AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • Futaba Heavy-Duty Servo Extension 10cm

    Futaba Heavy-Duty Servo Extension 10cm

    This is a Heavy Duty Futaba J-Series extension cable, 10cm long, made from 22awg wire

    SKU: HT-A1410
    €5.00
    inc. VAT

  • FVT LittleBee 20A PRO ESC

    FVT LittleBee 20A PRO ESC

    One of the most Favorite ESCs finally got an upgrade! With this ESCs brand new F396 MCU processor, it is able to handle the higher RPM motors with ease. The processor on this ESC runs nearly twice as fast as the previous version, 48Mhz. It has also been equipped with a bit more flash memory and RAM. Designed to be compact and lightweight, this may be the perfect choice for many of the FPV Racers and Acro flyers! Thrust results to come. One of the smallest ESCs on the market for its size but can keep up with the bigger brothers. FVT LITTLEBEE 20A PRO ESCs supports 2-4s lipos, are mosfet driven and with fast, dedicated driver chips on a high quality PCB.

    Specifications:

    • Input: 2-4s Lipo
    • Constant: 20 Amps
    • Burst: 30 Amps(10 seconds)
    • Weight: 6g w/wires
    • Dimensions: 24.5 x 12.5 x 3mm
    • Motor wire: 50mm 20g
    • Signal wire: 100mm 22g
    • MCU: Silabs F396 @ 48Mhz
    • PCB - 4 Layer Blind Pole PCB - 3oz Pour
    • Mosfet: N-Channel
    • BEC: None

     

    SKU: LITTLEBEE20A
    €12.00
    inc. VAT

     IN STOCK
  • FVT LittleBee 30A OPTO ESC

    FVT LittleBee 30A OPTO ESC

    FVT LittleBee 30A ESC BLHeli OPTO 2-6S Supports OneShot125 For RC Multirotors.New 30A version of the famous FVT Little Bee ESC, the BLheli speed controller of choice for high-performance power and reliability. These ESCs arrive factory-flashed with BLheli firmware with OneShot125 and active braking support. The 30A variant supports a continuous current of 30 amps and bursts of 40A and yet still retains tiny dimensions for its class.

    Multi - Littlebee 30A ESC, small size, light weight, fast response, support 2-6SLIPO, also supports Light Damped, is the best Mini multi axis power transfer

    Features:

    • Input Voltage:2-6S Lipo
    • BEC Output:No
    • Continue Current:30A,Burst Current:35A up to 10S
    • Size:35*17
    • Weight:11g(include Wire)
    • Support Damped mode
    • Main IC:SILABS C8051F394
    • MOS:ALL N FET
    • Firmware: BLheli 14, OneShot ready

     

    SKU: LITTLEBEE30A
    €15.00
    inc. VAT

     IN STOCK
  • GoPro Hero 3 Adapter Cable for FPV Video Tx

    GoPro Hero 3 Adapter Cable for FPV Video Tx

    GoPro Hero 3 Adapter Cable for FPV Video Tx

    • 10 Pin Gopro 3 usb audio video cable with 2 connectors
    • 20 cm Cable length
    • Only 5g in weight
    • Easy to install with most FPV Video Transmitters
    • Black : Ground (GND)
    • Red : Audio Out
    • White : Video Out
    SKU: GPC03-90
    €7.00
    inc. VAT

     IN STOCK
  • Gopro Hero3 AV Video Cable Flat design

    Gopro Hero3 AV Video Cable Flat design

    Designed for GOPRO HERO3 camera output
    video and charging  cable to use, this USB cable has a video  output and
    a 5V external  power supply input. Or use BEC charging (black version
    GOPRO HERO3 only  use original battery to boot, silver version GOPRO
    HERO3 BEC can not  install battery-powered boot).
    SKU: DJIPH001
    €6.00
    inc. VAT

     IN STOCK
  • GPS Black Cover Case Shell  Neo6m 6H MTK Ublox

    GPS Black Cover Case Shell Neo6m 6H MTK Ublox

    Black Cover Case Shell for GPS Antenna Neo6m 6H MTK Ublox

    Perfect for Open source Self kits as MultiWii/Ardu pilot, etc.

    SKU: GPSCOV1
    €8.00
    inc. VAT

     LOW STOCK
  • GPS square Protective Case Shell w/GPS Straight Mount Set, Ublox

    GPS square Protective Case Shell w/GPS Straight Mount Set, Ublox

    GPS square Protective Case Shell w/GPS Straight Mount Set, Ublox and other brands.

    Features:

    • Color: Light Brown
    • Outer size: 4x4x1.5cm

    Package Included:

    • GPS protective case
    • GPS straight Mount
    SKU: GPSCOVSQ
    €9.00
    inc. VAT

     IN STOCK
  • Gyro Mounting Pads (4 pcs)

    Gyro Mounting Pads (4 pcs)

    Fits All Gyros, servos and more !!

    These 3m high quality Gyro and receiver mounting pads are double sided tape which is used to both securely hold the gyro in place but just as importantly act as a dampener between the frame and the gyro.
    This allows for shock absorption from the Helicopters natural vibration.
    Each pad is cushioned to help to eliminate vibration.

    4 PCS in set

    SKU: RCT0025
    €3.50 €4.00
    inc. VAT

     IN STOCK
  • H150 150mm Carbon Fiber Quadcopter Frame Kit for FPV RACING

    H150 150mm Carbon Fiber Quadcopter Frame Kit for FPV RACING

    H150 RC Helicopter Parts MIni 150mm 4-Axis Carbon Fiber Frame kit fpv RACER

    • Specification:
    • Upper board: 1.5mm
    • Height: 30mm
    • Material: carbon fiber
    • Wheelbase : 150mm
    • Flight controller install hole distance : 30x30mm
    • Motor mount bolt holes: 8/12mm
    • Support 3 inch propeller (Max.)
    • Recommend motor: 1104, 1306

     

    SKU: H150QUAD
    €21.00
    inc. VAT

     LOW STOCK
  • Hawk TX Switch Cap Red V3+ (Flat Bottom, Futaba TX, FrSky X9D)

    Hawk TX Switch Cap Red V3+ (Flat Bottom, Futaba TX, FrSky X9D)

    Tired of Stock switch and cap color? Time to refresh your Futaba TX
    New V3+ version, comes with metallic cap stickers
    Gives you more options to customize your Transmitter

    Included:

    • Switch Cap (Flat Bottom) *8pcs
    • Cap Sticker *8pcs
    SKU: HC-SC3-R
    €10.00
    inc. VAT

     IN STOCK
  • HD 700TVL CCD Mini CCTV FPV Camera 2.8-12mm Focus Zoom Lens

    HD 700TVL CCD Mini CCTV FPV Camera 2.8-12mm Focus Zoom Lens

    This is a FPV PCB board camera 1/3 Inch Sony CCD, 700TVL high resolution 2.8-12mm Manual Focus Zoom lens.

    Availiable as combo with camera or separately.- Lens only

    Feature:

    •     Ultra Mini size. Hassle free. Plug and play.
    •     DSP: Next chip 2090, 700TVL high resolution
    •     Advanced image sensor. great video quality.
    •     Sensor : Sony 1/3" CCD
    •     2.8-12mm Manual Focus Zoom lens
    •     2D NR: 2D digital noise reduction.

    Specifications :

    • Device     1/3 Inch Sony CCD Nextchip 2090
    • Picture Elements     NTSC: 976 x 494,PAL: 976 x 582
    • Resolution     700TVL
    • Min. Illumination     0.1 Lux / F1.2
    • S/N Ratio     More than 48dB
    • Electronic Shutter     1/50(60) to 1/100,000
    • White Balance     Auto
    • AGC     Auto
    • Color/Black and White  auto/color/black and white/external trigger
    • BLC     on/ off
    • Privacy Mask     on/ off (8 setting areas)
    • Sync. System     Internal synchronism
    • Video Output     1 Vp-p / 75 Ohm
    • Power Requirements     DC 12V  ±10%
    • Power Consumption     80 mA
    • Operating Temp.     -10C to +50C ( 14F to 122F )
    • Operating Humidity     20 to 80 %
    • Storage Temp.      -40C to +60C ( -40F to 140F )
    • Storage Humidity     20 to 95 %
    • Dimension     32 x 32mm + 38 x 38mm
    SKU: FPVZOOM
    €21.00
    inc. VAT

     LOW STOCK
  • HD Color Camera PAL 600TVL 120 Degree Wide Angle suitable for FPV

    HD Color Camera PAL 600TVL 120 Degree Wide Angle suitable for FPV

    FPV HD Color Camera Module 600TVL 120 Degree Wide Angle

    • Sensor: 1/4 inch HD Color CMOS
    • Format: PAL
    • Effective pixel: PAL=720(H)*576(V)
    • Definition: 600TVL Lines
    • Minimum brightness: 0.01lux
    • View angle: 120degree
    • AV output: 1.0Vp-p/75Ω
    • Power consumption: 95mA+/-10%
    • SNR: >50DB
    • Electronic shutter: (P)1/50-1/10000s
    • Work voltage: DC5-15V +/-10%
    • Dimension: 21*21*28mm
    • Work environment: 0℃~45℃ RH95%  Max
    • Weight: 15g
    • Lens:2.5MM color full glass 120 degrees wide angle lens, M12 thread.

    Included
    1 x 1/4 CMOS HD Color Camera Module

    SKU: CAMFPV600TVL
    €59.00
    inc. VAT

  • Headless Screw M3X3 (10pcs)

    Headless Screw M3X3 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: RCCS-014
    €3.00
    inc. VAT

     IN STOCK
  • Headless Screw M4X4 (10pcs)

    Headless Screw M4X4 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: RCCS-015
    €3.00
    inc. VAT

     IN STOCK
  • Headless Stainless Steel Flat-end Set Screws M3X5 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M3X5 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M3X5 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: RCM20427
    €3.00
    inc. VAT

     IN STOCK
  • Headless Stainless Steel Flat-end Set Screws M3X6 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M3X6 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M3X6 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: HEADLESS36
    €3.00
    inc. VAT

     IN STOCK
    NEW
  • Headless Stainless Steel Flat-end Set Screws M3X8 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M3X8 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M3X8 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: HEADLESS38
    €3.00
    inc. VAT

     IN STOCK
    NEW
  • Headless Stainless Steel Flat-end Set Screws M4X6 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M4X6 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M4X6 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: HEADLESS46
    €3.00
    inc. VAT

     IN STOCK
    NEW
  • Headless Stainless Steel Flat-end Set Screws M4X8 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M4X8 (10pcs)

    Headless Stainless Steel Flat-end Set Screws M4X8 (10pcs)

    Made from Hardened metal, black color, Pack of 10

    SKU: HEADLESS48
    €3.00
    inc. VAT

     IN STOCK
    NEW
  • Heavy Duty Autorotation Hub for Mikado Logo 500 to 690 SE/SX

    Heavy Duty Autorotation Hub for Mikado Logo 500 to 690 SE/SX

    Heavy Duty Autorotation Hub for Mikado Logo 500 to 690 SE/SX

    this is an upgrade to standard hub, using stronger Japan made bearing .The hub itself is made from CNC 7075 aluminium, black anodized

    SKU: HC-L600AH
    €25.99
    inc. VAT

     IN STOCK
  • Heavy Duty Ball Links with ball M2.5X27

    Heavy Duty Ball Links with ball M2.5X27

    This is a set of Heavy-Duty Ball Links for use with M2.5 Threaded Rods.
    Perfectly can be used on helicopters, Airplanes, cars and boat.

    Size of ball link:
    • Length 27mm( end to end)
    • Rod diameter tread- 2.5 M
    • Ball mounting screw-M3
    • Set of 2 links with hardware
    FEATURES:

    • White nylon link construction
    • Brass swivel-ball construction
    • Beveled brass swivel-ball stand-off
    • Hex-Head machine mounting screw
    SKU: AV023-00509
    €3.90
    inc. VAT

     IN STOCK
  • Heavy Duty Ball Links with ball M2X26 (2pcs)

    Heavy Duty Ball Links with ball M2X26 (2pcs)

    This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
    Perfectly can be used on helicopters, Airplanes, cars and boat.

    Size of ball link:

    • Length 26mm( end to end)
    • Rod diameter tread-M2-2.5
    • Ball mounting screw-M2
    • Set of 2 links with hardware

    FEATURES:
     

    • BLACK nylon link construction
    • Brass swivel-ball construction
    • Beveled brass swivel-ball stand-off
    • Hex-Head machine mounting screw
    SKU: AV023-00502A
    €3.90
    inc. VAT

     IN STOCK
  • Heavy Duty Ball Links with ball M2X30

    Heavy Duty Ball Links with ball M2X30

    This is a set of Heavy-Duty Ball Links for use with M2 Threaded Rods.
    Perfectly can be used on helicopters, Airplanes, cars and boat.

    Size of ball link:

    • Length 19mm( end to end)
    • Rod diameter tread-M2
    • Ball mounting screw-M2
    • Set of 2 links with hardware

    FEATURES:
     

    • Black nylon link construction
    • Brass swivel-ball construction
    • Beveled brass swivel-ball stand-off
    SKU: AV023-00506
    €3.90
    inc. VAT

     IN STOCK
  • Heavy Duty Ball Links with ball M3X27

    Heavy Duty Ball Links with ball M3X27

    This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
    Perfectly can be used on helicopters, Airplanes, cars and boat.

    Size of ball link:
    • Length 27mm( end to end)
    • Rod diameter tread- M3
    • Ball mounting screw-M2
    • Set of 2 links with hardware
    FEATURES:

    • White nylon link construction
    • Brass swivel-ball construction
    • Beveled brass swivel-ball stand-off
    • Hex-Head machine mounting screw
    SKU: AV023005
    €3.90
    inc. VAT

     IN STOCK

Manufacturers