AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • CNC Bi-Directional RC Electric Fuel Pump for Nitro or Gas

    CNC Bi-Directional RC Electric Fuel Pump for Nitro or Gas

    CNC Electric Bi-Directional Fuel Pump for Nitro/Gas RC (XT60 Connector)

    Key Features:


    Treaded fuel cap design allows direct installation to Fuel Bottle (CoolPower/Cosmo/Top Power)
    All metal core for long live.
    Unibody Design to prevent cross contamination.
    Ready for both Nitro and Gasoline.
    Bi-Direction Fuel Pump.
    Operating voltage: 3.7 - 7.4 V (Can be powered by 1S- 2S LiPo).
    Convenient XT60 Connector (Female).
    Flow Rate: Up to 1000CC/Minutes.
    Ultra Portable:186g.
    Factory Setting:  "-" is forward , "=" is Reverse
    Operating Instruction:
    Start with slow speed (~3.7 V).
    After the pump filled with switch to high speed (Up to 7.4V ).
    For maximum performance, keep length of fuel line at Fuel Clunk less than 30cm.

    • High Quality CNC Metal
    • Plug-m-play
    • Easy to Install
    • Select Your Fuel Flow Rate
    • All Screws and Zip Ties Incluted

    Caution:
    The core of this pump is made of high precision and high speed mechanical components; make sure the fuel is clean (Use Fuel Filter as needed).
    The Fuel follows through the pump lubricates the mechanical components of the pump. Don't keep the pump running without pumping any fuel; it could cause excessive wear and tear to the mechanical components of the pump
    Do not pump high temperature fuel/fluid, thermo expansion could cause excessive wear and tear to the mechanical components of the pumps.

    SKU: HY3604
    €69.00
    inc. VAT

     IN STOCK
  • CNC electric fuel pump for nitro or gas fuel rc planes cars boats

    CNC electric fuel pump for nitro or gas fuel rc planes cars boats

    High quality CNC electric fuel pump is designed for nitro or gas for rc models like planes, boats or cars.

    Specs:

    •     Working Voltage: 4.8-6v
    •     Flowrate: 1000cc/minute
    •     Lift: 0.8M
    •     Weight: 175g

    Product Features:

    • All-metal gear parts= long life
    • Fully enclosed motor design, high security;
    • Fully shielded metal housing, no interference;
    • Reverse switch
    • High efficiency, low operational voltage 4.8v
    • Comes with mounting brackets, screws can also be fixed with cable ties can be used;
    • Polyurethane seals, fits methanol or gasoline
    SKU: AV013A-03602
    €49.00
    inc. VAT

     IN STOCK
  • CNC metal Carbon Arm Multicopter 45cm for single or double motor

    CNC metal Carbon Arm Multicopter 45cm for single or double motor

    This is the newest arm for DIY multicopters.

    Best Arm in terms of quality, made 100% in Europe from 6061 Aluminium, the tube itself is made from Carbon. The inserts fits and secures the arm, which allows the part to be solid as rock. The base insert (the part which connecting to the quad), allows the arm to be easily retracted. The motor mount with its very unique design, allows single or double coaxial motor mounting with a special reinforced cnc part inside.

    This unit was tested with over 30kg of force for a long time, to show how strong it is.

    Specifications:

    • Tube length: 45cm (can be shortened if needed)

    Set includes:

    • 1 Tube
    • 1 Base insert
    • 2 Motor mounts
    • 1 Insert
    • Hardware
    SKU: QARM
    €89.00
    inc. VAT

     IN STOCK
  • CNC Metal Pitch Arm set for Logo 480/550

    CNC Metal Pitch Arm set for Logo 480/550

    CNC Metal Pitch Arm set for logo 480/550

    Includes:

    • 2x 6061 pitch arm
    SKU: HC-480MBAR
    €28.99
    inc. VAT

     IN STOCK
  • CNC Metal Pitch Arm set for Logo 600

    CNC Metal Pitch Arm set for Logo 600

    CNC Metal Pitch Arm set for Logo 600

    Includes:

    • 2x 6061 pitch arm (Pre-installed)
    SKU: HC-073R
    €28.99
    inc. VAT

     IN STOCK
  • CNC nitro fuel can cap cover Coolpower, Cosmo, etc

    CNC nitro fuel can cap cover Coolpower, Cosmo, etc

    Fuel cap with fittings , fits Coolpower, Cosmo ( 44mm)

    Please note:

    • These caps will only fit mentioned containers and will NOT fit other brands of fuel bottles
    • These are only made for connecting a fuel pump on the airfield and are not fueltight for transport.
    SKU: HY01902
    €19.50
    inc. VAT

     IN STOCK
  • CNC Prop Hub Reducer adaptor 6mm to 8mm (4pcs)

    CNC Prop Hub Reducer adaptor 6mm to 8mm (4pcs)

    These Metal cnc bore size reducers are designed for all 8mm hub propellers, allowing them to be fitted to various shaft sizes whilst maintaining accurate centering.

    They are also suitable for Graupner Elektro propellers and many other propellers with 8mm bore.

    Packet contents: -

      4 × 8mm to 6mm propeller CNC metal hub inserts

    Specification:

    •  Outside Diameter: 8mm
    •  Inside Diameter: 6mm
    SKU: SPACER68
    €6.00
    inc. VAT

     IN STOCK
  • Collapsible folding GPS Antenna Mount without stand

    Collapsible folding GPS Antenna Mount without stand

    Collapsible folding GPS Antenna Mount without stand

    •   Collapsible design
    •   Compatible with 4mm GPS antenna mount.
    •   T6 aluminum
    •   Weight only 4gr
    •   Silver color
    SKU: AV0130A-04201
    €9.00
    inc. VAT

     IN STOCK
  • Colored finish Carbon fiber tube 20x18mm, 1000mm long

    Colored finish Carbon fiber tube 20x18mm, 1000mm long

    Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color.

    Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

    Carbon Fiber 3k tube in White or Light Yellow color.
    Size : 20 mm OD, 18mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

      Size:20mm out diameter 18mm inner diameter
      Length: 1000mm
      100% Carbon Fiber
      Quantity: 1pc


    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-2018WHITE
    €19.90
    inc. VAT

     IN STOCK
  • Colored finish Carbon fiber tube 30x28mm, 1000mm long

    Colored finish Carbon fiber tube 30x28mm, 1000mm long

    Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color.
    Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

    Carbon Fiber 3k tube in Color finish
    Size : 30 mm OD,28mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:30mm out diameter 28mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!
    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-3028WHITE
    €32.00
    inc. VAT

     IN STOCK
  • Connector JST plug male-female

    Connector JST plug male-female

    JST type connector kit including male and female plug.

    Included: 1 Male Housing with 2 Connectors.

    1 Female Housing with 2 Connectors

    SKU: MU71314-5
    €1.00
    inc. VAT

  • Countersunk head screw Nylon M4x20

    Countersunk head screw Nylon M4x20

    Nylon Screws - Countersunk head screw  M4x20

    Set of 10 Screws.

    SKU: NHC4x20
    €4.00
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x10 (10 pcs)

    Countersunk Hex screw M3x10 (10 pcs)

    Countersunk Hex screw M3x10 (10 pcs)

    SKU: EF79912310
    €2.50
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x12 (10 pcs)

    Countersunk Hex screw M3x12 (10 pcs)

    Countersunk Hex screw M3x12 (10 pcs)

    SKU: EF106422312
    €2.50
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x14 (10 pcs)

    Countersunk Hex screw M3x14 (10 pcs)

    Countersunk Hex screw M3x14 (10 pcs)

    SKU: EF79912314
    €2.50
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x16 (10 pcs)

    Countersunk Hex screw M3x16 (10 pcs)

    Countersunk Hex screw M3x16 (10 pcs)

    SKU: EF79912316
    €2.50
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x20 (10 pcs)

    Countersunk Hex screw M3x20 (10 pcs)

    Countersunk Hex screw M3x20 (10 pcs)

    SKU: EF106422320
    €3.00
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x25 (10 pcs)

    Countersunk Hex screw M3x25 (10 pcs)

    Countersunk Hex screw M3x25 (10 pcs)

    SKU: EF79912325
    €3.00
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x6 (10 pcs)

    Countersunk Hex screw M3x6 (10 pcs)

    Countersunk Hex screw M3x6 (10 pcs)

    SKU: EF10642236
    €2.50
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M3x8 (10 pcs)

    Countersunk Hex screw M3x8 (10 pcs)

    Countersunk Hex screw M3x8 (10 pcs)

    SKU: EF10642238
    €2.50
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M4x10 (10 pcs)

    Countersunk Hex screw M4x10 (10 pcs)

    Countersunk Hex screw M4x10 (10 pcs)

    SKU: EF79912410
    €3.00
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M4x16 (10 pcs)

    Countersunk Hex screw M4x16 (10 pcs)

    Countersunk Hex screw M4x16 (10 pcs)

    SKU: EF106422416
    €3.00
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M4x20 (10 pcs)

    Countersunk Hex screw M4x20 (10 pcs)

    Countersunk Hex screw M4x20 (10 pcs)

    SKU: EF106422420
    €3.00
    inc. VAT

     IN STOCK
  • Countersunk Hex screw M4x25 (10 pcs)

    Countersunk Hex screw M4x25 (10 pcs)

    Countersunk Hex screw M4x25 (10 pcs)

    SKU: EF106422425
    €3.00
    inc. VAT

     IN STOCK

Manufacturers