AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • Carbon 3k tube 20x18mm, Matte finish 900mm long

    Carbon 3k tube 20x18mm, Matte finish 900mm long

    Carbon Fiber 3k tube in Matt finish. size : 20 mm OD, 18mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    • Size:20mm out diameter 18mm inner diameter
    • Length: 900mm
    • 100% Carbon Fiber
    • Quantity: 1 tube

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-2018
    €18.00
    inc. VAT

     IN STOCK
  • Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

    Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

    Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

    Specifications:

    • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 4x2.5mm), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
    • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 4x2.5mm eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
    • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
    • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
    • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
    • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
    • The CFRP ball joint adapter can be painted easily.
    • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
    • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
    • The result is a high strength component, which does not bear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All CFRP components are manufactured in Germany using the latest CNC machines.
    SKU: GA-992003
    €8.00
    inc. VAT

     IN STOCK
    NEW
  • Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

    Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

    Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

    Specifications:

    • Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
    • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 5x3), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
    • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 3x5 eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
    • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
    • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
    • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
    • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
    • The CFRP ball joint adapter can be painted easily.
    • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
    • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
    • The result is a high strength component, which does not bear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All CFRP components are manufactured in Germany using the latest CNC machines.
    SKU: GA-992002
    €8.00
    inc. VAT

     IN STOCK
    NEW
  • Carbon Fiber PTZ Anti-vibration Frame Set Absorber for DJI Phantom Quadcopter

    Carbon Fiber PTZ Anti-vibration Frame Set Absorber for DJI Phantom Quadcopter

    New Carbon Fiber PTZ Anti-Vibration Frame Set for DJI Phantom Quadcopter:

    • Material:Carbon fiber
    • Compact design, Gopro compatible as picture shown
    • With anti-vibration plate +Rubber ball set to reduce vibration and improve photography quality
    • Super light weight!
    • Dedicated for DJI Phantom Quadcopter

    SKU: DJIPH002
    €18.00
    inc. VAT

     LOW STOCK
  • Carbon fibre tube 15x13mm ,1000mm long

    Carbon fibre tube 15x13mm ,1000mm long

    Carbon Fiber 3k tube in Matt finish. size : 15 mm OD, 13mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:15mm out diameter 13mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc
    SKU: RCMC-1513
    €16.00
    inc. VAT

     IN STOCK
  • Carbon MultiRotor Props 15x5.5 (set L+R) CW+CCW

    Carbon MultiRotor Props 15x5.5 (set L+R) CW+CCW

    Ultra Strong and light full Carbon Weave professional multirotor props. These are the stiffest, strongest props you'll find anywhere at this weight.

    Size: 15x5.5

    set of Left and right Props

    SKU: CFMP1555FL
    €31.00
    inc. VAT

  • Carbon MultiRotor Props 16 x 5,5 (set L+R) CW+CCW

    Carbon MultiRotor Props 16 x 5,5 (set L+R) CW+CCW

    Ultra Strong and light full Carbon Weave professional multirotor props. These are the stiffest, strongest props you'll find anywhere at this weight.

    Size: 16x5.5

    set of Left and right Props

    SKU: CFMP1655FL
    €33.00
    inc. VAT

     LOW STOCK
  • CARBON Propeller set 12x5.5 T-motor style CW+CCW

    CARBON Propeller set 12x5.5 T-motor style CW+CCW

    T-motor style (flat center) Pair of  12X5.5 Carbon Fiber Propellers CW/CCW for multicopter

    Specifications:
     

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 12X5.5 cw, 12x5.5ccw
    • High gloss 3K finish
    • Very strong and light weight

    Included : Pair: 1 CW, 1 CCW

    SKU: TMPROP1255
    €18.00
    inc. VAT

     IN STOCK
  • CARBON Propeller set 13x5.5 T-motor style CW+CCW

    CARBON Propeller set 13x5.5 T-motor style CW+CCW

    Multicopter T-motor style (flat center) Pair of  13X5.5 Carbon Fiber Propellers CW/CCW

    Specifications:

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 13X5.5 cw, 13x5.5ccw
    • High gloss 3K finish
    • Very strong and light weight
    • Included : Pair: 1 CW, 1 CCW

     

    SKU: TMPROP1355
    €18.00
    inc. VAT

     IN STOCK
  • CARBON Propeller set 14x5.5 T-motor style CW+CCW

    CARBON Propeller set 14x5.5 T-motor style CW+CCW

    Multicopter T-motor style (flat center) Pair of  14X5.5 Carbon Fiber Propellers CW/CCW

    Specifications:

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 14X5.5 cw, 14x5.5ccw
    • High gloss 3K finish
    • Very strong and light weight
    • Included : Pair: 1 CW, 1 CCW

     

    SKU: TMPROP1455
    €19.90
    inc. VAT

     IN STOCK
  • CARBON Propeller set 15x5.5 T-motor style CW+CCW

    CARBON Propeller set 15x5.5 T-motor style CW+CCW

    Multicopter T-motor style (flat center) Pair of  15X5.5 Carbon Fiber Propellers CW/CCW

    Specifications:

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 15X5.5 cw, 15X5.5ccw
    • High gloss 3K finish
    • Very strong and light weight
    • Included : Pair: 1 CW, 1 CCW

     

    SKU: TMPROP1555V2
    €19.90
    inc. VAT

     IN STOCK
  • CARBON Propeller set 15x6.5 T-motor style CW+CCW

    CARBON Propeller set 15x6.5 T-motor style CW+CCW

    Multicopter T-motor style (flat center) Pair of  15X6.5 Carbon Fiber Propellers CW/CCW

    Specifications:

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 15X6.5 cw, 15X6.5ccw
    • High gloss 3K finish
    • Very strong and light weight
    • Included : Pair: 1 CW, 1 CCW

     

    SKU: TMPROP1565
    €19.90
    inc. VAT

     72HR STOCK
  • CARBON Propeller set 16x5.5 T-motor style CW+CCW

    CARBON Propeller set 16x5.5 T-motor style CW+CCW

    Multicopter T-motor style (flat center) Pair of 16x5.5 Carbon Fiber Propellers CW/CCW

    Specifications:

    • Material: Carbon fiber
    • Epoxy resin cover
    • Size: 16x5.5 cw, 16x5.5 ccw
    • High gloss 3K finish
    • Very strong and light weight
    • Included : Pair: 1 CW, 1 CCW

     

    SKU: TMPROP1655
    €35.00
    inc. VAT

     IN STOCK
  • Carbon Steel  Finish E-Clip

    Carbon Steel Finish E-Clip

    The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. The three prongs of the E-Clip make contact with the bottom of the groove and provide a shoulder for effective retention of the assemblies.

    Standard material: Carbon Spring Steel SAE 1060-109
    Standard Finish: Phosphate and Oil Benefits
    Cost effective replacement, durable, removable.

    Assortment of E-Clips. Pack of 10 pcs, Sizes of #2-2.5-3-4-5-6 ( Size sometimes shown as # symbol )

    SKU: ECLIPS1
    €1.90
    inc. VAT

     IN STOCK
  • Carbon Tail boom 22mm DIY ,fits all helis with 22mm tail boom , 900mm long

    Carbon Tail boom 22mm DIY ,fits all helis with 22mm tail boom , 900mm long

    This lightweight carbon fiber boom in 22mm diameter, with a wall thickness of 1mm. it is 900mm long, and can be easily cut to fit any helicopter or drone.
    It is made from high modulus carbon fiber, encased in an epoxy matrix, and cured at high temperature.

    This high quality carbon boom , is extremely rigid and strong, and yet very light weight

    This boom is made for Helicopters as tail tube boom, Or Drones which is very strong and light.
    it is made especially with multi layers to allow stress points when in hard 3d flights.


    Specifications:
    Boom Diameter 22mm
    Length:900mm

    Multi layer carbon material with Matte finish

     

    SKU: RTB-2220
    €22.00
    inc. VAT

     IN STOCK
  • Carbon Tail boom 25mm DIY ,fits all helis with 25mm tail boom , 900mm long

    Carbon Tail boom 25mm DIY ,fits all helis with 25mm tail boom , 900mm long

    This lightweight carbon fiber boom in 25mm diameter, with a wall thickness of 1mm. it is 900mm long, and can be easily cut to fit any helicopter or drone.
    It is made from high modulus carbon fiber, encased in an epoxy matrix, and cured at high temperature.

    This high quality carbon boom , is extremely rigid and strong, and yet very light weight

    This boom is made for Helicopters as tail tube boom, Or Drones which is very strong and light.
    it is made especially with multi layers to allow stress points when in hard 3d flights.


    Specifications:
    Boom Diameter 25mm
    Length:900mm

    Multi layer carbon material with Matte finish

     

    SKU: RTB-2523
    €24.00
    inc. VAT

     IN STOCK
  • Carbon tube 30x28 1000mm Matt finish

    Carbon tube 30x28 1000mm Matt finish

    Carbon Fiber 3k tube in Matt finish. size : 30 mm OD,28mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:30mm out diameter 28mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-3028
    €29.00
    inc. VAT

     IN STOCK
  • Carbon tube 40X37mm 1000mm long Matt finish

    Carbon tube 40X37mm 1000mm long Matt finish

    Carbon Fiber 3k tube in Matt finish. size : 40 mm OD,37 mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Multicopter tube, and more

    Specifications:

    •   Size:40mm out diameter 37mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-4037
    €39.00
    inc. VAT

     IN STOCK
  • Carry case for your DJI Phantom 2 & 3 Multicopter

    Carry case for your DJI Phantom 2 & 3 Multicopter

    Carry case for your DJI Phantom 2 & 3 Multicopter


    THE case for your DJI Phantom Copter.
    The prefabricated foam insert fits the DJI Phantom 3, DJI Phantom 2, DJI Phantom 2 Vision and the DJI Phantom 2 Vision+ (Props have to be removed).

    • Case shells made of polypropylene
    • Automatic air pressure compensation valve
    • 2 latches
    • 1 padded handle
    • Temperatures ranging from -40° up to +80° C
    • Very sturdy, stackable
    • Dustproof, watertight
    • 30 years guarantee

    Specifications:

    • Interior 473 x 351 x 197 mm
    • Outer 510 x 419 x 215 mm
    • Volume     32.6 L
    • Weight [net] ca. 3.95 kg
    • Payload 25.00 kg
    SKU: BW-1.5023/B/DJI3
    €159.00
    inc. VAT

     LOW STOCK
  • Carry case Large for your DJI Phantom 2 & 3 Multicopter

    Carry case Large for your DJI Phantom 2 & 3 Multicopter

    Carry case Large for your DJI Phantom 2 & 3 Multicopter

    The case for your DJI Phantom Copter.

    Features:

    • The prefabricated foam insert fits the DJI Phantom 2, DJI Phantom 2 Vision and the DJI Phantom 2 Vision+. NOW: Also available for the new DJI Phantom 3!
    • The necessary accessories such as a 7 inch monitor or the GoPro Actioncam also find space in this case
    • case shells made of polypropylene
    • automatic air pressure compensation valve
    • transparent name plate
    • 4 latches
    • 3 handles plus telescopic handle
    • 2 wheels
    • temperatures ranging from -40° up to +80° C
    • very sturdy, stackable
    • dustproof, watertight
    • 30 years guarantee

    Specifications:

    • Interior 534 x 357 x 225 mm
    • Outer 609 x 428 x 263 mm
    • Volume     42.8 L
    • Weight [net]  ca. 6.84 kg
    • Payload 35.00 kg
    SKU: BW-6700/B/DJI3
    €199.00
    inc. VAT

     LOW STOCK
  • CC3D Flight Controller Mini Power Distribution Board PCB

    CC3D Flight Controller Mini Power Distribution Board PCB

    Power Distribution  Board for CC3D flight controller

    Features:

    • Mini size,Light weight.(only 3.5g)
    • The same size  and hole location as CC3D
    • Integrated 2 switch to control LED and FPV equipments

    Package included:

    1 x CC3D flight controller  Distribution Power Board

    SKU: SKY2015
    €6.00
    inc. VAT

     IN STOCK
  • CFK fork servo lever 25mm Futaba

    CFK fork servo lever 25mm Futaba

    CFK fork servo lever 25mm Futaba

    Specifications:

    • Fork servo lever with precise teeth (variant).
    • Gap servo driven ball center to 25mm.
    • Fork opening 5 mm.
    • Weight 0.8g.
    • Comes with built-in ball joint and M2 screw with lock nut.
    • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992604FU
    €6.00
    inc. VAT

     IN STOCK
    NEW
  • CFK fork servo lever 30mm Futaba

    CFK fork servo lever 30mm Futaba

    CFK fork servo lever 30mm Futaba

    Specifications:

    • Fork servo lever with precise teeth (variant).
    • Gap servo driven ball center to 30mm.
    • Fork opening 5 mm.
    • Weight 1.5g.
    • Comes with built-in ball joint and M2 screw with lock nut.
    • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992605FU
    €6.00
    inc. VAT

     IN STOCK
    NEW
  • CFK fork servo lever 38mm Futaba

    CFK fork servo lever 38mm Futaba

    CFK fork servo lever 38mm Futaba

    Specifications:

    • Gap servo driven ball center to 38mm.
    • Fork opening 6mm.
    • Fork hole for M3 thread. Weight 3g.
    • Comes with built-in ball joint
    • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
    • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992801FU
    €9.00
    inc. VAT

     IN STOCK
    NEW

Manufacturers