Carbon Technology

Carbon Technology
Carbon Technology make best products from German Carbon

Products


  • Raptor 30/50 Tail Fin Set Silver

    Raptor 30/50 Tail Fin Set Silver

    Carbon Fiber vertical and horizontal tail fins for Raptor  30 or 50 size helicopters.
    Specifications: Material: Carbon +Glass Fiber
    Color: Silver
    SKU: RCM16234
    €19.60
    inc. VAT

     LOW STOCK
  • Stiffner plates For Robbe

    Stiffner plates For Robbe

    Fit directly to the side of heli with no extra parts required. Stiffens the whole helicopter up for a crisper responce.
    Due to removal of frame flex, clutch bearings & shoes last A LOT longer. Pre fitted, 3mm inserts to one side.
    Quality carbon from leading Carbon Tech manufaturer. Tests prove these plate remove flex to a noticable amount!!.

    Will fit All robbe Millenium helis

    SKU: SKU11195
    €29.00
    inc. VAT

  • Y6-COPTER

    Y6-COPTER

    This is a Y-COPTER combo set - main frame, landing gear and camera mount. Total weight ~620gr.

    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!


    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performace.

    =The 650 frame can be equipped in each arm with 1 or 2 motors, e.g 3 motors and if added also pusher motors, it can be 6.

    =Max pick up weight is up to 2.9 kg ( nett Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~420gr,
    - size between motor axes ~650mm
    - equipped with single-battery slider system (it`s possible to fit till to 4s 6000mAh lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos TGY930. Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery tray, for easy battery replacement.

    -Landing gear, Height is 205mm, width between skids = 400mm. Weight ~110gr.
    All other electronic parts/ Motors and camera are not included in the set

    SKU: SKU42172
    €399.00
    inc. VAT

     LOW STOCK
  • Y6-COPTER COMBO

    Y6-COPTER COMBO

    This is a Y6 Combo set with all you need to complete( NO RADIO/.LIPO) included, please note that the frame is Pre-built, and components are NOT installed.

    We deliver a quality controller which is perfect to fly and train, and can be expanded with GPS and other add ons.

    Frame is made from Carbon. This machine is produced in Europe. Same frame can be found under other brands for higher cost.

    Included:

    -1 x MWC or KK flight controller
    -6 x BL Motors Avizar suitable for this frame configuration.
    -6 x APC or equal props suitable for this configuration
    -6 x 20-30 Amps Speed controllers( For expert-possible to have programmable)
    -1 x Led strip for easy orientation
    -6 x Prop Adaptor


    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!


    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performance.

    =The 650 frame can be equipped in each arm with 1 or 2 motors per Arm.

    =Max pick up weight is up to 2.9 kg ( net Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~420gr,
    - size between motor axes ~650mm
    - equipped with single-battery slider system (it`s possible to fit till to 4s 6000mAh lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos . Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery tray, for easy battery replacement.

    -Landing gear, Height is 300 mm, width between skids = 400mm. Weight ~110gr.

    SKU: SKU42172PD
    €659.00 €890.00
    inc. VAT

     LOW STOCK
  • Y6-COPTER EXTENDED

    Y6-COPTER EXTENDED

    This is an EXTENDED Y-COPTER - main frame, landing gear and camera mount. Size +-900mm, FrameTotal weight ~820 gr.

    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!


    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performace.

    =The 900 frame can be equipped in each arm with 1 or 2 motors, e.g 3 motors and if added also pusher motors, it can be 6.

    =Max pick up weight is up to 5 kg ( nett Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~620gr,
    - size between motor axes ~900mm
    - equipped with Dual-battery slider system (we recommend 2 x 3s 5000 lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos TGY930. Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery tray, for easy battery replacement.

    -Landing gear, Height is 205mm, width between skids = 400mm. Weight ~110gr.

    All other electronic parts/ Motors and camera are not included in the set

    SKU: SKU42172EX
    €249.00
    inc. VAT

     LOW STOCK

Manufacturers