AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • DUO Diversity 5.8GHz 48CH (RaceBand) receiver RD945 with auto Scan ,LCD screen

    DUO Diversity 5.8GHz 48CH (RaceBand) receiver RD945 with auto Scan ,LCD screen

    The Boscam RD945 is  one of the best FPV receivers on the market and now it has been made even better thanks to its recent upgrade, which provided an additional 8 channels to make it RaceBand compatible. Note that it still offers all of the 32 traditional FPV channels, so it's fully compatible with other 5.8Ghz gear on the market including Fatshark & ImmersionRC gear.

    In addition to the RD945's wide range of frequencies, it also boasts many other features including, a true 40 channel diversity receiver with dual AV outputs which can be used to feed a monitor or goggles; auto channel search at the push of a button, and a clear LCD display that shows band/channel and the actual frequency number. It also supports a wide input voltage range 6-28v making it compatible with most power sources, including LiPo batteries. Finally, we're also impressed with the construction of the RD945. The Rx is contained within a durable metal case, which also acts to shield the receiver increasing its sensitivity.

    Why do I need a diversity reciever?

    A diversity receiver is essentially two receivers all in one. In essence, it allows you two mix and match antennas for a solid video link. So it might be that you select a circular polarised omnidirectional antenna, which will provide good reception in all directions in the near field, and a directional high gain patch antenna for long distance flights. The diversity receiver is clever in that it will seamlessly switch between the receiver with the strongest signal.

    What is RaceBand?

    RaceBand was first pioneered by ImmersionRC to allow more pilots to race together without interferance. Essentially, RaceBand is just another set of 5.8Ghz frequencies, to be specific they are: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917. The difference between the RaceBand and the other 5.8Ghz bands is that RaceBand frequencies are more spread out across its band (37mhz separation) thus allowing more pilots to fly FPV together without their video feeds causing interference with each others.

    Note that many shops are still selling the the old FR632 32-channel version, which does not support RaceBand.

    Features:

    •     48 channels / 6 Bands - includes Race Band channels compatible with Fatshark & ImmersionRC gear
    •     Auto channel scan and lock on
    •     True 5.8GHz 32CH diversity system with indicator
    •     Dual buffered AV output for DVR or second monitor
    •     LCD display, frequency and channel synchronous display
    •     Power off channel memory

    RECEIVER Frequency:

        FR1 to FR6 Bands
     

    For best range and video link stability we recommend using circular-polarized, Patch or Helical Antenna Set (SMA), see 'related products' below.

    SKU: BOSCFR632
    €79.90
    inc. VAT

     IN STOCK
  • eMAX Talon Wrench For fpv RACER Series Motors (1pc)

    eMAX Talon Wrench For fpv RACER Series Motors (1pc)

    eMAX Talon Wrench For fpv RACER Series Motors Excellent looking and practical tool. (1 Toll RED color).

    SKU: EMX-AC-1699
    €5.80
    inc. VAT

     IN STOCK
  • Equalizer-adaptor EH (2-6S)

    Equalizer-adaptor EH (2-6S)

    Quantum Balance Adaptor EH Q-B-0007 2-6S
    SKU: Q-B-0007
    €4.00 €6.00
    inc. VAT

     IN STOCK
  • eTB RACER Multicopter 250 FPV Racing Quad Assembled

    eTB RACER Multicopter 250 FPV Racing Quad Assembled

    This is the latest FPV 250 racing quad assembled released to the market. Its powerful and extremely durable. Take it as a Basic set or combo.

    This model is a bit different from the etb250 kit, using same arms and electronics, but a bit different frame set. it has integrated CC3D, Better PCB with led switch, and it has dampening mount for camera. Comes in Hard foam mouse box which can be used as carry box.

    This 250 Base kit including

    •     eTB RACER Multicopter 250 FPV Racing Quad Assembled (Carbon Frame, Tough Plastic Arms)
    •     2204 Brushless Motors X 4
    •     18a SimonK Brushless ESC's X 4
    •     5X3" Propellers X 4
    •     CC3D Flight Controller
    •     2 High Intensity White LED's Front (On/Off Via Switch)
    •     1 High Intensity Blue LED Rear (On/Off Via Switch)
    •     Dampened Carbon Top Plate For Small Camera

    The combo version will include the Base kit and as well the following:

    • 25mw EC legal Video TX
    • Spyro antenna
    • 700 TVL Sony Color camera
    • 1300-1800 3s lipo battery
    SKU: ETB250AS
    €169.00
    inc. VAT

    
  • Extension Cable for Antenna RP SMA Male to RP Female-20CM

    Extension Cable for Antenna RP SMA Male to RP Female-20CM

    Extension Cable for Antenna RP SMA Male to RP Female-20CM  - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 20cm

    SKU: SMAEXT2
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 5cm

    SKU: RPSMAEXT6
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 5cm

    SKU: SMAEXT4
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna SMA jack to SMA plug,10cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug,10cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug, 10cm , 90 Degrees - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 10cm

    SKU: SMAEXT5
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna SMA Male to Female-20CM

    Extension Cable for Antenna SMA Male to Female-20CM

    Antenna extension - Extension Cable for Antenna SMA Male to Female,20CM  - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 20cm

    SKU: SMAEXT1
    €6.00
    inc. VAT

     IN STOCK
  • FPV led light board 3 leds with cable R/G/B

    FPV led light board 3 leds with cable R/G/B

    Light your Racer. Fits perfectly The new Sky hero Anakin ( you need 2 leds ) and many other quads. Make yours glowing in the dark.

    Specs:

    • 3 x 3528 LED's on board, means a lot of Light
    • Input: 3-4s lipo
    • Weight: 0.7gr
    • Size: 26 x 7 x 3. m
    • Availiable colors: Red / Green / Blue

    Pre-soldered 20cm wire

    Set inclusive of 1 led. double side sticker for easier attachment is included.

    SKU: S-3528-RED
    €4.50
    inc. VAT

     IN STOCK
  • FPV led light board 6 leds

    FPV led light board 6 leds

    Light your Racer. Fits perfectly any racers, helis, airplaines.Make yours glowing in the dark.

    Specs:

    • 6 x5730 LED's on board, means a lot of Light
    • Input: 3-4s lipo
    • Weight: 1.5 gr
    • Size: 50 x 9 x 2.5mm
    • Availiable colors: Red / Green / Blue

    Set inclusive of 1 led board, choice of colors.
    Double side sticker for easier attachment is included.

    SKU: L-5730-RED
    €4.50
    inc. VAT

     IN STOCK
  • FPV Monitor Transmitter Foulding Mount Bracket

    FPV Monitor Transmitter Foulding Mount Bracket

    Want to be able to mount a small display onto your radio transmitter ? , now you can with our Carbon Fiber FPV monitor mount

    • 7-8 inch FPV Monitor Mount to Futaba/JR/other Transmitters
    • You can mount your FPV monitor to your transmitter using this monitor mount.
    • Suitable for 7-8 inch monitors:
    • Compatible transmitter type: Transmitters with metal bar type handle. (like Futaba 9C, 10C, JR 9-ch, etc. )

    * This monitor mount only suits for transmitters with thin metal bar type handle as shown on below picture.

    SKU: FPVFB1
    €19.00
    inc. VAT

     LOW STOCK
  • FPV multicopter quad Foam Landing Pads (FEETS)

    FPV multicopter quad Foam Landing Pads (FEETS)

    3m branded foam landing feets in a pack of 4 pieces. perfect to protect your mini quad.

    Set including 4 pcs

    Colors: Black, Brown ,Orange

    SKU: PADBL
    €2.85
    inc. VAT

     IN STOCK
  • FPV Pan Tilt CMOS 720*480 HD Mini FPV Camera

    FPV Pan Tilt CMOS 720*480 HD Mini FPV Camera

    •   Combo with Pan/Tilt which is operated with 2 per-installed servos (Controllable).
    •   High Definition.
    •   Light Weight ~56g with Pan/Tilt.
    •   Controllable angle.
    •   Suitable for FPV use such as R/C UAV, Quad, Helicopter and etc.

    Further Information:

    •   Image Frame Number 25 Frames
    •   Lowest Lighting: 2 LUX /F1.2 (without infrared lamp)
    •   Sound without microphone
    •   Supply Current: 80mA
    •   Output Video Range: 1Vp-p
    •   Output Video Impedance: 75 Ω
    •   Output Audio Range: At maximum to3Vp-p
    •   Output Audio Impedance: 10K Q
    •   Waterproof State: Not available to rain proof
    SKU: CM210
    €69.00
    inc. VAT

     72HR STOCK
  • FPV Sony NEX Mini HDMI to AV Converter Card Set Cable

    FPV Sony NEX Mini HDMI to AV Converter Card Set Cable

    Sony NEX series Converting Card/ HDMI Convert to AV to Analog Signal for FPV Aerial Photography
     
    Product Description:

    • Specialized design for fields in Aerial Photography and special needs of weight and volume.
    • Small volume and weighs only 4g. It is necessary for FPV micro aerial photography and brushless cradle head.
    • Professional for Sony NEX series, direct connection by ultra-soft silicone-line.
    • Straight to HDMI D-type port, compatible for most equipment with mini HDMI standard interface.
    • Direct power supply for camera without external electric; direct connection to transmitter without HDMI line.
    • The HDMI output mode of camera must be set to Auto; otherwise it will not be output correctly.
    SKU: HDMIAV
    €52.00
    inc. VAT

     IN STOCK
  • FTDI Basic Breakout Arduino USB-TTL 6 PIN 3.3 5V

    FTDI Basic Breakout Arduino USB-TTL 6 PIN 3.3 5V

    Breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

    The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is DTR. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

    There are pros and cons to the FTDI Cable vs the FTDI Basic. This board has TX and RX LEDs that allow you to actually see serial traffic on the LEDs to verify if the board is working, but this board requires a miniB cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.

    SKU: FTDI
    €9.90
    inc. VAT

     IN STOCK
  • Fuel Line Retaining Clips 2Pcs

    Fuel Line Retaining Clips 2Pcs

    Fuel line retaining clips, suits silicone fuel tubing with an O/D of 5mm.

    set of 2

    SKU: HY2304
    €2.90
    inc. VAT

     IN STOCK
  • FUTABA 18SZ Protector Wraps Carbon Symphony Blue/Purple

    FUTABA 18SZ Protector Wraps Carbon Symphony Blue/Purple

    Designed to refresh your 18SZ in nice cool outlook!

    SKU: RCM18SZ-CTR01
    €25.00
    inc. VAT

     IN STOCK
  • FUTABA 18SZ Protector Wraps Skin Carbon Black

    FUTABA 18SZ Protector Wraps Skin Carbon Black

    Designed to refresh your 18SZ in nice cool outlook!

     

     

    SKU: RCM18SZ-CBK
    €25.00
    inc. VAT

     IN STOCK
  • FUTABA 18SZ Protector Wraps Symphony Blue/Purple

    FUTABA 18SZ Protector Wraps Symphony Blue/Purple

    Designed to refresh your 18SZ in nice cool outlook!

    SKU: RCM18SZ-TR01
    €25.00
    inc. VAT

     IN STOCK
  • Futaba Heavy-Duty Servo Extension 10cm

    Futaba Heavy-Duty Servo Extension 10cm

    This is a Heavy Duty Futaba J-Series extension cable, 10cm long, made from 22awg wire

    SKU: HT-A1410
    €5.00
    inc. VAT

  • FVT LittleBee 20A PRO ESC

    FVT LittleBee 20A PRO ESC

    One of the most Favorite ESCs finally got an upgrade! With this ESCs brand new F396 MCU processor, it is able to handle the higher RPM motors with ease. The processor on this ESC runs nearly twice as fast as the previous version, 48Mhz. It has also been equipped with a bit more flash memory and RAM. Designed to be compact and lightweight, this may be the perfect choice for many of the FPV Racers and Acro flyers! Thrust results to come. One of the smallest ESCs on the market for its size but can keep up with the bigger brothers. FVT LITTLEBEE 20A PRO ESCs supports 2-4s lipos, are mosfet driven and with fast, dedicated driver chips on a high quality PCB.

    Specifications:

    • Input: 2-4s Lipo
    • Constant: 20 Amps
    • Burst: 30 Amps(10 seconds)
    • Weight: 6g w/wires
    • Dimensions: 24.5 x 12.5 x 3mm
    • Motor wire: 50mm 20g
    • Signal wire: 100mm 22g
    • MCU: Silabs F396 @ 48Mhz
    • PCB - 4 Layer Blind Pole PCB - 3oz Pour
    • Mosfet: N-Channel
    • BEC: None

     

    SKU: LITTLEBEE20A
    €17.00
    inc. VAT

     IN STOCK
  • FVT LittleBee 30A OPTO ESC

    FVT LittleBee 30A OPTO ESC

    FVT LittleBee 30A ESC BLHeli OPTO 2-6S Supports OneShot125 For RC Multirotors.New 30A version of the famous FVT Little Bee ESC, the BLheli speed controller of choice for high-performance power and reliability. These ESCs arrive factory-flashed with BLheli firmware with OneShot125 and active braking support. The 30A variant supports a continuous current of 30 amps and bursts of 40A and yet still retains tiny dimensions for its class.

    Multi - Littlebee 30A ESC, small size, light weight, fast response, support 2-6SLIPO, also supports Light Damped, is the best Mini multi axis power transfer

    Features:

    • Input Voltage:2-6S Lipo
    • BEC Output:No
    • Continue Current:30A,Burst Current:35A up to 10S
    • Size:35*17
    • Weight:11g(include Wire)
    • Support Damped mode
    • Main IC:SILABS C8051F394
    • MOS:ALL N FET
    • Firmware: BLheli 14, OneShot ready

     

    SKU: LITTLEBEE30A
    €19.00
    inc. VAT

     IN STOCK
  • GoPro Hero 3 Adapter Cable for FPV Video Tx

    GoPro Hero 3 Adapter Cable for FPV Video Tx

    GoPro Hero 3 Adapter Cable for FPV Video Tx

    • 10 Pin Gopro 3 usb audio video cable with 2 connectors
    • 20 cm Cable length
    • Only 5g in weight
    • Easy to install with most FPV Video Transmitters
    • Black : Ground (GND)
    • Red : Audio Out
    • White : Video Out
    SKU: GPC03-90
    €7.00
    inc. VAT

     IN STOCK

Manufacturers