop  Model MQR06-E-4-3UWXB

    The microprocessor controlled quick-charger MQR06 is perfectly made for the demanding user. The plug is molded to the case for direct use into an A/C wall socket. If you take off the European plug, you will be able to use the US-plug, which is placed behind it. A very special feature is the individual charging, whereas each single cell gets charged on its own. The charging progress gets checked and ended for each single cell via Peak-Cut-Control.

    • Peak-Voltage-Detection: yes
    • Timer & Temperature Control :yes
    • Dry Cell Charge Protection: yes
    • Charging Possibilities   :1, 2, 3 or 4 rechargeable AA/AAA
    • Universal Voltage Power Supply:   yes
    • Input   AC 100-240V ~, 50-60Hz, 7W:

    Approx. charging time for eneloop AA & AAA   

    • 1 x AA: 75 min, 2 x AA: 110 min, 4 x AA: 220 min
    • 1 x AAA: 65 min, 2 x AAA: 100 min, 4 x AAA: 200 min

    Size & Weight   

    68 x 112 x 64 mm, approx. 116 g

    SKU: F734S1224
    €50.00
    inc. VAT

     72HR STOCK
  • Power supply PJ1 1360W 24V 60A Ev-Peak Charger

    Power supply PJ1 1360W 24V 60A Ev-Peak Charger

    P series is the professional high power high output power supply. With active PFC technology, It is capable of correction on AC input voltage and universal on a global basis.

    PJ1 is a high power, adjustable double channel DC output, the maximum can ascend to 1350W / 60A switching power supply.

    Specifications :

    • Input voltage: 110-240V
    • Output voltage: 12V to 24V
    • Max power : 1360W
    • Max. Intensity : 60A
    • Over-current protection: 65A
    • Ventilation cooling
    • Dimensions: 235x285x85mm
    • Mass: 3400g
    SKU: 205-PJ1
    €229.00
    inc. VAT

     LOW STOCK
  • Prolux DC 12V Glow Start Charger

    Prolux DC 12V Glow Start Charger

    This DC12V quick glow start charger offers a quick charge time of 20 minutes for glow starters, providing it with enough energy to start the engine. Simply connect the charger to a 12v power source, the attach a glow starter onto the charger. Then, press the START button. After charging will automatically switch to a trickle charge rate of 50mA for as long as it is connected, allowing you to safely charge the battery to full capacity.

    Features:

    • DC 12V equipment
    • Convinient and easy to use
    • By switch with two functions: trickle and fast charge
    • IC switching transfer
    • Fast charging current 1000 mA (max): Charging time 20 minutes.
    SKU: PX2645
    €12.90
    inc. VAT

     LOW STOCK
  • Prophet Sport LiPo 35W AC Charger

    Prophet Sport LiPo 35W AC Charger

    Prophet Sport LiPo 35W AC Charger

    The Prophet™ Sport Li-Po charger is ideal for sport hobbyists. This affordable, durable and full-powered AC charger can be utilized for surface, air and marine RC charging purposes. With the ability to handle 2S to 3S Li-Po batteries and a range of selectable currents, the Prophet Sport Li-Po is an asset to any hobby collection. All of this is proudly backed by a Dynamite® 5-year warranty.

    Features:

    • 35W charge power output for Li-Po (2–3S) batteries
    • High-visibility, simplified user interface
    • Select charge current from 0.5A to 3.0A with a single push button
    • Six red LEDs indicate charging current
    • Three LEDs (red, yellow and green) indicate charging status
    • Start/Stop a charge cycle with a single button
    • Audible beep alerts
    • Removable AC power cord
    • Short-circuit, over-current, reverse polarity, low input voltage and over-temperature protection
    • Meets IP33CW, IK07 environmental specs
    • Rugged industrial plastic case
    SKU: DYNC2005
    €34.00
    inc. VAT

     LOW STOCK
  • PU5 500W 15V 33A Ev Peak Power unit

    PU5 500W 15V 33A Ev Peak Power unit

    The PU5 500W 15V 33A Ev Peak Power unit can deliver 33A under 15V AC.

     

    • Input voltage: 110-240V
    • Output voltage: 15V
    • Max power : 500W
    • Max. Intensity : 33A
    • Over-current protection: 36A
    • Ventilation cooling
    • Dimensions: 108x235x55mm Weight: 1300g

     

     

     

     

    SKU: 205-PU5
    €79.00
    inc. VAT

     LOW STOCK
  • RadioLink CB86-PLUS Li-Po Balance Charger (8-Packs Charging simultaneous)

    RadioLink CB86-PLUS Li-Po Balance Charger (8-Packs Charging simultaneous)

    Reliable charging on a giant scale” .Never be without Charge:

    At a competition and you need to make sure that you have enough batteries to last. The New CB 86 Battery Charger is designed for you. With its ability to charge up to 8 batteries simultaneously you will never run out of power. The CB 86 is absolutely brimming with features, full balance charging, Lithium Polymer (Li-Po) and Lithium iron (Li-Fe) support, continuous and cyclic charging giving you the ability to charge all batteries at once, or set them up and charge them independently.
    Like all top of the line chargers the CB 86 has built in safeties giving you peace of mind when charging you batteries. With built in polarity sensor and vocal warnings the charger will keep you and your batteries safe. With added low and high voltage warnings, the CB 86 has all the features to back up its top of the line quality.

    Specs:

    • Eight battery charge simultaneous
    • Size: 188*104*57mm
    • Input voltage: 10.5~15V DC
    • Charge capability: LiPo/LiFePo 1S-6S
    • Charge current: 0.1-6.0A
    • Charge mode: Cycle charge and parallel charge
    • polarity protect: Yes
    • Voice warning: (ON/OFF)
    • Screen: LCD 192*64 resolution
    • Language: English
    • Discharge: yes
    • Watts: 210W
    SKU: CB86-PLUS
    €139.90
    inc. VAT

     LOW STOCK
  • Ripmax Sigma EQ Mini AC/DC Charger (Euro)

    Ripmax Sigma EQ Mini AC/DC Charger (Euro)

    Ripmax Sigma EQ Mini AC/DC Charger (Euro)

    The perfect 'no frills' charger for beginners and club modellers alike. Capable of charging Li-Po, Li-Fe, Nimh, Nicad, and Lead Acid batteries from 0.1 to 4.5A with balancing for the relevant Lithium technology plus Delta peak for Nimh and Nicad. That's a 1-4S Li-Po/Fife, a 1-10S Nimh/Nicad or a 6-12v Lead acid. The internal circuitry is limited to 45W and the current is automatically limited to prevent exceeding this, if the selected current is higher.

    Balancing accuracy is 5mv per cell (Lithium) and delta Peak accuracy 8mv for Nicad and 5mv for Nimh.

    Input power can be DC (11-15v) or AC (100-240v), making the choice of power very flexible, depending on whether you are at home or at the field/track/lake. It is fully protected for current overload and reverse output polarity.

    The outer case is fully metal for durability and a 'quality' look/feel.

    Supplied with a special multi plug balance adaptor board compatible with XH, TP, EH and PQ plugs on the one board. There is no need to buy another board to have full compatibility with all Lithium balance connectors. One main output lead is provided with a male 'T' connector on it already, making the Sigma EQ Mini easy to use with many of the ARTF models now on the market.

    Specifications:

    • Weight:    230g
    • Dimensions:    110 x 93 x 39mm

    Note: There is a mistake in the instructions on this charger, where it says 'High-performance rapid charger/discharger'' it is wrong, there is no battery discharge function.

    SKU: O-IP3040EU
    €59.90
    inc. VAT

     72HR STOCK
  • Ripmax Sigma EQ Touch AC/DC Charger (90W) Euro

    Ripmax Sigma EQ Touch AC/DC Charger (90W) Euro

    This high-performance, balance charger features the very latest ‘touch’ sensitive LCD screen for simple and logical programming. It is perfect for charging and discharging Li-Po, Li-Ion, Li-Fe, Ni-MH, Nicad and Lead Acid batteries. With a useful total charge current of up to 10A and a maximum limit of 90W total charge power, the Sigma EQ Touch will cater for a wide variety of battery types and ‘C’ ratings. The LCD screen provides graphical display of the charge/discharge process to help understand the condition of the pack and each cell in it (Lithium only with balance connector). There is a function for long term storage to help optimise your Lithium type batteries and prolong their life. Additional features such as an internal independent balancer and a digital power output make this a versatile charger. Input power can be 11~18v DC or 100~240v AC, so perfect for use at the field or at home. This euro version is supplied with a european style mains plug.

    Supplied with a universal balance board (XH,TP,EH and PQ), a DC input lead with removable crocodile clips and a ‘T’ type main battery connection lead as standard. Other leads are available from your local shop to suit different applications. An optional temperature sensor is also available.

    Specifications:
    • Input Voltage:    10 - 18V DC or 110 - 240V AC
    • Max Charge Power:    Max 90 Watts
    • Weight:    520g (18.3oz)
    • Dimensions:    146 x 148 x 58mm
    • LiPo:    1 - 6 cells
    • NiCad/Ni-MH:    1 - 16 cells
    SKU: O-IP3055/EUR
    €99.90
    inc. VAT

     72HR STOCK
  • Rotor Head Linkage Set (4) nCP X/CP S

    Rotor Head Linkage Set (4) nCP X/CP S

    This is a replacement Blade Rotor Head Linkage Set, and is intended for use with the Blade Nano nCP X/CP S.

    SKU: BLH3322
    €4.90
    inc. VAT

     IN STOCK
  • Servo Nano CP S Linear Long Throw 38mm Lead

    Servo Nano CP S Linear Long Throw 38mm Lead

    Servo Nano CP S Linear Long Throw 38mm Lead

    Product Specifications

    • Size Category:    Specialty
    • Type:    Analog
    • Torque: 3.5 oz (100 g) @ 3.7V
    • Speed:    0.10-0.14 sec end-to-end
    • Length: 0.87 in (22.0mm)
    • Width:    0.66 in (16.9mm)
    • Height:  0.33 in (8.2mm)
    • Weight:  0.1 oz (2.1 g)
    • Bushing Or Bearing:    Bearing
    • Bearing:    Single
    • Motor Type:    Brushed
    • Connector Type: JST-SHR 1.0 mm, 38mm lead
    • Gear Type:    Nylon
    • Voltage:    3.2–4.2V
    SKU: SPMSH2028L
    €17.90
    inc. VAT

  • Servo Pushrod Set Nano nCP X/CP S

    Servo Pushrod Set Nano nCP X/CP S

    Servo Pushrod Set with ball links: Blade nCP X/CP S

    SKU: BLH3308
    €5.70
    inc. VAT

  • Sigma EQ Twin AC/DC Charger  2x50W

    Sigma EQ Twin AC/DC Charger 2x50W

    The Sigma EQ Twin is the ideal charger for the electric modeller that is keen to charge and manage his batteries more quickly than one at a time!

    It has two totally independent circuits that can each handle charging, balance charging, fast charging, discharging and storage.
    Each charge circuit can deliver up to 5A and a maximum limit of 50W. All battery types (Li-Po, Li-Ion, Li-Fe, Ni-MH, Nicad and Lead Acid) can be accommodated according to their specific needs. There are 5 memories to store the data (charge or discharge) for your favourite batteries for easy recall when required.

    The advanced calculations used for each function deliver precise control, allowing optimised management of your batteries, enhancing their performance and life.
    Input power can be 11~18v DC or 110~240v AC. No need for an external power supply. Twin internal cooling fans keep temperatures under control. The Sigma EQ Twin has XH balance ports as standard and is supplied with two ‘T’ type main battery charge cables. A DC power input lead is provided with removable crocodile clips.

    Specification

    • Charge Current:  0.1 - 5A
    • Discharge Current: 0.1 - 1.0A    
    • Input Voltage: 10 - 18V DC or 180 - 240V AC
    • Max Charge Power: 2x 50 Watts    
    • Weight:760g
    • LiPo 1 - 6 cells
    • NiCad/Ni-MH: 1 - 15 cells

        

    SKU: O-IP3057
    €126.00
    inc. VAT

     72HR STOCK
  • SkyRC e3 LiPo (1-3S) Balance Charger

    SkyRC e3 LiPo (1-3S) Balance Charger

    This is the SkyRC e3 LiPo Balance Charger that provides you with one of the easiest and cheapest ways to charger your LiPo battery. The AC input is between 100-240V and the charge indication is via 3 LEDs on the charger; when the green light comes on, you're ready to go! This charger takes about 1.5 hours to charge a 11.1V 2200mAh battery.

    Specifications:

    • AC Input: 100-240V, 50-60Hz
    • Battery Type: LiPo
    • Cell Count: 1-3 cells
    • Charge Current: 1.2A Max
    • Cell Terminate Voltage: 4.2V ± 0.02V
    • Circuit Power: 11W ± 10%
    • Dimension: 88x57x35mm
    • Weight: 103g
    • Version: 2.0
    • Operational mode display: via 3 LEDs

     

    SKU: SK-E3-CHARGER
    €9.90
    inc. VAT

     IN STOCK
  • SKYRC Ultimate 1000W/40A Balance charger & discharger

    SKYRC Ultimate 1000W/40A Balance charger & discharger

    SKYRC Ultimate 1000W/40A Balance charger & discharger

    SKYRC Ultimate 1000W features with high efficiency with synchronous rectification technology, it is accurate and stable and also has some new features and functions.
    Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade.
    What's more, users could also use it as Lithium Battery Meter and Lithium Battery Internal Resistance Meter.
    There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.

    Specifications:

    • Weight     1240g
    • LiPo/LiFe/Lilon/LiHV Battery Cell Count 1-8S
    • DC Input Voltage 11-30V
    • Charge Circuit Power 1000W
    • Charge Current     Max. 40.0A
    • Balance Port Charge Current 10-500mA
    • Discharge Circuit Power 80W
    • Discharge Current 0.1-8.0A
    • Regenerative Discharge Current     0.1-40.0A
    • Current Drain for Balancing  Max. 800mA
    • NiMH/NiCd Battery Cell Count 1-20S
    • Trickle Charging Current 50mA-300mA & OFF
    • Pb Battery 2-24V
    SKU: SKY100069
    €179.90
    inc. VAT

     72HR STOCK
  • Spektrum DX8, DX9, DX7S, DX6 & DX18 International Air Transmitter AC Adapter

    Spektrum DX8, DX9, DX7S, DX6 & DX18 International Air Transmitter AC Adapter

    International Air Transmitter AC Adapter suitable for Spektrum DX8, DX9, DX7S, DX6 & DX18

    SKU: SPM9551
    €29.00
    inc. VAT

     LOW STOCK
  • Spindle Tool Set Nano nCP X/CP S

    Spindle Tool Set Nano nCP X/CP S

    Spindle Tool Set: Blade nCP X/CP S

    SKU: BLH3324
    €4.90
    inc. VAT

     LOW STOCK
  • Spindle with O-rings and Hardware nCP X/CP S

    Spindle with O-rings and Hardware nCP X/CP S

    BLH3313 Feathering Spindle with O-rings and Hardware


    Blade Nano nCP X/CP S Parts

    SKU: BLH3313
    €6.00
    inc. VAT

  • Tail Rotor MCPX2/Nano nCP X/CP S

    Tail Rotor MCPX2/Nano nCP X/CP S

    Tail Rotor for Blade MCPX2/Nano nCP X/CP S

    SKU: BLH3603
    €3.90
    inc. VAT

     72HR STOCK

Manufacturers

Back