AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • CARBON Propeller set 16x5.5 T-motor style CW+CCW

    CARBON Propeller set 16x5.5 T-motor style CW+CCW

    Multicopter T-motor style (flat center) Pair of 16x5.5 Carbon Fiber Propellers CW/CCW

    Specifications:

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 16x5.5 cw, 16x5.5 ccw
    • High gloss 3K finish
    • Very strong and light weight
    • Included : Pair: 1 CW, 1 CCW

     

    SKU: TMPROP1655
    €35.00
    inc. VAT

     IN STOCK
  • Carbon Steel  Finish E-Clip

    Carbon Steel Finish E-Clip

    The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. The three prongs of the E-Clip make contact with the bottom of the groove and provide a shoulder for effective retention of the assemblies.

    Standard material: Carbon Spring Steel SAE 1060-109
    Standard Finish: Phosphate and Oil Benefits
    Cost effective replacement, durable, removable.

    Assortment of E-Clips. Pack of 10 pcs, Sizes of #2-2.5-3-4-5-6 ( Size sometimes shown as # symbol )

    SKU: ECLIPS1
    €1.90
    inc. VAT

     IN STOCK
  • Carbon Tail boom 22mm DIY ,fits all helis with 22mm tail boom , 900mm long

    Carbon Tail boom 22mm DIY ,fits all helis with 22mm tail boom , 900mm long

    This lightweight carbon fiber boom in 22mm diameter, with a wall thickness of 1mm. it is 900mm long, and can be easily cut to fit any helicopter or drone.
    It is made from high modulus carbon fiber, encased in an epoxy matrix, and cured at high temperature.

    This high quality carbon boom , is extremely rigid and strong, and yet very light weight

    This boom is made for Helicopters as tail tube boom, Or Drones which is very strong and light.
    it is made especially with multi layers to allow stress points when in hard 3d flights.


    Specifications:
    Boom Diameter 22mm
    Length:900mm

    Multi layer carbon material with Matte finish

     

    SKU: RTB-2220
    €22.00
    inc. VAT

     IN STOCK
  • Carbon Tail boom 25mm DIY ,fits all helis with 25mm tail boom , 900mm long

    Carbon Tail boom 25mm DIY ,fits all helis with 25mm tail boom , 900mm long

    This lightweight carbon fiber boom in 25mm diameter, with a wall thickness of 1mm. it is 900mm long, and can be easily cut to fit any helicopter or drone.
    It is made from high modulus carbon fiber, encased in an epoxy matrix, and cured at high temperature.

    This high quality carbon boom , is extremely rigid and strong, and yet very light weight

    This boom is made for Helicopters as tail tube boom, Or Drones which is very strong and light.
    it is made especially with multi layers to allow stress points when in hard 3d flights.


    Specifications:
    Boom Diameter 25mm
    Length:900mm

    Multi layer carbon material with Matte finish

     

    SKU: RTB-2523
    €24.00
    inc. VAT

     IN STOCK
  • Carbon tube 30x28 1000mm Matt finish

    Carbon tube 30x28 1000mm Matt finish

    Carbon Fiber 3k tube in Matt finish. size : 30 mm OD,28mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:30mm out diameter 28mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-3028
    €29.00
    inc. VAT

     IN STOCK
  • Carbon tube 40X37mm 1000mm long Matt finish

    Carbon tube 40X37mm 1000mm long Matt finish

    Carbon Fiber 3k tube in Matt finish. size : 40 mm OD,37 mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Multicopter tube, and more

    Specifications:

    •   Size:40mm out diameter 37mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-4037
    €39.00
    inc. VAT

     IN STOCK
  • Carry case for your DJI Phantom 2 & 3 Multicopter

    Carry case for your DJI Phantom 2 & 3 Multicopter

    Carry case for your DJI Phantom 2 & 3 Multicopter


    THE case for your DJI Phantom Copter.
    The prefabricated foam insert fits the DJI Phantom 3, DJI Phantom 2, DJI Phantom 2 Vision and the DJI Phantom 2 Vision+ (Props have to be removed).

    • Case shells made of polypropylene
    • Automatic air pressure compensation valve
    • 2 latches
    • 1 padded handle
    • Temperatures ranging from -40° up to +80° C
    • Very sturdy, stackable
    • Dustproof, watertight
    • 30 years guarantee

    Specifications:

    • Interior 473 x 351 x 197 mm
    • Outer 510 x 419 x 215 mm
    • Volume     32.6 L
    • Weight [net] ca. 3.95 kg
    • Payload 25.00 kg
    SKU: BW-1.5023/B/DJI3
    €159.00
    inc. VAT

     LOW STOCK
  • Carry case Large for your DJI Phantom 2 & 3 Multicopter

    Carry case Large for your DJI Phantom 2 & 3 Multicopter

    Carry case Large for your DJI Phantom 2 & 3 Multicopter

    The case for your DJI Phantom Copter.

    Features:

    • The prefabricated foam insert fits the DJI Phantom 2, DJI Phantom 2 Vision and the DJI Phantom 2 Vision+. NOW: Also available for the new DJI Phantom 3!
    • The necessary accessories such as a 7 inch monitor or the GoPro Actioncam also find space in this case
    • case shells made of polypropylene
    • automatic air pressure compensation valve
    • transparent name plate
    • 4 latches
    • 3 handles plus telescopic handle
    • 2 wheels
    • temperatures ranging from -40° up to +80° C
    • very sturdy, stackable
    • dustproof, watertight
    • 30 years guarantee

    Specifications:

    • Interior 534 x 357 x 225 mm
    • Outer 609 x 428 x 263 mm
    • Volume     42.8 L
    • Weight [net]  ca. 6.84 kg
    • Payload 35.00 kg
    SKU: BW-6700/B/DJI3
    €199.00
    inc. VAT

     LOW STOCK
  • CC3D Flight Controller Mini Power Distribution Board PCB

    CC3D Flight Controller Mini Power Distribution Board PCB

    Power Distribution  Board for CC3D flight controller

    Features:

    • Mini size,Light weight.(only 3.5g)
    • The same size  and hole location as CC3D
    • Integrated 2 switch to control LED and FPV equipments

    Package included:

    1 x CC3D flight controller  Distribution Power Board

    SKU: SKY2015
    €6.00
    inc. VAT

     IN STOCK
  • CFK fork servo lever 25mm Futaba

    CFK fork servo lever 25mm Futaba

    CFK fork servo lever 25mm Futaba

    Specifications:

    • Fork servo lever with precise teeth (variant).
    • Gap servo driven ball center to 25mm.
    • Fork opening 5 mm.
    • Weight 0.8g.
    • Comes with built-in ball joint and M2 screw with lock nut.
    • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992604FU
    €6.00
    inc. VAT

     IN STOCK
  • CFK fork servo lever 30mm Futaba

    CFK fork servo lever 30mm Futaba

    CFK fork servo lever 30mm Futaba

    Specifications:

    • Fork servo lever with precise teeth (variant).
    • Gap servo driven ball center to 30mm.
    • Fork opening 5 mm.
    • Weight 1.5g.
    • Comes with built-in ball joint and M2 screw with lock nut.
    • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992605FU
    €6.00
    inc. VAT

     IN STOCK
  • CFK fork servo lever 38mm Futaba

    CFK fork servo lever 38mm Futaba

    CFK fork servo lever 38mm Futaba

    Specifications:

    • Gap servo driven ball center to 38mm.
    • Fork opening 6mm.
    • Fork hole for M3 thread. Weight 3g.
    • Comes with built-in ball joint
    • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
    • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992801FU
    €9.00
    inc. VAT

     IN STOCK
  • CFK fork servo lever 46mm Futaba

    CFK fork servo lever 46mm Futaba

    CFK fork servo lever 46mm Futaba

    Specifications:

    • Gap servo driven ball center to 46mm.
    • Fork opening 6mm.
    • Fork hole for M3 thread. Weight 3.5g.
    • Comes with built-in ball joint
    • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
    • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992802FU
    €9.00
    inc. VAT

     IN STOCK
  • Charge & Balance Cable for T-Rex 150

    Charge & Balance Cable for T-Rex 150

    Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for your 2S battery pack. Connect to your battery with the JST-XH connector, as used in the T-Rex 150. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. Top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    Specifications

    •   Input Charge Connector: Male 4mm Banana Plug
    •   Input Balance Connector: Male 2S JST-XH
    •   Output Connector: Female 2S JST-XH
    •   Wire Type: 22 AWG Silicone
    •   Length: 20CM
    SKU: SKU48601
    €5.00
    inc. VAT

     IN STOCK
  • Charge adaptor six port MCPX

    Charge adaptor six port MCPX

    SPECIAL Charging cable adapter for blade MCPX, handling 6 batteries .

    Insure you use same capacity batteries to charge sufficiently.
    produced from 18 awg silicone cables for best quality and low resistance.
    SKU: PHR023-BRS
    €6.00
    inc. VAT

     IN STOCK
  • Charge cable with Banana connector

    Charge cable with Banana connector

    Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

    Directly connect to your charger with Banana 4mm bullet connectors, and bare wires to connect any of your desired connectors.
    50cm of heavy-duty 12 AWG silicone wire gives you the flexibility to work in any charging setup.

    Specifications

    •   Input Connector: Male 4mm Banana Plug
    •   Output Connector: Bare wires
    •   Wire Type: 12 AWG Silicone
    •   Length: 50cm
    SKU: KRB669C
    €5.00
    inc. VAT

     IN STOCK
  • Charge Lead Multi Charging Cable adaptor 12-In-1

    Charge Lead Multi Charging Cable adaptor 12-In-1

    The next generation of our 12 IN 1 Multi- Adapter, This adaptor is "All in one" features 4mm banana plugs that fit most chargers,
    And its nicely split into 12 different types of plugs on the other end.

    Includes the following connectors:

    4mm Silicone Wire with Banana connector towards the charger, splitted to 12 different connectors:

    • EC3 gold connector
    • T- male mini deans
    • Futaba TX connector
    • JR/Spektrum TX connector
    • Futaba RX connector
    • JR/ Spektrum RX connector
    • JST 2 pin connector
    • EC5 gold connector
    • XT60 connector
    • 6mm Gold connector
    • 4mm Gold connector
    • BARE leads- connect any of your..

    Take the mess out of your charging with this charger adaptor.

    SKU: KRB668
    €11.00
    inc. VAT

     IN STOCK
  • Charge x6 Cable Blade 130X

    Charge x6 Cable Blade 130X

    The parallel charge leads allow you to charge up to six battery packs simultaneously.
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 6 of your 2S battery packs. Connect to your batteries with the connectors, as used in the Blade 130X, Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    SKU: AV1322
    €8.50
    inc. VAT

     IN STOCK
  • Charging adapter XT60 Female to XT30 Male

    Charging adapter XT60 Female to XT30 Male

    Charging adapter XT60 Female to XT30 Male

    This extending adapter is very helpful when you need to convert a charging cable XT60 to Battery XT30 plug

    SKU: XT60XT30CHARGE
    €4.00
    inc. VAT

     IN STOCK
  • Chrome Vanadium Steel Ball link Plier for RC Helicopter

    Chrome Vanadium Steel Ball link Plier for RC Helicopter

    These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open.
    Not only the best we've used, also the best value!

    High quality chrome vanadium steel material , Slip-resistant handle, easy to hold it and operate.
    Suits for RC helicopter DIY

    Specifications:
    Material: Chrome vanadium steel
    Size: 16.7*7.5*1cm
    Weight: 180g

    SKU: DH-T039
    €15.00
    inc. VAT

  • CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set

    CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set

    CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set, 2 pcs, TX+RX.

    Designed for FPV applications.
    This offers better looks and excellent protection.
    Easy to setup and use standard SMA and RP-SMA connectors.

    Description:
    SWR≤1.5   
    Weight:13g   
    Connect: SMA(needle inside) or RP-SMA(hole inside)
    Size: TX 8cm,  RX 12cm

    SKU: CL-58
    €18.00 €35.00
    inc. VAT

     IN STOCK
  • CNC Alu Main Rotor Grips for Mikado Logo 500-550 series

    CNC Alu Main Rotor Grips for Mikado Logo 500-550 series

    The best you can allow- CNC tuning Arms set for Logo helicopters. Now you can fly complete Alu CNC head.

    Produced in Europe, made from 7075 material, in black anodized finish to fit the existing Mikado logo head.

    Those arms will use existing bearings and hardware, all you need will be included in the set.
     

    What is the advantage of CNC metal over plastic? Tests reports pointed on mainly those advantages:

    •  Less flex , means more precise flying performance.
    •  No influence of weather, e.g hot weather will not make the grips softer and vice versa.
    •  Silent- been smaller than Plastic, less drag and better flying noise, Efficiency..

    Stainless inserts will insure perfect support for blade screws by removing inertia load.

    This arm set for Mikado Logo 500-550 series. Set include 2 Grips with Hardware.
    Bearing and other items to be used from stock head.

    SKU: AVGRIP-500
    €64.90
    inc. VAT

     IN STOCK
  • CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CCW) (1pc)

    CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CCW) (1pc)

    CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CCW) (1pc)

    Mounting the prop on the adapter and the base to the motor and a flick of the prop will thread its self on.

    Specification:
    Direction of rotation: CW / CCW
    color: red
    Product Weight: 7g
    Screw pitch: 12mm
    Screw Size: M3
    Material: Space aluminum

    SKU: CNC-AL-Prop-CCW
    €4.90
    inc. VAT

  • CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CW) (1pc)

    CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CW) (1pc)

    CNC Aluminum Quick Release Self-Tightening Prop Adapters Set - RED (CW) (1pc)

    Mounting the prop on the adapter and the base to the motor and a flick of the prop will thread its self on.

    Specification:
    Direction of rotation: CW / CCW
    color: red
    Product Weight: 7g
    Screw pitch: 12mm
    Screw Size: M3
    Material: Space aluminum

    SKU: CNC-AL-Prop-CW
    €4.90
    inc. VAT

     IN STOCK

Manufacturers